momax AP17S HumiSense IoT Dehumidifier Instruction Manual
- June 17, 2024
- MOMAX
Table of Contents
momax AP17S HumiSense IoT Dehumidifier
Specifications
- Product Name: HumiSense IoT Dehumidifier AP17S
- Connectivity: Wi-Fi
- Control Panel: Power Button, Timer Button, Wind Speed Button
- Indication: Full Water Indication, Power Indication
- Features: Voice Control with Amazon Alexa, Google Assistant, and other platforms
- Tilt Protection: Automatic shut-off and standby mode
- Automatic Shut-down: After 24 hours of continuous operation
- Water Tank Drain Hole: Fit for drain hose with an outer diameter of 11mm and inner diameter of 8mm
Product Usage Instructions
Quick Start Guide
- Download MOMAX Smart APP from the iOS App Store, Android Google Play Store, or other platforms.
- Register an account and log in using your mobile number oremail address.
- Turn on Wi-Fi pairing mode on your device by pressing the power button. When the pairing icon blinks rapidly, it enters pairing mode. If the icon blinks slowly, press the Timer button for a few seconds to switch to pairing mode.
- Once the connection is completed, you will see a symbol appear on the LED screen of the product. You can edit the device name on the APP for easy identification and voice control.
- To connect to a new Wi-Fi network, press and hold the power button for 5 seconds and repeat steps 1-4.
Power On / Off
After plugging in the power, the connectivity indicator will blink for 1
second and then go off. The device enters standby mode.
To turn on the device, press the power button. If you want to turn it off,
press the power button again. The fan will continue to work for 90 seconds
before powering off. It is recommended not to unplug the machine during this
period to ensure proper heat dissipation and product lifespan. The power
indication will display a green color when powered on and a red color when
powered off (standby mode).
Timer Button
Press the timer button to set a 4-hour or 8-hour timer. The device will
automatically turn off after the set time.
Wind Speed Button
When the machine is turned on, it will run in high fan speed by default. Press
the wind speed button to switch between high windspeed and low wind speed. The
machine will remember your last speed setting.
Full Water Indication
If the water tank is full or not installed properly, the full water indication
will light up, and the machine will enter standby mode. Empty or properly
install the water tank to resume operation.
Tilt Protection
If the machine tilts during operation, it will stop working and the fan will
be turned off after a 90-second delay. All buttonswill be invalid during this
time. The machine will re-enter the standby state after being reset.
Automatic Shut-down
The device is programmed to automatically shut down after 24 hours of
continuous operation. This feature ensures energy efficiency and safety.
FAQ (Frequently Asked Questions)
Q: How do I connect the HumiSense IoT Dehumidifier AP17S to voice control
platforms like Amazon Alexa or Google Assistant?
A: To connect with voice control platforms, please follow these steps:
- Open the MOMAX Smart APP.
- Go to “More Services” in the app.
- Select “Voice Service” and choose the desired platform (Amazon Alexa, Google Assistant, etc.).
- Refer to the relevant user manual for voice commands specific to each platform.
Q: What is the drain hole specification for the water tank?
A: The drain hole is designed to fit a drain hose with an outer diameter
of 11mm and an inner diameter of 8mm.
Introduction
The AP17S is a Rotary Desiccant Dehumidifier that is highly efficient and
ultra quiet. It has a 2.4L/day dehumidification capacity and operates at a
noise level as low as 30dB. The device is slim and portable, making it perfect
for tiny living spaces. The device is compressor-free and freon-free, making
it eco-friendly and safe. The device has a visible water tank with a 2.5L
capacity and a drain hose design. The device also features a washable mesh and
innovative rotary tech. It can be controlled using the smart control app and
has an auto shut off feature when full.
Quick Start Guide
-
Download “MOMAX Smart” APP
Download“MOMAX Smart” from iOS App Store, Android Google Play Store or other platforms. -
Register
Register an account and log in using your mobile number or email address. -
Turn on Wi-Fi
Turn on pairing mode on your DevicePress the power button to turn on the device. When the icon“ ”appears and blinks rapidly, it enters pairing mode.
Tips: If the icon is blinking slowly, that means the device is in Hotspot mode. The user can press the Timer button for a few seconds to switch it to pairing mode. -
Wireless Pairing
Mobile: Turn on the Bluetooth and connect with 2.4Ghz Wi-Fi network from mobile.
APP:
Regular Mode – Click “+”to add new deivce on APP, then the app will pop up an icon, click “ Add ” ,and it will be connected automatically. Hotspot Mode – Click “+”to add new deivce on APP, and Select correct category from APP list, enter Wi-Fi name and password.
Connect your mobile to device’s hotspot: “ SmartLife-XXXX ”, then click to return to App’s interface, it will connect Wi-Fi automatically. -
Successfully connected
Once the connection is completed. You will see “ ” symbol appear on the LED screen of the product.
After the match is found, you can edit the name of the device on APP. Tips: The device name should be identifiable and easy to pronounce (voice control). -
Connect to a new Wi-Fi network
Press & hold the power button for 5 secs and follow step 1-5.
Voice Control
This smart device supports voice control with Amazon Alexa, Google
Assistant and other China platform, etc.) To connect with these platforms,
please refer to the App>More Services>Voice Service. Voice commands of each
platform may vary, please refer to the relevant user manual.
Product Overview
NOTE：
Fit for drain hose: outer diameter at 11mm and inner diameter 8mm.
USER GUIDE
-
Preparation
When you plug in the power, the connectivity indicator will blink for 1 second and then go off. The device then enters standby mode. -
Power on / Off
After turning on the device, if the user turns it off, the fan will continue to work for 90 seconds until it powers off. It is recommended not to unplug the machine during this period. Otherwise, insufficient heat dissipation could affect the product’s lifespan.
