GOLD MEDAL 2049 Pretzel Display Case Instruction Manual

June 17, 2024
GOLD MEDAL

GOLD MEDAL 2049 Pretzel Display Case

Product Information

Specifications

  • Model: #2049, #2049EX, 2050*, 2051
  • Part No.: 40340
  • Electrical Requirements:
    • 2049, #2050, #2051: 120 VAC, 1.3 A

    • 2049EX: 230 VAC, 0.7A

Safety Precautions

Before operating the Pretzel Display Case, please read and follow these safety precautions:

  1. Unpack all cartons and check for any damage that may have occurred during transit. File any damage claims immediately with the transportation company.
  2. Ensure that the Pretzel Display Case is placed on a stable surface to prevent tipping or falling.
  3. Remove all packing materials and tape before starting operation.
  4. Do not use a bulb above the maximum allotment of 75 Watts as this can cause damage to the Pretzel Display Case and void the warranty.
  5. It is recommended to plug the machine directly into a wall outlet. The use of extension cords is not recommended.

Installation Instructions

Checking Shipment

Unpack all cartons and check thoroughly for any damage which may have occurred during transit. Damage claims should be filed immediately with the transportation company.

Setup

Your new Pretzel Display Case is completely assembled and tested at the factory. Place the provided 65 Watt flood bulbs in the top interior of the Pretzel Display Case. Remove all packing material and tape before starting operation.

Electrical Requirements

2049, #2050, #2051: 120 VAC, 1.3 A

2049EX: 230 VAC, 0.7A

Note: The Pretzel Display Case is shipped with two recommended 65 Watt flood bulbs. DO NOT use a bulb above the max allotment of 75 Watts as this can cause damage to the Pretzel Display Case and will void your warranty.

It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance.

Operating Instructions

Before You Plug In Machine

Make sure the wall outlet can accept the grounded plugs (where applicable) on the power supply cord. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the outlet and correct if necessary. DO NOT use a grounded to un-grounded receptacle adapter.

Operation

Plug in your new Pretzel Display case, the power switch operates both the lights and rotisserie drive motor*. Turn the power switch to the On position and place pretzels on the rotisserie racks.

*Note: The 2049 and 2049EX is NOT equipped with a rotisserie drive motor.

Ordering Spare Parts

  1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
  2. When ordering, please include part number, part name, and quantity desired.
  3. Please include your model name and machine serial number (located on the machine nameplate) with your order.
  4. Address all parts orders to:
    Parts Department Gold Medal Products Co.
    10700 Medallion Drive Cincinnati, Ohio 45241-4807
    or place orders at:
    513-769-7676 Fax: 513-769-8500 E-mail: goldme19@eos.net

System Parts Location Guide (#2049, #2049EX)

  • Top Pan #2049, #2049EX p/n 40345
  • Set Collar (4) #2049, #2049EX p/n 46649
  • 65 Watt Flood Lamp (2) #2049, #2049EX p/n 41671
  • Light Shield Angle (2) #2049, #2049EX p/n 47799
  • Churro Holder (2) #2049, #2049EX p/n 69832
  • Shaft (1) #2049, #2049EX p/n 77458
  • Bottom Pan #2049, #2049EX p/n 40303
  • Switch #2049, 2049EX p/n 43532
  • Lead-in Cord #2049, 2049EX p/n 22038

FAQ

Q: Can I use a bulb with wattage higher than 75 Watts?

A: No, using a bulb above the maximum allotment of 75 Watts can cause damage to the Pretzel Display Case and void the warranty.

Q: Can I use an extension cord to plug in the Pretzel Display Case?

A: It is recommended to plug the machine directly into a wall outlet. The use of extension cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance.

Instruction Manual
Model #2049, #2049EX, 2050*, 2051

Cincinnati, OH 45241-4807 USA

SAFETY PRECAUTIONS

GOLD-MEDAL-2049-Pretzel-Display-Case-FIG-1

MAINTENANCE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

CHECKING SHIPMENT
Unpack all cartons and check thoroughly for any damage which may have occurred during transit. Damage claims should be filed immediately with the transportation company.

Setup
Your new Pretzel Display Case is completely assembled and tested at the factory. Place the provided 65 Watt flood bulbs in the top interior of the Pretzel Display Case. Remove all packing material and tape before starting operation.

ELECTRICAL REQUIREMENTS

2049, #2050, #2051

120 VAC, 1.3 A

2049EX

230 VAC, 0.7A

Note: The Pretzel Display Case is shipped with two recommended 65 Watt flood bulbs. DO NOT use a bulb above the max allotment of 75 Watts as this can cause damage to the Pretzel Display Case and will void your warranty.

It is Gold Medal Products Company’s recommendation that this machine be plugged directly a wall outlet. The use of extension cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance.

OPERATING INSTRUCTIONS

Before You Plug In Machine
Make sure the wall outlet can accept the grounded plugs (where applicable) on the power supply cord. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the outlet and correct if necessary. DO NOT use a grounded to un-grounded receptacle adapter.

Operation
Plug in your new Pretzel Display case, the power switch operates both the lights and rotisserie drive motor*. Turn the power switch to the “On” position and place pretzels on the rotisserie racks.

*Note: The 2049 and 2049EX is NOT equipped with a rotisserie drive motor.

ORDERING SPARE PARTS

  1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
  2. When ordering, please include part number, part name, and quantity desired.
  3. Please include your model name and machine serial number (located on the machine nameplate) with your order.
  4. Address all parts orders to:
    Parts Department
    Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 or, place orders at:
    513-769-7676
    Fax: 513-769-8500
    E-mail: goldme19@eos.net

System Parts Location Guide (#2049, #2049EX)

GOLD-MEDAL-2049-Pretzel-Display-Case-FIG-4

System Parts Location Guide (#2050, #2051)

GOLD-MEDAL-2049-Pretzel-Display-Case-FIG-5

PARTS LIST – Display Case

Model #2050 & #2051

GOLD-MEDAL-2049-Pretzel-Display-Case-FIG-6

PARTS LIST – Display Case
Model #2049 & #2049EX

GOLD-MEDAL-2049-Pretzel-Display-Case-FIG-7

WARRANTY

  • WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any defective part for a period of six (6) months from the date of sale to the Original Purchaser with regard to labor and two (2) years with regard to parts and does not cover damage to the equipment caused by accident, alteration, improper use, voltage, abuse, or failure to follow instructions.
  • THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
  • THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIP-TION ON THE FACE HEREOF. We neither assume, nor authorize any other person to assume for us, any other obligation or liability in connection with the sale of said GOLD MEDAL equipment or any part thereof.
  • The term “Original Purchaser” as used in this warranty shall be deemed to mean that person, firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS COMPANY, or their authorized distributor for the equipment.
  • THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT 1-800- 428-2676 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIP-MENT  PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERN-ING
  • THE REPAIR OR REPLACEMENT OF PARTS.
    NOTE: This equipment is manufactured and sold for commercial use only.

GOLD MEDAL PRODUCTS COMPANY 10700 Medallion Drive
Cincinnati, Ohio 45241-4807 USA

MODEL #2049, #2049EX, #2050, #2051

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

GOLD MEDAL User Manuals

Related Manuals