ezviz Mini Pano 3MP Fisheye IP Camera User Guide
- June 17, 2024
- ezviz
Table of Contents
ezviz Mini Pano 3MP Fisheye IP Camera
Setup
Step1: Power on
Use power adapter to power up the camera.
Step 2: Camera Setup
-
Create an user account.
- Connect your mobile device to Wi-Fi.
- Search “EZVIZ” in App Store or Google PlayTM to download.
- Launch the App and register an EZVIZ user account.
-
Add Mini Pano to EZVIZ.
- Log in the EZVIZ App.
- At the Home screen, tap “+” on the upper-right corner to go to the scanning QR code interface.
- Scan the QR Code on the bottom of the camera or enter the SN Serial No. on the label.
- Tap “Add” and wait Mini Pano’s automatic linkage until LED indicator flashes in Blue.
-
Enable the Image Encryption.
After enabling it, your video and image can be encrypted in transmission. You can also change the default password.- Go to the camera settings.
- Tap “Change Password”.
- Tap “Edit”.
- Enter the original verification code located on the label of the camera.
- Enter new password (6 to 12 characters and numbers).
Mounting Procedure (Optional)
The camera can be mounted on the wall or ceiling.
- Make sure the wall/ceiling is strong enough to withstand three times the weight of the camera and the mounting.
- Camera should stay away from any reflective objects such as mirrors.
- Place drill template onto the surface you have chosen to mount the camera.
- (For cement wall/ceiling only) Drill screw holes according to the template and insert three expansion screws.
- Use three metal screws to fix the camera base according to the template.
- Fix the base cover on the base (OPEN right on the UP).
- Mount the camera to the base with the power interface near the power cable.
Appendix
Mini Pano Basics
Name Description
- MIC: For audio in.
- Speaker: For audio out.
- LED Indicator
- Flashing Red and Blue: Camera is ready for the Wi-Fi connection.
- Steady Blue: Video is being viewed or played back in EZVIZ App.
- Slowly Flashing Blue: Camera is running properly.
- Steady Red: Camera is starting up.
- Slowly Flashing Red: Wi-Fi connection has failed.
- Fastly Flashing Red: MicroSD card error.
- MicroSD Card Slot: MicroSD card not included in the Box Contents. Recommended compatibility: Class 10, Max.128GB. If a SD card is used, video files will be stored in the SD card.
- RESET: Press RESET for 10 seconds while the camera is running, the camera restarts and all parameters are reset to default.
- Power Input: 5V±5%
To connect to a different Wi-Fi network, press RESET for 10 seconds to restart the camera and then reconnect to Wi-Fi when indicator flashes in red and blue.
Box Contents
SD Card Management
Insert a MicroSD card into the slot before mounting.
- In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can store videos and/or pictures.
Troubleshooting
Q: “The device is offline.” or “The device is not registered.” prompts
appear when adding the camera using the EZVIZ App.
A :
- Make sure the network that the camera is connected to is working properly and the router’s DHCP is enabled.
- Press RESET for 10s to reset the settings if you change the network parameters.
Q: The mobile phone cannot receive alarm prompts when the camera is
online.
A :
- Make sure the EZVIZ App is running on your mobile phone.
- For Android OS mobile phone, make sure the App is running in the background; and for iOS mobile phones, enable the message push function in “Settings > Notification”.
Q: Does the camera support power via USB devices or a portable battery?
A: It’s advised to use the EZVIZ standard power adapter to provide the
stable voltage supply. For more information, please visit
www.ezvizlife.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>