SEALEY PC310.V2 20L Wet And Dry Valeting Machine with Accessories User Manual

June 17, 2024
SEALEY

SEALEY PC310.V2 20L Wet And Dry Valeting Machine with Accessories

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-
PRODUCT

Specifications

  • Model Number: PC310.V2
  • Power: 1400W
  • Capacity: 20L
  • Type: Wet & Dry Valeting Machine

Product Usage Instructions

Safety
Electrical safety before
 using the product, it is important to check the following:

  • Inspect all electrical equipment and appliances to ensure they are safe.
  • Check power supply leads, plugs, and electrical connections for wear and damage.
  • Sealey recommends using a Residual Current Device (RCD) with all electrical products.

Additional electrical safety information:

  • Ensure that the insulation on all cables and the appliance itself is safe before connecting it to the power supply.
  • Regularly inspect power supply cables and plugs for wear or damage, and ensure all connections are secure.
  • Make sure the voltage rating on the appliance matches the power supply, and that the plug has the correct fuse.
  • DO NOT pull or carry the appliance by the power cable.
  • DO NOT pull the plug from the socket by the cable.
  • DO NOT use worn or damaged cables, plugs, or connectors. Repair or replace any faulty items immediately with the help of a qualified electrician.
  • If the cable or plug is damaged during use, switch off the electricity supply and remove it from use. Repairs should be carried out by a qualified electrician.

General Safety
Follow these general safety guidelines when using the product:

  • Children aged 8 years and above, persons with reduced physical, sensory, or mental capabilities, and those lacking experience and knowledge can use the appliance under supervision or with proper instruction on safe usage.
  • Children should NOT play with the appliance.
  • Children should not perform cleaning or user maintenance on the appliance without supervision.
  • Always remove the plug from the socket outlet before cleaning or maintaining the appliance.
  • Disconnect the appliance from its power source during service, when replacing parts, and when the removal of the plug is required. Ensure that the plug remains removed during these operations.
  • Before operation, check if the local power supply matches the specifications of the appliance.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
  • Always turn off the appliance and remove the plug after each use or when being repaired.
  • Avoid exposing the machine to strong sunlight and high temperatures to prevent damage to the plastic parts.

FAQ

Q: Can children use this product?

A: Children from age 8 years and above can use the appliance under supervision or with proper instruction on safe usage. However, children should not play with the appliance and should not perform cleaning or user maintenance without supervision.

Q: What should I do if the supply cord is damaged?
A: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid any hazards.

Q: How should I store the machine?
A: It is recommended to keep the machine away from strong sunlight and high temperatures to prevent damage to the plastic parts.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

ELECTRICAL SAFETY
WARNING!

  • It is the user’s responsibility to check the following:
  • 9 Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Sealey recommends that an RCD (Residual Current
  • Device) is used with all electrical products. Electrical safety information. It is important that the following information is read and understood:
  • 9 Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
  • 9 Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
  • Important : Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse.
  • 8 DO NOT pull or carry the appliance by the power cable.
  • 8 DO NOT pull the plug from the socket by the cable.
  • 8 DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is replaced immediately by a qualified electrician. If the cable or plug is damaged during use, switch off the electricity supply and remove it from use. Ensure that repairs are carried out by a qualified electrician.

