GIGABYTE Q2550 Laptop User Manual

GIGABYTE Q2550 Laptop

Product Information

Specifications

• Model: GIGABYTE Notebook
• Manufacturer: GIGABYTE
• Website: www.gigabyte.com

Product Usage Instructions

Setting up the Notebook
To set up your GIGABYTE Notebook for the first time, follow these steps:

Installing the Battery

1. Insert the battery pack into the compartment.
2. Slide the switch to the Lock position.

Connecting the Power

1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the DC-in jack on the right side of the notebook.
3. Connect the power cord to the power outlet.

Switching on the Power
To switch on the power of your GIGABYTE Notebook:

1. Press the power button located on the top view of the notebook.

GIGABYTE Notebook Tour
Your GIGABYTE Notebook features various components. Here is a tour of its different views:

Top View

• Webcam on/off Indicator
• Webcam
• Built-In Mic
• LCD
• Power Button
• Keyboard
• Touchpad and buttons
• LED Indicators
• Flash Memory Card Reader

Left View

• Power DC input
• LAN RJ 45
• D-Sub
• HDMI
• USB 2.0
• USB 3.0

Right View

• Microphone input Jack
• Headphone output Jack
• USB Ports(2.0)
• Optical Drive
• Kensington Lock Slot

Bottom View

• Battery
• Vent
• Speaker

Hotkeys
The GIGABYTE Notebook employs hotkeys or key combinations to access various controls. Here are some of the hotkey combinations:

Smart USB Backup Guide (Original: Recovery Image USB)
WARNING: Before proceeding with the Smart USB Backup, make sure to backup all your data as it will be eliminated during the creation of the recovery USB disk.

To backup the original recovery image to a USB disk, follow these steps:

1. Ensure the USB disk has a capacity of at least 20GB.
2. Connect the USB drive and run the Smart USB Backup application. For none-ODD models, use a USB ODD device or download the application from the GIGABYTE website (www.gigabyte.com).
3. Follow the on-screen instructions to create the recovery USB disk.

FAQ

Q: Where can I find more detailed information about my GIGABYTE Notebook?
A: You can visit the GIGABYTE website at www.gigabyte.com for more detailed information.

• Congratulations on your purchase of the GIGABYTE Notebook.
• This manual will help you to get started with setting up your notebook. The final product configuration depends on the model at the point of your purchase. GIGABYTE reserves the right to amend without prior notice. For more detailed information, please visit our website at www.gigabyte.com .

Using GIGABYTE Notebook for the First Time

To install the battery please follow these steps:

1. Insert the battery pack into the compartment.
2. Remember to slide the switch to the “Lock” position.

1. Connect the the power cord to the AC adapter.
2. Connect the AC adapter to the DC-in jack on the right side of the notebook.
3. Connect the power cord to the power outlet.

• Switching on the Power
  After you turn on the Q2550 for the very first time, do not turn it off until the operating system has been configured. Please note that the volume for the audio will not function until Windows® Setup has completed.

• Booting Up the Q2550 for the First Time
  Depending on your configuration, the Microsoft® Windows® Boot Screen will be the first screen that you will see as the notebook starts up. Follow the on- screen prompts and instructions and enter your personal information to complete the setup of the Windows® Operating System.

Your GIGABYTE Notebook Tour

Top View

1. Webcam on/off Indicator
2. Webcam
3. Built-In Mic
4. LCD
5. Power Button
6. Keyboard
7. Touchpad and buttons
8. LED Indicators
9. Flash Memory Card Reader
   • power on/Suspend Status
   • Battery Status LED
   • Airplane Mode Status
   • HDD Status LEDLED

Left View

1. Power DC input
2. LAN RJ 45
3. D-Sub
4. HDMI
5. USB 2.0
6. USB 3.0

Right View

1. Microphone input Jack
2. Headphone output Jack
3. USB Ports(2.0)
4. Optical Drive
5. Kensington Lock Slot

Bottom View

1. Battery
2. vent
3. speaker

Hotkeys

The computer employs hotkeys or key combinations to access most of the computer’s controls like screen brightness and volume output. To activate hotkeys, press and hold the key before pressing the other key in the hotkey combination.

