GE APPLIANCES OPAL01GEPKT Opal Ice Maker Owner’s Manual

GE APPLIANCES OPAL01GEPKT Opal Ice Maker

Specifications

• Model : OPAL01GEPKT
• Manufacturer : General Electric (GE)
• Trademark: GE
• Product Dimensions : [insert dimensions]
• Weight : [insert weight]
• Power Source : [insert power source]

Product Usage Instructions

Safety Information

Before using the appliance, it is important to read and understand all instructions provided in this manual. Failure to do so may result in personal injury or damage to the product.

• Ensure the appliance is properly grounded by connecting the grounding prong from the power cord.
• Use a power cord with an appropriate electrical rating and ensure it is grounded according to the National Electric Code and local codes and ordinances.
• Avoid using the appliance outdoors unless specified in the installation instructions.
• Keep children and pets away from the ice maker to prevent injury.
• Avoid looking directly at the light emitted by the lamp as it can cause serious eye damage and burn unprotected skin.
• Avoid touching hot surfaces and do not use the appliance if the power cord is damaged.
• Do not insert any objects into the ice maker or attempt to disassemble any part of the product.
• Refer to the user manual for proper care and maintenance instructions.

Installation

Follow these steps to properly install the Opal Ice Maker

1. Choose a suitable location for the ice maker.
2. Ensure the ice maker is placed on a stable and level surface.
3. Connect the power cord to a grounded electrical outlet.
4. Refer to the installation instructions for any additional steps specific to your model.

Operation

To use the Opal Ice Maker, follow these steps:

1. Fill the water reservoir with clean water.
2. Close the water reservoir lid securely.
3. Press the power button to turn on the ice maker.
4. Select the desired ice cube size using the control panel.
5. Wait for the ice maker to produce ice cubes. The status indicators will show the progress.
6. Open the ice bin and collect the ice cubes as needed.

FAQ

• Q: Where can I find the model and serial numbers of my Opal Ice Maker?
  • A : The model and serial numbers are located on a label on the back of the unit. Please refer to the user manual for more details.
• Q: Can I use the Opal Ice Maker outdoors?
  • A : It is generally not recommended to use the ice maker outdoors unless specified in the installation instructions. Please refer to the user manual for specific guidelines.
• Q: How do I clean and maintain the Opal Ice Maker?
  • A : Refer to the user manual for detailed instructions on cleaning and maintenance procedures. Regular cleaning is important to ensure optimal performance and longevity of the ice maker.

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNING

To reduce the risk of fire, explosion, electric shock, exposure to UV radiation, or injury when using your Opal, follow these basic safety precautions.

• Do not, under any circumstances, alter or remove the third (ground) prong from the power cord. For personal safety, this product must be properly grounded.
• Do not exceed power outlet ratings. It is recommended that the ice maker is connected to its own circuit. Use only a 115 V, 60 Hz standard electrical supply that is properly grounded in accordance with the National Electric Code and local codes and ordinances.
• Due to potential safety hazards under certain conditions, we strongly advise against the use of an extension cord. However, if you must use an extension cord, it is absolutely necessary that it is a UL-listed, 3-wire ground-type appliance extension cord having a  grounding type plug and that the electrical rating of the cord is 15 Amperes (minimum) and 120 Volts.
• This product must be properly installed and located in accordance with the installation instructions before it is used. The product is for indoor household use only. Do not use outdoors.
• Do not store or use flammable vapors or liquids near this product.
• Do not allow children to climb, stand, or hang on the ice maker. They could seriously injure themselves.
• Do not look directly at the UV lamp when it is operating. The light emitted by the lamp will cause serious eye damage and burn unprotected skin.
• In order to avoid exposure to UV radiation, disconnect the power to the ice maker before removing the external covers.
• Do not use with water that is micro-biologically unsafe or of unknown quality.
• Place the power cord in such a way it cannot be pulled on by children or cause a tripping hazard.
• Place power cord in such a way that it is not in contact with hot surfaces.
• Do not operate if any component, including the cord or plug, is damaged.
• Unplug the product before cleaning by hand and when not in use.
• Do not immerse any part of the product in water.
• Do not plug or unplug product with wet hands.
• Do not attempt to disassemble, repair, modify, or replace any part of vour product.
• Use this product only for its intended purpose as described in this user manual.
• Do not use any accessories not recommended by the manufacturer.
• When handling, installing, and operating the appliance, care should be taken to avoid damage to the refrigerant tubing.
• Servicing shall be performed by factory-authorized service personnel and component parts shall be replaced with manufacturer-authorized replacement components.