The power indication will display a green color when powered on, and a red color when powered off (standby mode). -
Timer Button
Press the timer button to set a 4-hour or 8-hour timer. -
Wind Speed button
When turned on the machine, it will run in high fan speed by default, press the button to change the mode between high wind speed and low wind speed.
After that, It will remember your last speed setting. -
Full Water indication
When the water tank is full or water tank is not installed, the water full indication lights up, and the machine enter the standby mode. -
Tilt protection
If the machine tilts while operation, it will stop working and the fan will If the machine tilts while operation, it will stop working and the fan will be turned off after a 90-second , and all buttons will be invalid. It will re- enter the standby state after reset. -
Automatic shut-down
The device will automatically shut down after 24 hours of continuous operation.
MAINTENANCE
- Ensure the device is unplugged before repair and cleaning.
- Do not use abrasive, corrosive, or flammable cleansers (such as alcohol) to clean the device.
CLEANING：
- Wipe the outer surface with neutral detergent and soft cotton , make sure no water drop inside while cleaning .
- Take out the filter, clean it with a vacuum cleaner or water, and dry it in a ventilated area. Do not put the filter in a high-temperature area or under sunlight directly.
STORAGE：
- If product will not be used for a long time, please pour out the water in the tank and unplug the power supply.
- After the device is completely dried , put on a dust cover/bag and place it in a well-ventilated area. Avoid locating it under sunlight.
Specification
- Model No: AP17S
- AC Voltage : 220-240V ~ 50/60Hz
- Rated Power: 340W±10% (Max.)
- Connectivity: 2.4Ghz Wi-Fi
- Water Tank Capacity : 2.5L
- Dehumidification Capacity : 2.4L ±0.1L / day
- Timer: 4/8hours
- Wind speed Level: High / Low Setting
- Noise Level : L≤ 30dB, H≤ 45dB
- Tile protection angle : >30°
- Control Platform: Touch panel/App
- Dehumidification Technology : Rotary desiccant-based
- Power Cord Length: 1.5m±0.1m
- Material : ABS + PC
- Dimension : 254 x 157.5 x 394.7mm
- Weight: 3.7kg ± 0.2kg
Contains
- HumiSense IoT Dehumidifier
- Instruction Manual And Warranty Card
Warnings
Points for attention
Before using, please read this user manual carefully and keep it for future
reference.
- To avoid electric shock and fire, do not allow water, liquid or any flammable detergent to get into or to clean the product.
- Do not spray insecticide, perfume or other flammable sprays around the product.
- When the power cord is damaged. It must be replaced by electrical technicians or professional personnel to avoid danger. Do not use the product when the power cord is damaged .
- Do not block the air inlet and outlet when product is in use. Please leave at leave 30cm of space on the back and front , and 50cm space on top of the product when it is in use.
- The power socket should be well connected before use, otherwise, it will cause overheating on the power plug.
- Do not place any item on top of the product.
- Ensure both the filter and its cover are properly installed before using.
- Do not insert fingers or any objects into the air inlet/outlet to prevent any damage.
- This product is limited to household use. It generally reaches a stable state after 30 to 60min. The room temperature will rise a bit when product is used in a confined space .
Service Agreement of Smart Mobile Application Platform
Please reference Mobile Apps content: Before accepting the Agreement, you are
supposed to thoroughly read all the contents of the Agreement, and fully
understand its terms, especially restrictive clauses or exceptions and Privacy
Notice. Restrictive clauses or exceptions are bold or highlighted in other
forms to catch your attention. In case of any doubt about the terms of the
Agreement, please contact the relevant business department of Tuya. You are
not allowed to use the service before you have read and accepted all the terms
of the Agreement, relevant agreements, and rules, etc. Once you select “agree
and submit the Agreement” (see registration page for detailed wordings) and
complete the registration procedure, or you use the service in any form, it
will be deemed that you have read and agreed with the restriction of the
Agreement and rules above. In case of any breach of the Agreement, Tuya has
the right to unilaterally restrict, suspend or terminate the service for you,
and has the right to investigate your relevant responsibilities.
Disposal of Electronic Products
- Do not place the product as household waste;
- Please dispose of discarded electronic products properly according to local regulations;
- MOMAX encourages you to participate in the electronic recycling program.
Warranty Conditions
- For any defect, in the judgment of our technician, caused under normal use, we are responsible for repairing free of charge 12 months commencing from the date of purchase at the discretion of our company;
- A valid warranty card and original purchase invoice must be presented upon request of warranty service;
- This warranty card shall not apply to the product if:
- It is consumable part(s), such as Filter, or;
- it has explicitly modified or repaired in any way by persons other than technicians of this company, or;
- it has been damaged through misuse, malicious acts, negligence, the inflow of any liquid, or;
- losses or damages are caused by force majeure or natural disasters.
- No alteration to this warranty card will be allowed;
- The warranty terms and conditions are subject to change without prior notice;
- Please retain your proof of purchase for warranty service;
- Please consult the dealer about the product compatibility with your cell phone/ PDA before purchase. Product specifications are subject to change without prior notice;
Please visit www.momax.net for the latest product information.
Copyright 2024 MOMAX Technology Ltd. All rights reserved. MOMAX is registered trademark of MOMAX Technology Ltd. All other trademarks are the property of their respective owners.
Find “AP17S” in MOMAX’s channel
helpdesk.momaxsmart.com
Get step-by-step setup and support.
Watch the latest video tutorial to learn to setup and operate your AP17S.
Keep up to date with the latest updates.