Smart USB Backup Guide (Original: Recovery Image USB)

WARNING

• You can backup original recovery image through this application in case of losing by device damage.
• You can backup original recovery image to USB disk and restore the system if any storage system replacement with the recovery USB disk.
• Before you restore the system through the recovery USB disk, please make sure that you have already made the backup of your data.
• Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.

1.  Please plug in the USB disk which is at least 20GB in capacity to make the original image (backup the data in USB first. All data will be eliminated during the creation of recovery USB disk)
2. Insert the driver disk to your optical drive and run the install of “Smart USB Backup” (for none-ODD model, please use USB ODD device or download from http://www.gigabyte.com
3. Run the “Smart USB Backup” after finishing the install.
4. Select your USB disk from the drop-down list and start to create the recovery USB disk.
5. The window will pop out when the creation of recovery disk is done.
   • Please press F12 on starting the system when you need to restore the system. Select “boot from recovery USB disk” and the system will be restored.
   • The time needed for restore will be around 30 mins(time needed may vary by USB disk model) .

Recovery Guide

System Recovery (Restore your laptop operating system)
When something is going wrong with the laptop operating system, the storage of the laptop has a hidden partition containing a full back up image of the operating system that can be used to restore the system to factory default settings.

Note

• If the storage has been switched or the partition deleted, the recovery option will no longer be available and a recovery service will be needed.
• The recovery function is only available on devices with O/S preinstalled. Devices with DOS do not have the recovery function.

Launch System Recovery

• The system recovery feature is preinstalled before the laptop is shipped from the factory. The option menu allows you to launch the Windows recovery tool to reinstall the operating system to factory default.
• The brief introduction below will show you how to start the recovery tool and restore your system.

All ready to go
Make sure your PC is plugged in. This will take a few minutes.

Windows 7 Recovery Guide

1. Turn off and restart the laptop.

2. During the laptop turn on process, press and hold F9 key to launch the tool.

3. The recovery will be activated and you will see the option buttons on the window. Click on “Recovery” to start it.
   Caution
   Once the “Recovery” is selected, your personal data and files will be deleted after the laptop starts restoring, and the operating system will be reset to factory default settings.

4. A progress indicator bar will show on the window when the recovery process is running. Please make sure the AC-adapter is plugged in and do not turn off the laptop.

5. Reboot the laptop after the system recovery is complete.

Windows 8.1 Recovery Guide

1. Turn off and restart the laptop.

2. During the laptop turn on process, press and hold F9 key to launch the tool.

3. Choose “Troubleshoot” to enter the recovery settings. (Also you can choose “Continue” to exit recovery system and continue to Windows 8.1 for files or data backup.)
   There are two options for system recovery

   • Refresh your PC
     You can refresh your laptop to improve the system stability without losing your files.

   • Reset your PC
     If you want to remove all of your files, you can reset your PC completely.
     Caution: All personal data and files will be lost.

4. Choose “Refresh your PC”
   Choose an account to continue.

   • Here are what will happen
   • Your files and personalization settings won’t be changed.
   • Your PC settings will be restored to factory default settings.
   • Apps from Windows Store will be kept.
   • Apps you installed from discs or websites will be removed.
   • A list of removed apps will be saved on your desktop.

Choose “Reset your PC”

• Just remove my files
  Only personal data and files will be removed, but computer settings will be kept.

• Fully clean the drive
  The drive will be completely restored to factory default settings. It takes more time. > [Click on “Reset” to execute recovery function.] Here are what will happen

  • All of your personal files and apps will be removed.
  • Your PC settings will be restored to factory default settings.

Advanced options

• System Restore
  Use a restore point recorded on your PC to restore Windows.

• System Image Recovery
  Recover Windows using a specific system image file.

• Automatic Repair
  Fix problems that keep Windows from loading.

• Command Prompt
  Use the Command Prompt for advanced troubleshooting.

• UEFI Firmware Settings
  Change settings in your PC’s UEFI firmware.

• Startup Settings
  Change Windows Startup behavior.

Appendix

• Warranty & Service:
  Warranty and service and related information please refer to the warranty card or GIGABYTE service website as the below link: http://www.gigabyte.com /support-downloads/technical-support.aspx

• FAQ:
  FAQ (Frequent Asked Questions) please refer to the below link: http://www.gigabyte.com/support-downloads/faq.aspx

References

• GIGABYTE Global
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>