AFI R-29572X Bed with Matching Footboard Instruction Manual
- June 17, 2024
- AFI
Table of Contents
AFI R-29572X Bed with Matching Footboard
Product Information
Specifications
- Product Name: Bed with Matching Footboard
- Available Sizes: Twin
- Included Parts: Headboard Panel, Left Leg, Right Leg, Footboard
- Hardware Included: JCB M6 X 40mm (1 1/2) – 6 pcs, Wooden Dowel
- 4 pcs, Allen Wrench – 1 pc
Product Usage Instructions
Assembly of Headboard
- Step 1: Attach the legs (2) and (3) to the headboard panel (1) using the wooden dowels (A) and JCB (B).
- Step 2: Tighten the assembly with the Allen wrench (C).
Assembly of Side Rails and Footboard
- Step 1: Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook.
- Step 2: Use the upper set of pins if using a mattress only, storage drawers, or trundle bed. Use the lower set of pins if using a foundation and mattress.
Assembly of Slat Kit
- Step 1: Assemble the bed frame or bunk bed according to the assembly instructions.
- Step 2: Lay the slat kit (05) onto the bed frame.
- Step 3: Align the slat kit evenly with both ends of the side rail and screw it to the side rail using the wood screws (A). Tighten with a Phillips screwdriver.
Assembly of Trundle Bed
Follow the provided assembly instructions for the Trundle bed.
FAQ
Q: What should I do if I receive a damaged or defective item?
A: Please contact afifurnishings at [email protected] or 1-800-955-3726 for assistance.
ASSEMBLY INSTRUCTIONS
Before assembling your bed, please read through these instructions carefully
and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item, please contact
furnishings at
PARTS LIST
- HEADBOARD PANEL 1 PC
- LEFT LEG: 1 PC
- RIGHT LEG: 1 PC
- FOOTBOARD: 1 PC
HARDWARE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Step 1
Attach the legs (2) and (3) to headboard panel (1), using wooden dowels (A)
and JCB (B). Tighten with the Allen wrench (C).
Congratulations!
Your headboard is now assembled. To ensure lasting safety, we recommend that
you periodically check that all screws are tight and all parts are
secure.
Step 2
Attach slat kit (05) onto the bed. For assembly of slat kit, follow the
assembly instructions included with bed frame.
SLAT KIT
ASSEMBLY INSTRUCTION ( TWIN )
Before assembling your bed slat kit, please read through these instructions
carefully and familiarize yourself with the different parts. Please note that
you will require a Phillips screwdriver.
ATTENTION! If you receive a damaged or defective item, please contact
afifurnishings at
1 1/4” Wood screw – 28 pcs Spare – 2 pcs
HARDWARE
Step 1
Assemble bed frame or bunk bed according to assembly instructions.
Be sure to align slat kit evenly with both ends of side rail.
Screw slat kit (01) to side rail, using wood screw (A). Tighten with Phillips screwdriver. (Customer supplied) Be sure the space between slats is even.
NOTE: WEBBING MUST FACE UP
TRUNDLE BED
ASSEMBLY INSTRUCTIONS
Before assembling your Trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item, please contact furnishings at
HARDWARE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING
ASSEMBLY.
PARTS LIST
- HARDWARE: 1 BOX
- FRONT PANEL: 1 PC
- FRONT RAIL: 1 PC
- BACK RAIL: 1 PC
- SIDE CROSS RAIL: 2 PCS
- CENTER CROSS RAIL: 1 PC
- SLAT KIT: 2 SET
Step 1
Attach the side cross rails (05) and center cross rail (06) to the front and
back rail (03)(04), using L bracket (C), JCB M6 X 1 5/8”(A). Tighten with the
Allen wrench (D).
Step 2
Attach the front panel (02) to the front rail as shown, using JCB M6 X 5/8”
(B). Tighten with the Allen wrench (D).
Step 3
Lay the slat kit (07) onto the rail assembly as shown, using JCB M6 X 1 5/8”
(A). Tighten with the Allen wrench (D).
Congratulations!
Your Trundle bed is now ready for use. We recommend that you periodically check that all screws are tight and all parts are secure to ensure lasting safety.