better bathrooms MATI640 Matira Vanity Unit And Storage User Manual
- June 17, 2024
- Better Bathrooms
Table of Contents
better bathrooms MATI640 Matira Vanity Unit And Storage
Specifications
- Product Codes: MATI640, MATI1240, MATI640BL, MATI1240BL, MATI640FS, MATI1240FS, MATI640FSBL, MATI1240FSBL
- Maximum Loading: Unit – 100kgs (Including top/basin weight), Each Drawer – 20kgs
Product Description
The Matira Vanity Unit and Storage is a versatile storage solution for your
bathroom. It comes in various sizes and finishes to suit your preferences. The
unit includes drawers with a push-to-open mechanism for easy access.
Contents
- MATI640: Wall Screw x6, Wall Plug x6, Wall Bracket x2
- MATI1240: Wall Screw x9, Wall Plug x9, Wall Bracket x3
- MATI640BL: Wall Screw x6, Wall Plug x6, Wall Bracket x2
- MATI1240BL: Wall Screw x9, Wall Plug x9, Wall Bracket x3
- MATI640FS: Wall Screw x2, Wall Plug x2, Brass Washer x2, Screw Cap x2, Plastic Washer x2
- MATI1240FS: Wall Screw x2, Wall Plug x2, Brass Washer x2, Screw Cap x2, Plastic Washer x2
- MATI640FSBL: Wall Screw x2, Wall Plug x2, Brass Washer x2, Screw Cap x2, Plastic Washer x2
- MATI1240FSBL: Wall Screw x2, Wall Plug x2, Brass Washer x2, Screw Cap x2, Plastic Washer x2
Product Usage Instructions
Tools Required
Before starting the installation, make sure you have the following tools: 8mm
Drill bit (not supplied)
Cabinet Installation
- Ensure that the room where the unit is being installed is well-ventilated.
- Check for pipes and cables before drilling.
- Mark the position of the brackets on the wall.
- Drill holes in the wall using an 8mm drill bit to a depth of approximately 50mm.
- Insert the wall plugs and tap them flush with the wall surface.
- Secure the wall brackets into place.
- Make sure the brackets fitted to the unit are fully tightened.
Countertop Installation
To install the unit with a countertop:
- Ensure that the basin hole has been drilled and there is no tap hole.
- Before installing the countertop, confirm that your selected basin will fit on the countertop.
- If you need to match a tap, drill a tap hole according to your tap specifications, and seal the drilled edge.
- Fit the countertop to the unit by applying a bead of silicone between the unit and countertop to provide a seal and fixing.
- Run a bead of silicone along the back edge of the base where it meets the wall.
- Allow the silicone to dry for 24 hours before using the unit.
Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep for future reference.
- Multi-person assembly
- Tools required
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers We’re on a mission to bring
you extraordinary bathroom products, for less. From modern to traditional
style ceramics, plus the gorgeous fixtures, fittings and furniture to match.
So, you can fall in love with your space every single day. As one of the UK’s
largest independent bathroom stores, we’ve received countless awards;
including the National Business Awards UK, the Digital Entrepreneur Awards,
and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- Always check for pipes and cables before drilling
- This product is “PUSH TO OPEN”, do not pull the drawer to open as this can damage the mechanism
Contents
Product| Description| Qty| Description| Qty|
Description| Qty| Description| Qty| Description|
Qty
---|---|---|---|---|---|---|---|---|---|---
MATI640| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| | | |
MATI1240| Wall Screw| 9| Wall Plug| 9| Wall Bracket| 3| | | |
MATI640BL| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| | | |
MATI1240BL| Wall Screw| 9| Wall Plug| 9| Wall Bracket| 3| | | |
MATI640FS| Wall Screw| 2| Wall Plug| 2| Brass washer| 2| Screw cap| 2| Plastic
washer| 2
MATI1240FS| Wall Screw| 2| Wall Plug| 2| Brass washer| 2| Screw cap| 2|
Plastic washer| 2
MATI640FSBL| Wall Screw| 2| Wall Plug| 2| Brass washer| 2| Screw cap| 2|
Plastic washer| 2
MATI1240FSBL| Wall Screw| 2| Wall Plug| 2| Brass washer| 2| Screw cap| 2|
Plastic washer| 2
Maximum loading
- Please noted the maximum loading for unit is 100kgs(Including top/basin weight).
- Please noted the maximum loading for each drawer is 20kgs.
Parts / Diagrams
Tools required
Cabinet installation
- The room in which the unit is being installed, must be well ventilated.
- Please check for pipes and cables prior to drilling, after the position of the brackets is marked, drill the holes in the wall, using an 8mm drill bit(not supplied), to a depth of approx 50mm.
- Insert the wall plugs and tap flush with the wall surface and secure the wall brackets into place.
- Check the brackets fitted to the unit are fully tightened.
Wall Hung Installation
Floor Standing Installation:
Units must be secured to the wall
Countertop installation:
Please note for a countertop installation, the basin hole has been drilled and
there is no tap hole. Before installing the countertop, confirm your selected
basin will fit the countertop. If you need to match a tap, please drill a tap
hole according to your tap and the drilled edge must be sealed. After the
basin hole and tap hole are confirmed, the countertop can be fitted to the
unit, by applying a bead of silicone between the unit and countertop to
provide a seal and fixing for the countertop to the unit. Also, run a bead of
silicone along the back edge of the base where it meets the wall. After
silicone has been applied, this must be left for 24 hours to dry.
Troubleshooting
DRAWER REMOVAL & INSTALLATION
Maintenance and Cleaning
- Wipe the product clean and dry regularly, especially when the product is subject to steam or splashes.
- Do not use harsh chemicals or materials on the product, as this will damage the product and invalidate your guarantee.
- To clean and maintain the product, wipe using a clean damp cloth and wipe dry with a soft cloth.
For more information
visit betterbathrooms.com email customerservices@buyitdirect.co.uk call 0330 390 3062 write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
FAQ’s
What is the maximum loading capacity of the unit and drawers?
The maximum loading capacity for the unit is 100kgs (including top/basin
weight), and each drawer can hold up to 20kgs.
Where can I contact for further assistance or support?
For any further assistance or support, you can contact us via
betterbathrooms.com/content/contact-
us.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>