GENERAL SAFETY

  • 9 Children from age 8 years and above, persons with reduced physical, sensory, or mental capabilities those with lack of experience and knowledge can use the appliance, if they have been given supervision or instruction concerning use of the appliance in a safe way to understand the hazards involved.
  • 9 Children shall NOT play with the appliance
  • 9 Cleaning and user maintenance on the appliance shall not be made by children without supervision.
  • 9 The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
  • 9 Disconnect the appliance from its power source during service and when replacing parts and, if that the removal of the plug is foreseen, it shall be clearly indicated that the removal of the plug has to be such that an operator can check from any of the points to which he has access that the plug remains removed.
  • 9 Before operation, please check if the local power supply is the same as it’s rated in the specification.
  • 9 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • 9 Remember to turn off the appliance and remove the plug every time after use or when being repaired.
  • 9 Keep machine away from strong sunlight and high temperatures in case plastic is damaged.
  • 8 DO NOT use this machine as a pump.
  • 8 DO NOT pull the appliance by the hose.
  • 8 DO NOT stand on the hose or appliance.
  • 8 DO NOT immerse the head unit in water or wash with water in case that water goes into the electronic parts and causes personal injury.
  • 8 DO NOT use this appliance in any combustible and explosive places in case the motor sparks and causes a fire.
  • 8 DO NOT jam the air inlet as this may cause temperature rises and damage to the motor.
  • 8 DO NOT use the appliance to collect combustible and explosive materials such as petrol, oils etc.
  • 8 DO NOT use the appliance to collect sharp objects like pins and screws as this may damage internal components.
  • 8 DO NOT use for ash, hot embers etc.
  • 8 DO NOT use the appliance to collect powders that can easily block the ventilation holes and damage the motor.
  • 8 DO NOT overturn the machine in case water goes into the motor and damages the motor.
  • 8 DO NOT use a cleaning agent or detergent containing solvent.
  • 8 DO NOT collect combustible and explosive objects such as glowing cigarettes, gasoline, etc.
  • 8 DO NOT collect objects which can easily attach on the filter such as calcareousness powder, gesso and graphite powder because those will block the ventilation and damage motor.

INTRODUCTION

Cleans carpets, car interiors, fabrics and upholstery. Constructed from high- impact plastic which is dent-resistant and rustproof. Supplied with carpet lance, handheld lance, full wet and dry vacuum accessory kit, including aluminum rigid extension tube, cartridge filter and foam filter. Powerful pump forces cleaning fluid into fabric/carpet and 1400W suction power leaves the surface virtually dry after one pass. Features safety shut-off for wet operation. Large capacity drum with external detergent tank for easy filling. Fitted with two fixed wheels and two castors. Cable storage hook, accessories and extension tube holders on the head, plus additional accessory storage slots on base.

SPECIFICATION

MODEL NO: PC310 .V2
Drum Size: 20L
Drum Type: Plastic
Filter Type: PET Type Cartridge
Fuse Rating: 3A
Motor Power: 1400W
Optional Accessories: PC200PB5 – Optional Dust Bags (Pack of 5)
Power Supply Cable Length: 4.5m
Replacement Parts: PC310CF – Cartridge Filter
Supply: 230V

RECOMMENDED DETERGENT:

  • Carpet/Upholstery Detergent 2.5L
    • (Single) VMR9225
  • Carpet/Upholstery Detergent 5L
    • (Pack of 4) VMR925
    • (Single) VMR925S
  • Carpet/Upholstery Detergent 25L
    • (Single) VMR92250

CONTENTS

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-FIG-
\(2\)

  1. Tank unit (head, Tank, base)
  2. Flexible hose + detergent spray gun
  3. 2pcs connection tubes
  4. HEPA filter (optional)
  5. Sponge filter (optional)
  6. Sponge filter
  7. Dust bag (for dry use)
  8. Washing brush (for carpet)
  9. Washing brush (for sofa)
  10. Wet & dry floor brush
  11. 2 in 1 crevice nozzle
  12. Detergent tank
  13. 2pcs rear wheels
  14. 2pcs front wheels
  15. 4pcs screws (for rear wheels)

ASSEMBLY

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-FIG-
\(3\)

  • BASE & WHEELS (FIG.1)
    Press the 2pcs front wheels into the base position, and screw the 2pcs rear wheels.

  • DETERGENT TANK (FIG.2)
    Fit the detergent tank on the base, with the humps into the slots. Press the detergent tank onto the stainless steel one, and buckle it.

  • FILTERS (FIG.3, 4, 5 & 6)
    Fit the HEPA filter according to fig.3. Insert the water valve unit into the head unit, and turn it clockwise to lock (fig.4). Before cleaning dry dust, lock the dust bag onto the suction port on the tank (fig.5). Secure the head unit onto the tank (fig.6).

  • HOSE, TUBE, BRUSH & DETERGENT PIPE (FIG.7A & 7B)
    Check the tightness of the following parts, in case of suction and water leakage.

