GOLD MEDAL 1025 Ice Chest and Merchandiser Instruction Manual
- June 17, 2024
- GOLD MEDAL
Table of Contents
Sno-Kone Caddy®
Model No. 1025
1025 Ice Chest and Merchandiser
Decal and Shelf Installation (General images shown for reference only.)
Unpack the 1025 Sno-Kone Caddy (lift lid slightly and slide it into the
cabinet to open unit), then remove the Shelf and Decal (reference Decal and
Shelf Installation below). Sign Plate with Decal
(Apply decal to a clean sign plate)
Align Top Edge of Decal Step 1: Peel a small portion of backing from the
top edge of the decal. DO NOT remove all the backing at once.
Align decal and press the top edge to the sign plate.
Work any trapped air bubbles toward outer edges. Step 2: Use a plastic
spreader or card to work any trapped air bubbles toward the outer edges.
Step 3: Slowly peel more backing, and continue to work out any air bubbles
until the decal is installed. Step 4: Remove Ice Caddy Spacer, Thumb Screws,
Top Cover and Lid, then place shelf over lip on side of cabinet. Reassemble
unit in reverse order. When reassembling, make sure Top Cover goes
OVER Lid extensions to secure Lid for use.
© 2019 Gold Medal Products Co.
Part No. 110185