DALLUX NCC71AFG Wireless Reversing Camera Instruction Manual

: June 14, 2024
: DALLUX

Table of Contents

DALLUX NCC71AFG Wireless Reversing Camera
Product Information
Description
General
Operation Instruction
Key function description
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DALLUX NCC71AFG Wireless Reversing Camera

Product Information

The NCC71AFG is a 720P digital audio video receiver with 4T1R. It is designed for wireless car rear vision and wireless monitoring applications. The receiver integrates MPEG4 codec, FHSS base band, RF transceiver, AD&Flash, and CCIR656 Sensor. It supports CVBS PAL/NTSC System input.

DC Characteristics:

Power Supply: +9~+30V
Current Consumption: TYPE: 300mA, Max.380mA
Operating Temperature: 2S Max. 120mS Max.
Resolution: VGA640X480/D1720X480
Frame Rate: VGA: 30f/s/D1: 25f/s
Video Codec: AVI PAL/NTSC
Voice Sample Rate: 16KHz/12BIT ADC
Voice Frequency Band: 20Hz~20KHz
ID/BIT SYSTEM Architecture: Pairing/22(4KK) RISC(32Bit) SOC

RF SPEC:

RF Operation Frequency: 2400 ~ 2483.5MHz*
RF Impedance: 50, Typ. 2:1
Voltage Standing Wave Ratio: 20dBm with Power control
RF Bit Rate: 4Mbps FSK/GFSK FHSS

Operating Instruction:

Code-matching operation: After power on, press the menu key to enter the main menu and select the code-matching. Enter code matching mode and count down the code in 20 seconds. At the same time, the transmitting side is in the strong state of the code to match the code.
Image setting: Adjustable in the image menu, brightness, contrast, chroma, volume adjustment.
Mirror settings: The mirror menu controls the image up, down, left, and right flip functions.
Mode setting: Camera settings: Under this menu, you can select the switch status, cycle time, and set automatic cycle of the four cameras.
System setting: In the system setting menu, you can adjust the date and time, language, N system/P system, trigger the time, reverse cursor function.
Play function: Select play function to enter play interface, play SD card content, press menu key to exit.
Video setting: Enter the video setting interface, you can format SD card and loop recording function.

Note: The first use of the new card must be formatted in this machine before it can be used normally.

Key Functions:

Power switch
Upturn
Flip down switch
Menu determine

Description

NCC71AFG is a 720P digital audio video receiver with 4T1R, the main application is wireless car rear vision, wireless monitoring, which integrates MPEG4 codec , FHSS base band , RF transceiver ,AD&Flash, and CCIR656 Sensor,Support CVBS PAL/NTSC System input.

General

DC Characteristics

Power Supply| +9~+30V
Current Consumption| TYPE:300mA, Max.380mA
Environmental Specification
Operating Temperature| -10~+60 ºC
Storing Temperature| -30~+85 ºC
Operating humidity| 85%RH
BASEBANGD SPEC.
POWER ON| 2S Max.
Latency| 120mS Max.
Resolution| VGA：640X480/D1：720X480
Frame Rate| VGA:30f/s/D1: 25f/s
Video Codec| AVI
Video in System| PAL/NTSC
Voice Sample Rate| 16KHz/12BIT ADC ADPCM/PCM
Voice Frequecny Band| 20Hz~20KHz
ID/ BIT| （Pairing）/22(4KK)
SYSTEM Architecture| RISC(32Bit) SOC
RF SPEC.
RF| ＭＲ7916
Operation Frequency| 2400 ~ 2483.5MHz*
RF Impedance| 50Ω, Typ.
Voltage Standing Wave Ratio| 2:1
Output Power| 20dBm with Power control
RF Bit Rate| 4Mbps
Modulation| FSK/GFSK
Spread Spectrum| FHSS
Overlapping Hopping Channel| 125
Hopping Rate| 1200/S
CRCCheck Bit| 16
---|---
Line of Sight Range| >200M
Receiving Sensitivity| –88dBm@4MHZ
RSSI Level| 4
Video Characteristics
Video Output impedance| 75Ω, Typ.
Video Output Level| 1Vp-p, Typ.
Video Polarity| Negative polarity
Video Frequency Respone| ±5 dB, Max. 50Hz ~ 6MHz
Audio
Audio Output impedance| 200KΩ, Typ.
Audio Output Level| 5mv~0.2Vp-p, Typ.
S/N(340Hz ~ 3.4kHz| 63dB, Min
(THD):(340Hz~ 3.4kHz,0.5p-p)| 5 %, Max
Otline
Size）| 100(L)X60(W)X1.2(H)
Weight|

Multi-language: English, Japanese, Russian, Spanish, Italian, German, French.

Operation Instruction

Code-matching operation: after power on, press the menu key to enter the main menu and select the code-matching.
Enter code matching mode and count down the code in 20 seconds. At the same time, the transmitting side is in the strong state of the code to match the code.
Image setting: Adjustable in the image menu, brightness, contrast, chroma, volume adjustment.
Mirror settings: The mirror menu controls the image up, down, left, and right flip functions.
Mode setting
Camera settings: under this menu, you can select the switch status, cycle time, and set automatic cycle of the four cameras.
System setting: In the system setting menu, you can adjust the date and time, language, N system/P system, trigger the time, reverse cursor function.
Play function: select play function to enter play interface, play SD card content, press menu key to exit.
Video setting: Enter the video setting interface, you can format SD card and loop recording function. Note: The first use of the new card must be formatted in this machine before it can be used normally.