Veroval medi.connect Desktop Software Installation Guide
- June 3, 2024
- Veroval
Table of Contents
medi.connect Desktop Software
Installation Guide
Medi.connect Desktop Software
Software Installation Guide
Veroval® ECG and Blood Pressure Monitor 2 in 1 combined device
Ea
data administration and store
Data transfer for Veroval° ECG and Blood Pressure Monitor 2 in 1 combined
device.
For tracking your values, start by setting-up the date and time on the device
before using it.
-
Select ECG in the software.
-
Plug in the USB Bluetooth Adapter into your PC & wait until it lights up GREEN.
-
Turn on the ECG device by clicking this button.
-
Go back to your PC and click on “Data Transfer” then select the ECG device to link it to the software.
-
When the Bluetooth icon shows on the screen, the connection is now established.
-
When the Bluetooth adapter lights up RED and the connection indicator starts blinking on the device, the data transfer has started.
-
After transmission, select the values you want to store, then click Save.
-
The stored values are now saved and displayed as
that
you can download as PDF, print, or email to your doctor.
Keep Track of your values using Verovar MediConnect
*SOFTWARE DOWNLOAD AND INSTALLATION**
- Visit www.veroval.info/en/mediconnect Click on Download Veroyal” medi.connect desktop software and install.
- Once installation is complete, an icon will show on your computer’s desktop.
ACCESS AND REGISTRATION
-
Double click on the Veroval” medi.connect software which will take you to the homepage.
-
Go to Settings then My profile and fill in your information: Gender, Age, Height. On the same page, fill in your desired password, then click Save.
-
Click on Register on Verovar medi.connect with your email and password to be able to synchronize your values and access from any browser.
-
In Settings, select your device: Blood Pressure, ECG, Weight, then select memory “1. Device user memory” then click Save.
-
You can now start data transfer.
-
For adding a person on Memory 2, go to My profile then click on “New”.
-
After adding a new profile, repeat Step 2 and select your device as memory “2. Device user memory” then click Save.