EZCONNEX 4 Port Float Connection System Instruction Manual
- June 4, 2024
- EZCONNEX
Table of Contents
EZCONNEX 4 Port Float Connection System
The EZconnex® float switch connection system is a revolutionary new way to
install float switches in a wet well for level control applications. It
includes an electrical wiring manifold with four quick-release float switch
connection ports, a mounting bracket, and hardware. Installation is as easy as
1, 2, 3…Simply install the manifold, plug in the quick-connect floats, and
wire the manifold cable to the control panel. A single 8-conductor direct
burial cable has Red-Blue-Yellow-White wire pairs that match the R-B-Y-W
colored caps on the manifold housing for easy identification and field wiring.
The color-coded cable makes for a quick, easy installation. The quick-release
float switch connections and mounting bracket allow for easy maintenance and
replacement of floats. The EZconnex® system can be used with 1, 2, 3 or 4
float switches. Each float switch includes a protective rubber boot that
provides a dual seal design for an extra layer of protection to keep
connections clean and dry. A range of wide-angle and narrow-angle float switch
options are available with quick-release connections to suit application needs
(sold separately). Sealing plugs are available for unused manifold ports (sold
separately).
NOTE: Do not install a manifold with open port(s).
FEATURES
- (4) Quick-release float connection ports for easy maintenance in the wet well
- A single 8-conductor direct burial cable with colored wire pairs for easy and clean field wiring of the control panel
- Manifold housing includes Red-Blue-Yellow-White colored caps that match Red-Blue-Yellow-White wire pairs in manifold cable for easy identification and field wiring
- Can be used with 1-4 float switches; sealing plug(s) available for unused manifold port(s)
- Rated for short-term water submersion in water
- Includes mounting bracket; float switches and sealing plugs must be ordered separately
OPTIONS
Manifold Options:
- Standard cable lengths of 25, 50, or 100 ft (7.62, 15.24, or 30.48 m)
- Sealing plug (includes rubber boot) required for the unused port(s)
- Flot Switch Options:
- EZconnex® SJE MilliAmpMaster™ Float switches: these are SJE MilliAmpMaster™ control switches that feature the quick release connection. Please see the
- JE MilliAmpMaster™ control switch section in this catalog for complete specifications.
- Available in standard cable lengths of 5, 10, or 20 ft (1.52, 3.05, or 6.10 m)
- Colored caps for easy identification (blue cap = normally open; red cap = normally closed)
- Two float mounting configurations are available; mounting clamp or cable weight
- EZconnex® SJE MegaMaster® Float switches: these are SJE MegaMaster® control switches that feature the quick release connection. Please see the SJE MegaMaster® control switch section in this catalog for complete specifications.
- Available in standard cable lengths of 10, 25, or 50 ft (3.05, 7.62 or 15.24 m)
- Optional 6-hook mounting bracket available (sold separately)
EZCONNEX® 4-PORT FLOAT SWITCH CONNECTION SYSTEM – Manifold/float connection
system designed for easy installation of 1-4 float switches in a wet well for
level control applications.
N = Narrow Angle W = Wide Angle PC = Pipe Clamp CW = Cable Weight NO = Normally Open NC = Normally Closed EZ = EZconnex® NOTE: One sealing plug must be ordered for each unused port. Do not install a manifold with open port(s).
SPECIFICATIONS
- MANIFOLD SPECIFICATIONS
- CABLE: direct burial shielded PVC Type TC-ER TFFN (UL) 600V 18 gauge, 8 conductor
- HOUSING: ABS plastic
- ELECTRICAL: 125 VAC
- Maximum Electrical Load: 1 amp per connection port
FLOAT SPECIFICATIONS
-
EZconnex® SJE MilliAmpMaster™ Float switches: these are SJE MilliAmpMaster™ control switches that feature the quick release connection. Please see the SJE MilliAmpMaster™ control switch section in this catalog for complete specifications.
-
EZconnex® SJE MegaMaster® Float switches: these are SJE MegaMaster® control switches that feature the quick release connection. Please see the SJE MegaMaster™ control switch section in this catalog for complete specifications.
MOUNTING BRACKET SPECIFICATIONS -
BRACKET: 304 stainless steel
OTHER INFORMATION
NORMALLY OPEN (HIGH-LEVEL) OPERATION
Blue colored cap, the control switch turns on (closes) when the switch tips
above horizontal signaling a high level and turn off (opens) when the switch
drops below horizontal.
NORMALLY CLOSED (LOW-LEVEL) OPERATION
Red colored cap, the control switch turns on (closes) when the switch drops
below horizontal signaling a low level and turns off (opens) when the switch
tips above horizontal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>