EZCONNEX 1053987 Float Switch Manifold Owner’s Manual
- August 14, 2024
- EZCONNEX
Table of Contents
EZCONNEX 1053987 Float Switch Manifold
Specifications
-
MANIFOLD SPECIFICATIONS
-
CABLE: Direct burial shielded PVC Type TC-ER TFFN (UL) 600V 18 gauge, 8 conductor
HOUSING: ABS plastic -
ELECTRICAL: 125 VAC
-
Maximum Electrical Load: 1 amp per connection port
-
-
FLOAT SPECIFICATIONS
-
MOUNTING BRACKET SPECIFICATIONS
- BRACKET: 304 stainless steel
Product Usage Instructions
- Installation: Ensure the manifold is not installed with open ports. Connect the color-coded wire pairs to the corresponding colored caps on the manifold housing for easy identification. Use the mounting bracket to securely install the float switches in the desired location.
- Maintenance: In case of maintenance or replacement of floats, utilize the quick release float switch connections for easy access and replacement.
- Operation: Understand the normally open (high level) and normally closed (low level) operations based on the colored caps to control switch behavior.
FAQ
Q: What is the maximum electrical load supported per connection port?
A: The maximum electrical load supported per connection port is 1 amp.
Q: How should I handle maintenance or replacement of floats?
A: Utilize the quick release float switch connections and mounting bracket for
easy maintenance and replacement of floats.
EZCONNEX® 4-PORT FLOAT CONNECTION SYSTEM
Designed for Easy Installation of Float Switches in Wet Well Applications
- The EZconnex® float switch connection system is a revolutionary new way to install float switches in a wet well for level control applications. It includes an electrical wiring manifold with four quick-release float switch connection ports, mounting bracket and hardware. Installation is as easy as 1, 2, 3…Simply install the manifold, plug in the quick connect floats, and wire the manifold cable to the control panel.
- A single 8 conductor direct burial cable has Red-Blue-Yellow-White wire pairs that match the R-B-Y-W colored caps on the manifold housing for easy identification and field wiring. The color-coded cable makes for a quick, easy installation. The quick release float switch connections and mounting bracket allow for easy maintenance and replacement of floats.
- The EZconnex® system can be used with 1, 2, 3 or 4 float switches. Each float switch includes a protective rubber boot that provides a dual seal design for an extra layer of protection to keep connections clean and dry. A range of wide-angle and narrow-angle float switch options are available with quick release connections to suit application needs (sold separately). Sealing plugs are available for unused manifold ports (sold separately).
NOTE: Do not install manifold with open port(s).
FEATURES
- (4) Quick release float connection ports for easy maintenance in the wet well
- A single 8-conductor direct burial cable with colored wire pairs for easy and clean field wiring of the control panel
- Manifold housing includes Red-Blue-Yellow-White colored caps that match Red-Blue-Yellow-White wire pairs in manifold cable for easy identification and field wiring
- Can be used with 1-4 float switches; sealing plug(s) available for unused manifold port(s)
- Rated for short-term water submersion in water
- Includes mounting bracket; float switches and sealing plugs must be ordered separately
OPTIONS
Manifold Options
- Standard cable lengths of 25, 50, or 100 ft (7.62, 15.24, or 30.48 m)
- Sealing plug (includes rubber boot) required for unused port(s)
Float Switch Options
- EZconnex® SJE MilliAmpMaster™ Float switches: these are SJE MilliAmpMaster™ control switches that feature the quick release connection. Please see the= SJE MilliAmpMaster™ control switch section in this catalog for complete specifications.
- Available in standard cable lengths of 5, 10, or 20 ft (1.52, 3.05, or 6.10 m)
- Colored caps for easy identification (blue cap = normally open; red cap = normally closed)
- Two float mounting configurations available; mounting clamp or cable weight
- EZconnex® SJE MegaMaster® Float switches: these are SJE MegaMaster® control switches that feature the quick release connection. Please see the SJE MegaMaster® control switch section in this catalog for complete specifications.
- Available in standard cable lengths of 10, 25, or 50 ft (3.05, 7.62 or 15.24 m)
- Optional 6-hook mounting bracket available (sold separately)
EZCONNEX® 4-PORT FLOAT SWITCH CONNECTION SYSTEM – Manifold/float connection system designed for easy installation of 1-4 float switches in a wet well for level control applications.