CAUTION

To reduce the risk of injury when using your Opal, follow these basic safety precautions.

• Do not remove any safety, warning, or product information labels from your ice maker.
• Lifting Hazard : It is recommended to have two people labels from your ice maker. move and install the ice maker in order to prevent injury.

WARNING

FIRE OR EXPLOSION HAZARD Flammable Refrigerant

This appliance contains isobutane refrigerant, also known as R600a, a natural gas with high environmental compatibility. However, it is also combustible. Adhere to the warnings below to reduce the risk of injury or property damage.

1. When handling, installing, and operating the appliance, care should be taken to avoid damage to the refrigerant tubing.
2. Service shall only be performed by authorized service personnel. Use only manufacturer-authorized service parts.
3. Dispose of a refrigerator in accordance with Federal and Local Regulations. The flammable refrigerant and insulation material used in this product require special disposal procedures. Contact your local authorities for the environmentally safe disposal of your refrigerator.
4. Keep ventilation openings in the appliance enclosures or in the built-in structure clear of obstruction.
5. To remove frost, scrape with a plastic or wood spatula or scraper. Do not use an ice pick or a metal or sharp-edged instrument as it may puncture the freezer liner and then the flammable refrigerant tubing behind it.
6. Do not use electrical appliances inside the food storage compartment of the appliance.
7. Do not use any electrical device to defrost your appliance

READ AND SAVE THESE INSTRUCTIONS

Parts Included

Getting Started

Installation Requirements
CAUTION Lifting Hazard: It is recommended to have two people move and install the ice maker in order to prevent injury.

• The product is designed to be installed indoors. Do not use your ice maker outdoors.
• The product must be installed upright on a flat, level suitor that is able to support the total weight when
• Ensure a minimum of three inches (3) clearance around the side and back walls of the ice maker for proper air circulation.
• Install the product in a well-ventilated area with an ambient temperature between 55°F and 90°F.
• Do not place the product near heat sources such as ovens or cooktops.
• Do not place the product in direct sunlight.

Prepare Opal For Use

1. Carefully remove packing material. Do not use sharp tools that can damage the box contents.
2. Ensure all components are present. If any item is missing, please contact 1.866.907.6718.
3. Place the ice maker upright on a flat, level surface and plug it in.
4. Install drip tray by sliding it under the front edge of Opal. The tray slots should align with the front feet of Opal.
5. Rinses elore are ust Sat win step or cleaning instructions on page 6. It is not necessary to use bleach for the first rinse.

NOTICE: Some types of under-cabinet lamps can be hot enough to cause damage to your Opal top’s appearance.

Care and Cleaning

To keep your nuggets ice-tasting fresh and your Opal looking great, we recommend cleaning/sanitizing your Opal at least once per week.
To clean the exterior of the ice maker, unplug the product, then use a soft cloth dampened with soapy water to gently clean the exterior surfaces. Dry with a soft cloth.
The exterior stainless steel surfaces can be cleaned with commercially available stainless steel cleaner. Use
only a liquid cleaner free of grit and rub in the direction of the brush lines with a damp, soft sponge. Do not use appliance wax, polish, solvents, or chemicals on the stainless steel. Do not use soap to clean the reservoir.
Use a soft cloth moistened with water.

WARNING

Chemical Exposure Hazard, when cleaning with bleach, use bleach in a well ventilated area and avoid mixing bleach with other household cleaners.
WARNING

Unplug the product before cleaning by hand, and when not in use.