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-FIG-
\(4\)

DETERGENT (FIG.8)
Fill the detergent tank with detergent; the max volume is 3L. Thick detergent should be diluted or the pipe may block.

OPERATION

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-FIG-
\(6\)

SWITCH (FIG.9)
The switch has three options:

  • (I) – Turns the unit ON.
  • (O) – Turns the unit OFF.
  • – Operates the detergent pump and spray gun.

WET OPERATION
CARPET & SOFA WASHING (FIG.10)
Choose the corresponding brush for cleaning. Ensure there is enough detergent in the tank for best performance. Remove the dust bag. Ensure large particles of dust are removed before washing. Press the button of the detergent spray gun to spray the detergent.

NOTE
on the first use, hold for 10 seconds to allow the detergent time to pump out. Move the brush evenly and slowly across the carpet or sofa. Release the button on the backstroke to allow for vacuuming of waste water.

FLOOR CLEANING (FIG.11)
Use the wet & dry floor brush to clean the floor, dust, rubbish, spillage, etc.

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-FIG-
\(7\)

AIRFLOW ADJUSTMENT (FIG.12)
Press the button on the detergent spray gun to adjust the suction.

BLOWING FUNCTION (FIG.13)
Insert the end of the plastic hose into the blower, and twist it clockwise to lock. Switch on the vacuum cleaner to start the blower.

FILTER-CLEANING FUNCTION (FIG.14)
If used to clean thick dust, such as that in a garden, workshop or newly decorated room, the filters will get clogged easily. In this case, press the filter-cleaning button on the back of the unit several times. Suction power should improve afterward.

PROTECTIVE DEVICE – WATER VALVE (FIG.15)
The protective valve begins to work when the tank is full of dirty water. The appliance will make a noise that indicates the motor is running at a higher speed. When this occurs, turn off the appliance and empty the water.

MAINTENANCE

SEALEY-PC310.V2 -20L-Wet-And-Dry -Valeting-Machine -with-Accessories-FIG-
\(9\)

CLEANING (FIG.16A & 16B)

  • After heavy use, or when the barrel is full of dust and dirty water, please follow the procedure below:
  • Unfasten the clips and remove the head unit.
  • Take off the filter bag, pour out and clean up the dust and dirty water in tank, and wipe the tank dry.
  • Wash and clean the filters, including HEPA filter and sponge filters. Filters should be dried before the next use.
  • NOTE : Filters should be changed regularly to ensure optimal performance.
  • Reinstall all the accessories and units as per the assembly instructions above.

LUBRICATING OIL (FIG.17)
Moderate lubricating oil should be added to the sealing locks and pipe jacks for smooth operation.

TROUBLESHOOTING

SYMPTOM POSSIBLE CAUSE SOLUTION
Dust/ liquid / detergent leaks from the hose / tubes / pipes 1. Accessories

are not installed correctly.

2. The rubber seal ring of detergent pipe

has broken or fallen off.

| 1.  Follow the assembly instructions and check the tightness of accessory joints.

2.  Contact your stockist for repair/ replacement, or re-tighten the seal ring.

Weak suction| 1. The filters, tubes, hose or suction port

is blocked.

2. The head unit is not connected correctly.

| 1.  Clean up the filters and the accessories, or make use of the filter- cleaning function.

2.  Reset the head unit and buckle it on the tank as per the assembly instructions.

Abnormal noise when operating| 1. Dirty water tank is full.

2. The vacuum has been turned over.

| 1. Empty the dirty water from the tank.

2.  Ensure the vacuum is upright when operating.

Unit begins to smoke| Overheated, overloaded or damaged motor.| Switch off and unplug from power supply. DO NOT continue to use. Contact your stockist for repair/replacement.
Dirty water or foam is blowing out from the blower or the head.| 1. Filters are not installed correctly.

2.  Filters should be replaced.

3.  Too much foam in the tank.

| 1. Check the installation of filters.

2. Replace the filters with new ones.

3.  Use low-foaming detergent. Clean up the dirty water and foam in the tank.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important : No Liability is accepted for incorrect use of this product.
Warranty : The guarantee is 12 months from the purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SEALEY User Manuals

Related Manuals