Part #| Description (4-Port Manifold)| Shipping
Weight| List Price
---|---|---|---
1053987| EZconnex®, 4-Port, 25 ft., with Mounting Bracket| 4.57 lbs.|
$273.96
1053988| EZconnex®, 4-Port, 50 ft., with Mounting Bracket| 7.04 lbs.|
$337.38
1053989| EZconnex ® , 4-Port, 100 ft., with Mounting Bracket| 11.98
lbs.| $464.22
| EZ CONNEX ® FLOAT SWITCH NARROW-ANGLED
VERSIONS|
| NORMALLY OPEN
NORMALLY CLOSED
Part #| Description Part #
Description| Shipping Weight| List Price
1046922| 5MAPNPCNOEZ| 1046923| 5MAPNPCNCEZ| 0.86 lbs.| $60.62
1046924| 10MAPNPCNOEZ| 1046925| 10MAPNPCNCEZ| 1.14 lbs.| $65.06
1050721| 20MAPNPCNOEZ| 1050840| 20MAPNPCNCEZ| 1.79 lbs.| $74.20
1054141| 5MAPNCWNOEZ| 1054142| 5MAPNCWNCEZ| 2.16 lbs.| $72.93
1054145| 10MAPNCWNOEZ| 1054146| 10MAPNCWNCEZ| 2.44 lbs.| $77.37
1054150| 20MAPNCWNOEZ| 1054151| 20MAPNCWNCEZ| 3.09 lbs.| $86.51
| EZ CONNEX ® FLOAT SWITCH WIDE-ANGLED
VERSIONS|
| NORMALLY OPEN
NORMALLY CLOSED
Part #| Description Part #
Description| Shipping Weight| List Price
1046918| 5MAPWPCNOEZ| 1046919| 5MAPWPCNCEZ| 0.86 lbs.| $60.62
1046920| 10MAPWPCNOEZ| 1046921| 10MAPWPCNCEZ| 1.14 lbs.| $65.06
1050841| 20MAPWPCNOEZ| 1050842| 20MAPWPCNCEZ| 1.79 lbs.| $74.20
1054143| 5MAPWCWNOEZ| 1054144| 5MAPWCWNCEZ| 2.16 lbs.| $72.93
1054147| 10MAPWCWNOEZ| 1054148| 10MAPWCWNCEZ| 2.44 lbs.| $77.37
1054152| 20MAPWCWNOEZ| 1054153| 20MAPWCWNCEZ| 3.09 lbs.| $86.51
| EZ CONNEX ® MEGAMASTER ® FLOAT SWITCH|
| NORMALLY OPEN
NORMALLY CLOSED
Part #| Description Part #
Description| Shipping Weight| List Price
1059056| 10MEGANOEZ| 1059057| 10MEGANCEZ| 2.6 lbs.| $97.98
1059058| 25MEGANOEZ| 1059059| 25MEGANCEZ| 3.6 lbs.| $112.88
1059060| 50MEGANOEZ| 1059061| 50MEGANCEZ| 5.1 lbs.| $136.99
Options Part #| Description| Shipping Weight|
List Price
1047611| Sealing Plug (includes Rubber Boot)| 0.16 lbs.| $13.95
1052814| 6 Hook Bracket| 2.0 lbs.| $92.37
N = Narrow Angle W = Wide Angle PC = Pipe Clamp CW = Cable Weight NO =
Normally Open NC = Normally Closed EZ = EZconnex®
NOTE: One sealing plug must be ordered for each unused port. Do not install
manifold with open port(s).
SPECIFICATIONS
MANIFOLD SPECIFICATIONS
- CABLE: direct burial shielded PVC Type TC-ER TFFN (UL) 600V 18 gauge, 8 conductor
- HOUSING: ABS plastic
- ELECTRICAL: 125 VAC Maximum Electrical Load: 1 amp per connection port
FLOAT SPECIFICATIONS
- EZconnex® SJE MilliAmpMaster™ Float switches: these are SJE MilliAmpMaster™ control switches that feature the quick release connection. Please see the SJE MilliAmpMaster™ control switch section in this catalog for complete specifications.
- EZconnex® SJE MegaMaster® Float switches: these are SJE MegaMaster® control switches that feature the quick release connection. Please see the SJE MegaMaster™ control switch section in this catalog for complete specifications.
OTHER INFORMATION
NORMALLY OPEN (HIGH LEVEL) OPERATION
Blue colored cap, the control switch turns on (closes) when the switch tips
above horizontal signaling a high level, and turns off (opens) when the switch
drops below horizontal.
NORMALLY CLOSED (LOW LEVEL) OPERATION
Red colored cap, the control switch turns on (closes) when the switch drops
below horizontal signaling a low level, and turns off (opens) when the switch
tips above horizontal.
www.sjerhombus.com • email: customer.service@sjeinc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>