System Cleaning / Sanitizing Procedure

1. Unplug Opal.
2. Remove water filter (if present), and replace with the reservoir’s screened intake cap. See Figure 1.
3. Drain Opal (see page 8 for detailed instructions).
4. Plug in Opal and slide the rear switch to the “clean” position. See Figure 2.
5. The display ring will light up yellow and pulse. See Figure 3.
   • NOTE : Do not use soap to clean the water reservoir.
6. Create a solution of five cups of water and one tsp of household bleach. Skip to page 8 for further instructions on how to remove hard mineral deposits.
7. Pour the solution into the water reservoir. See Figure 4.
8. Touch the display button to start the cleaning process, the light will start to spin and you will hear water circulating. After three minutes the water will stop and the light will begin to pulse again.
9. When the light pulses, drain Opal.
10. Unhook the top of the drain hoses at the back of the unit. See Figure 5.
11. Then lay them down to drain into a sink or bucket that is below the level of the ice maker. See Figures 6 and 7.
12. Remove the plugs and allow the water to completely drain. See Figure 7.
13. Once the water stops flowing, re-insert the drain plugs.
14. Add five cups of fresh water to the water reservoir, and touch the button. The light ring is divided into four sections to indicate each stage. Successive quarters of the ring will become brighter with each rinse cycle.
15. Rinse three times with fresh water. Repeat steps 8 through 14 two more times, adding fresh water to the reservoir each time. (You may continue to repeat the rinse cycle, for as many times as you like.

Removal of Mineral Deposits

1. Fill the reservoir with vinegar to the max fill line and run up to three cleaning cycles. Or purchase an Opal Cleaning Kit and follow instructions inside.
2. If using vinegar, leave the vinegar in the unit for 18 hours and set a vinegar-soaked towel on the ice chute overnight to further dissolve any mineral buildup.
3. Clean the sensors with vinegar and wipe clean with water. After draining the vinegar, run three rinse cycles, using fresh water for each rinse…

Cleaning the Bin and Tray

To clean the ice bin, remove the ice bin from the ice maker and clean with a soft cloth dampened with soapy water.
Rinse thoroughly. Dry with a soft cloth. Do not use solvents or chemicals.
The drip tray should be wiped dry. Water left in this area may leave deposits. To clean the drip tray, remove the tray from Opal and use a soft cloth dampened with mild soapy water to gently clean the surface. Dry with a soft cloth. Do not use solvents or chemicals.

Understanding the display

Button
Touch once to turn Opal ON or OFF
Touch and hold for 3 seconds to dim the interior lighting if desired.
Display Ring
Displays the status of the Opal ice maker. See below for details.
Mode switch (located on the back)
Switch in “Ice” position places Opal in ice-making mode.
Switch in the “Cleaning” position places Opal in cleaning mode.

• Falling White : Opal is currently making ice.
• Solid white : The ice bin is full. Opal is no longer continuing to make ice.
• Switching blue : Opal needs more water
• Pulsing yellow : Opal is in cleaning mode, awaiting drain and refill confirmation
• Rotating yellow : Opal is rinsing (cleaning mode) Slowly falling white: Opal is defrosting.
• Slowly falling white : Opal is defrosting. Please do not unplug or turn off, this takes 30 minutes.

Making Ice with Opal

Once Opal has been cleaned/sanitized, move the ice maker to its desired location and complete the following steps.

1. Remove ice bin.
2. Fill the reservoir with potable (safe to drink) water up to the “Max Fill” line. Water hardness must be less than 12 grains per gallon. Do not fill the reservoir with any liquid except water. Using any liquid except potable water is misuse and will void your warranty.
3. Plug the ice maker into a grounded outlet.
4. Touch the display button to start the ice maker. The display will flash green to indicate the ice maker is ON, then transition to the falling white display.
5. Opal will begin to produce ice in 15-30 minutes. It will continue to make ice until the bin is full, or it runs out of water. To continue making ice, just add more water.

Draining Opal

We recommend draining your Opal when:

1. You put it away or anytime it’s being relocated
2. You turn it off for more than a few days. (i.e. vacation)
3. You are not using much ice. Continuous recirculation of meltwater may affect the taste. For best results, drain your Opal.

Water Filter

The Opal Water Filter, is available at Appliances and is the only water filter compatible with Opal. Please follow the installation instructions included with your filter. Opal.
NOTE : Remove your water filter (if installed) and reinstall the screened intake cap prior to cleaning your

Side Tank Accessory

Side Tank Quick Start

NOTE : There are two drain tubes located on the back of your Opal Nugget Ice Maker indicated as drain tubes A and B in the illustration.

