COMMSCOPE HFT410-4SBVEF-G HELIAX Hybrid Cable Assembly Instructions
- June 17, 2024
- CommScope
Table of Contents
COMMSCOPE HFT410-4SBVEF-G HELIAX Hybrid Cable Assembly
HELIAX® Hybrid Cable Assembly, BiDi, 6-OVP box to RRU, UL Type TC-ER, 4 power conductors 10 AWG at OVP, 1 power cord 8 AWG at RRU, 3 Simplex fiber connectors, FullAXS, PVC jacket, aluminum armor, weather shroud installed, OVP gland insert kit included
Grommet FA-6627-3315-GKHP is required for power cord sealing (not included)
Product Information
Specifications
Product Model: HFT410-3SBVEF-G
Grommet: FA-6627-3315-GKHP (required for power cord sealing, not included)
Product Classification
- Regional Availability: North America
- Product Type: Hybrid cable assembly
- Product Brand: HELIAX®
- Product Series: HFT
- Ordering Note: CommScope® non-standard product
General Specifications
- Conductors, quantity: 4
- Construction Type: Hybrid standard tail LC
- Interface, Connector A: LC
- Interface Feature, connector A: Outdoor
- Interface Body Style, connector A: Straight
- Interface, Connector B: LC
- Interface Feature, connector B: Standard
- Interface Body Style, connector B: Straight
- Jacket Color: Black
- Total Fibers, quantity: 4
Dimensions
- Cable Assembly Length Range (ft): 3 – 400
- Diameter Over Jacket: 18.31 mm | 0.721 in
Mechanical Specifications
- Minimum Bend Radius: 221 mm | 8.701 in
Optical Specifications
- Fiber Type: G.657.A2
- Insertion Loss, typical note: Insertion loss is measured at 1310 and 1550 nm
- Insertion Loss, typical: 0.5
Environmental Specifications
- Operating Temperature: -40 °C to +75 °C (-40 °F to +167 °F)
Packaging and Weights
-
Cable weight: 0.5 kg/m | 0.336 lb/ft
-
Footnotes
Insertion Loss, typical note Insertion loss is measured at a room temp of +20°C (+68°F)
HFT410-4 SBVEF-G
Product Usage Instructions
Step 1: Power Cord Sealing
To ensure proper power cord sealing, use the required grommet FA-6627-3315-GKHP. This grommet is not included with the product and needs to be purchased separately.
Step 2: Installation
Follow the steps below to install and use the product:
- Identify the connectors A and B on the cable assembly.
- Connect the Outdoor Straight LC connector (A) to the appropriate interface.
- If applicable, connect the connector B to its corresponding interface.
- Ensure a secure connection between the connectors and interfaces.
- Place the cable in the desired location, considering the minimum bend radius specified.
FAQ
Q1: Does the product come with the required grommet for power cord sealing?
A1: No, the grommet FA-6627-3315-GKHP for power cord sealing is not included with the product and needs to be purchased separately.
Q2: What is the total number of fibers in the cable assembly?
A2: The cable assembly has a total of 3 fibers.
©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: October 2, 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>