EPSON L1075U Pro 3LCD Laser Projector Instruction Manual

: June 17, 2024
: Epson

Table of Contents

Descriptions
Turning the Projector On
Changing the Language of the Projector Menus
Switching Between Image Sources
Selecting the Lens Type
Changing Screen Type
Adjusting Image Position
Zooming and Focusing
Correcting Image Shape
Making Other Image Adjustments
Turning the Projector Off
Troubleshooting
Where to Get Help
Remote Control Map
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EPSON L1075U Pro 3LCD Laser Projector

This Quick Reference card gives brief instructions on connecting your projector and using common features. For details, see the online User’s Guide.

IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.

Descriptions

Turning the Projector On

Turn on your computer or image source.
Remove the lens cover.
Press the On button on the projector or the remote control.
After the status light stays blue, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.
If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.”

Changing the Language of the Projector Menus

The default language of the projector’s menu system is English, but you can change it as necessary.

Press the Menu button to access the projector’s menu system.
Select Extended > Language.
Select your language.
When you’re done, press the Menu button to exit.

Switching Between Image Sources

Press the Search button or one of the source buttons (remote control), or the Source Search button (projector).

Selecting the Lens Type

Make sure the Lens Type setting is correct for the lens you are using.

Press the Menu button.
Select Extended > Operation > Advanced > Lens Type.
Note: If the Lens Type setting is greyed out, the projector has automatically detected the installed lens and you can skip the remaining steps.
Select the lens you are using.
When you’re done, press the Menu button to exit.

Changing Screen Type

Set the Screen Type setting to the screen’s aspect ratio.

Press the Menu button.
Select Extended > Display > Screen > Screen Type.
Select the screen’s aspect ratio.
Note: The displayed image should match the screen’s size and shape.
When you’re done, press the Menu button to exit.
Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.

Adjusting Image Position

Press the Lens Shift button (remote control) or the Lens button (projector).
Press the arrow buttons to adjust the position of the projected image.
When you’re done, press the Esc button to finish the adjustment.

If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.

Zooming and Focusing

On the remote control, press the Zoom or Focus button.

On the projector, press the Lens button repeatedly until the focus or zoom adjustment screen is shown.

Press the or arrow buttons to make the adjustment.
Press the Esc button to finish the adjustment.

Correcting Image Shape

If your image is uneven on the sides, you can use the projector’s distortion correction features, such as H/V-Keystone and Quick Corner®, to adjust the shape. See the online User’s Guide.

Making Other Image Adjustments

For help on using the projector’s features to improve the image quality, see the online User’s Guide. You can also view information on how to adjust the image color, position, and edges (Edge Blending) when projecting from multiple projectors to create one seamless widescreen image.

Turning the Projector Off

Press the Standby button to turn the projector off. If you see a confirmation message, press the Standby button again.

Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide.

With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.

Troubleshooting

If you see a blank screen or the message No signal

Make sure the status light on the projector is blue and not flashing, and the lens cover is removed.
Make sure the cables are connected correctly. See the online User’s Guide.
You may need to change the image source. See “Switching Between Image Sources.” Also make sure the source device is turned on.

If the projector and the notebook don’t display the same image

Windows®
Press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. You may need to press the keys again to display the image on both devices.

On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.

Mac
Open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

Where to Get Help

Manuals
For more information about using the projector, you can view or download the online manuals from the Epson website, as described below.

Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

Speak to a support representative
To use the Epson® PrivateLine® Support service, call 800-637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing 562-276-4394 (U.S.) or 905-709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday and 7 am to 4 pm, Pacific Time, Saturday.

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Purchase supplies and accessories
You can purchase an air filter (V13H134A46), screens, and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO- EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).

Remote Control Map

EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PrivateLine is a registered trademark of Epson America, Inc.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.

This information is subject to change without notice.