1. Hand Wash Only: Rinse and hand wash Opal Side Tank with warm water and a bar of mild dish soap. Remove the Opal Side Tank’s cap and wash the cap and rubber valve with water and a mild dish soap. The Side Tank base can be washed by disconnecting the hose and adding a small amount of soapy water to it. Scrub as needed and rinse thoroughly. The rinse water should drain out the port in the back.
   Rinse the cap, rubber valve, tank, and the base well to remove any residual soap (see illustration).

   • DO NOT WASH THE SIDE TANK IN THE
     DISHWASHER.

2. Unplug the Opal Nugget Ice Maker. Unhook Opal’s drain tubes and drain the water from the reservoir.

3. Connect the drain tube, labeled B, to the back of the Opal Side Tank’s base.

4. Make sure drain tube (A) is connected to the black hanger and installed on the back of Opal.

5. Make sure drain tube (B) connecting to the Side Tank is resting flat on the countertop.

6. Side Tank Accessory

7. Pour pal Side an and in install a either sauce of your that get can: magnets attached to the ice maker.
   NOTE : Care should be taken to connect the correct drain tube to the Opal Side Tank. Drain tube (B) should always be connected to the Side Tank whether it is installed on the left or right side of the Opal Nugget Ice Maker.

8. Remove the Opal Side Tank’s clear reservoir from its base.

9. Unscrew the Opal Side Tank’s cap from the reservoir. Fill the clear reservoir with water.

10. Replace the Opal Side Tank’s cap. Ensure the cap is clean when installing.

11. Carefully flip over the Opal Side Tank’s reservoir and place in the base. Water should start flowing into the Opal
    Nugget Ice Maker and bubbles in the Opal Side Tank will appear periodically during the time water is flowing to the ice maker.

    • NOTE : If water does not appear to flow into the ice maker, please check for the following:
    • There may be bubbles in drain tube (B) connecting the Side Tank to the Opal.
    • Tube (B) is not lying flat.
      If either of the above issues are present, adjust tube (B) to allow the water to flow.

12. Fill Opal Nugget Ice Maker’s reservoir.

13. Plug in Opal Nugget Ice Maker, and begin making ice.

Side Tank Accessory

WARNING : To reduce the risk of electrical shock or injury when using your Opal, follow these basic safety precautions:

• Unplug the product before cleaning by hand and when
• Make sure that Opal Nugget Ice Maker is unplugged and not in use. when draining the reservoir and installing the Opal Side Tank.
• Do not use with microbiologically unsafe water or
• Ensure that the Opal Side Tank is installed on a level of unknown quality. surface that will be stable even when the Opal Side Tank is
• Use caution when filling and installing the Opal Side Tank, full. as filled units may be heavy.
• Make sure the cap of the Side Tank remains clean
• Do not use this side tank for any liquid other than water. during filling and operation. Hands should be washed and cleaned prior to opening and closing the cap.
• Children should not fill or install the Opal Side Tank, as the filled unit may be heavy.

Use and Care

Cleaning the Side Tank

• Remove and drain the Side Tank.
• If there is residual water in the Opal Side Tank base unit, flip the Opal Side Tank’s base to drain.
• Remove and wash the Opal Side Tank’s cap and valve with dish soap and warm water as needed. Ensure the caps clean after removing and re-installing by hand.
• Only remove drain tubes while near a sink or bucket, as removing drain tubes from Opal or Opal Side Tank will drain any water in either unit.

Proper Installation and Location

The side tank should be installed flush to the front of the Opal Nugget Ice maker so that it does not block the airflow vents on the Opal Nugget Ice maker. Opal SideTank needs to sit on the same level surface as your OpalNugget Ice Maker. Do not elevate Opal Side Tank, or your Opal may overflow.

To Remove Mineral Deposits:

Mix two quarts of water with two quarts of vinegar, OR use the Opal Cleaning Kit. Clean any visible mineral buildup or deposits with this solution. If deposits are present in the tank, fill the tank with this solution and let soak. Be sure to drain and rinse  the tank thoroughly after cleaning. Stubborn deposits may require more than one treatment.

