Zenox Rookie MK2 Gaming Chair User Guide
- June 17, 2024
- Zenox
Table of Contents
Zenox Rookie MK2 Gaming Chair User Guide
SUPPORT
Contact us via email at aftersales@zenoxstore.com, or WhatsApp™ at +852 8481 7841.
HEAVY
The product is considerably heavy, grab a friend and do the installtion together if possible.
CAUTION
Stop using the product with damaged parts.
Sit in the center of the chair, back against the backrest.
Do Not Sit at the edge of the chair, as it will tilt the balance.
Do Not Stand on the chair, and use it as any form of stool or ladder.
Be Careful when using the recliner and other moving parts of chair.
Avoid Direct Sunlight as it would cause fading and damage the upholstery.
Avoid Strong Chemicals or scrubbing excessively, as it would cause fading and damage the upholstery.
Assemble Videos www.zenoxstore.com/pages
/assembly-guides
www.zenoxstore.com (+852) 65634820
sales@zenoxstore.com
Congratulations
Let’s get started.
Package Content
A – 1 Set of Pillows (2pcs)
B – 1 Backrest
C – 1 Seat assembly with armrests
D – 1 Class-4 gaslift with covers
E – 1 Wheelbase
F – 1 Set of casters (5pcs)
G – 1 Tilt mechanism
H – 1 Set of backrest side covers (2pcs)
I – 1 Hex key
*Bolts are pre-installed, remove and reuse.
Step 01
Put together the base.
Step 02
Side and align the backrest and seat
Step 03
Remove the bolts and install the mechanistic.
Step 04
Clip on the backrest side covers.
WARNING
MAGNET INSIDE
Step 05
Put togther the seat base and pillows.
Complet
Assemble Videos
www.zenoxstore.com/pages/assembly-guides
www.zenoxstore.com(+852) 65634820
sales@zenoxstore.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>