Side Tank Troubleshooting

If water does not flow from the Side Tank to the Opal Ice Maker:
There may be bubbles in the tube connecting the side  tank to the opal or it is not lying flat. Try adjusting the tube to allow the water to flow. Once water starts flowing ittypically will not need further adjusting.

Normal Operating Sounds

Your new ice maker may make sounds that are not familiar. Most of these sounds are normal. Hard surfaces like the floor, walls, and countertops can amplify these sounds. The following describes the sounds that may be new to youand what may be creating them.

• WHIR – When Opal is first turned on, you may notice the condenser fan spinning.
• BUZZ – When the water pump first turns on, it may be dry and slightly noisy. Once it is filled with water, the noise reduces significantly.
• RATTLE – Rattling noises may be produced from the flow of the refrigerant. These noises should reduce significantly once the refrigerant system has stabilized.
• GURGLE – When the refrigerant system shuts off, there may be a brief gurgle as the refrigerant stops flowing.
• HUM – The compressor is a motor. It produces a low toned humming sound while it is running.
• CLICK – As nugget ice is produced, it drops into the ice drawer. The first nuggets produced are the loudest, as  they impact the bottom of the ice bin. As the bin fills,this noise reduces significantly.
• SQUEAK – When Opal is in need of defrosting, it may start to squeak as ice starts to build up around the mechanisms. The defost cycle is automatic, and may take 30-45 minutes. During this time, the front button won’t respond.

Radio Frequency Interference

This product has been tested and found to comply with the limits set forth in Title 47 CFR Part 15 – Radio Frequency Devices. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product generates, uses, and can radiate radio frequency energy, and if not used in accordance with the instructions, may cause harmful interference to radio communications. If this product does cause harmful interference to radio or television reception, which can be determined by unplugging Opal,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the TV or radio antennas.
• Increase the distance between the product and TV or radio.
• Plug Opal into a separate outlet from a radio or TV. The transmitter must not be co-located or operating in conjunction with other antennas or transmitters.

Ice Maker Product Specifications

• NOTE : Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on your ice maker for the most accurate information
• The actual quantity of ice produced will vary with environmental conditions.

Note: Products containing refrigerants

This product contains a refrigerant, which under Federal Law must be removed prior to product disposal. If you are disposing this, or any refrigeration product, check with your local waste company for guidance.

WARNING
In order to avoid exposure to UV radiation, disconnect the power to the ice maker before removing the external covers.

Do not Attempt to repair or replace the UV lamp

GE Appliances Ice Maker Limited Warranty

GEAppliances.com
Please have your serial number and your model number available when calling for service. Call 1.866.907.6718 for service questions

What GE Appliances Will Not Cover:

• Service trips to your home.
• Improper installation, delivery or maintenance.
• Failure of the product if it is abused, misused, or used for other than the intended purpose or used commercially.
• Replacement of house fuses or resetting of circuit breakers.
• Damage caused after delivery.
• Replacement of the light bulbs, if included.
• Damage to the product caused by accident, fire, floods or acts of God.
• Incidental or consequential damage caused by possible defects with this appliance.
• Software bugs that can be corrected with an update via the Opal App
• Labor and other charges to install and/or remove the product

EXCLUSION OF IMPLIED WARRANTIES

Your sole and exclusive remedies are product exchange or refund as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

For sale in the 50 United States and the District of Columbia only: For US Customers:  This limited warranty is extended to the original purchaser for products purchased for home use within the USA. In Alaska and Hawaii, the limited warranty does not include the costs of shipping units.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: GE Appliances, a Hair company in Louisville, KY 40225

Consumer Support

Service and Registration
Register your new appliance online at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. Register your appliance at GEAppliances.com/register or visit myopalservice.com to submit a service request.

Contact Us

• If you are not satisfied with the service you receive from GE Appliances, contact us on our Website with all the details including your phone number, or write to:
• In the US : General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville, KY 40225 
• GEAppliances.com/contact
• In Canada : Director, Consumer Relations, Mabe Canada Inc. | Suite 310, 1 Factory Lane | Moncton, N.B. E1C 9M3 
• GEAppliances.ca/en/contact-us

References

• Contact Us or Get Help with Questions | GE Appliances
• GEAppliances.com/register
• GE Appliance Product Return or Exchange of a Small Appliance | GE Appliances
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>