Stundenglass 20231110 Stündenglass Module For Concentrate Instruction Manual

: May 15, 2024
: Stundenglass

Table of Contents

Getting Started
Home Screen
Settings Menu
Settings
Tank Types
Carb Cap + Battery
TROUBLE SHOOTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Stundenglass 20231110 Stündenglass Module For Concentrate Instruction Manual

CAUTION: DEVICE IS HOT DURING AND AFTER USE. WAIT UNTIL DEVICE IS COMPLETELY COOL BEFORE CLEANING OR HANDLING.

Getting Started

Register device with serial number
Fully charge the Mödul™ via USB-C charging port
Disconnect the magnetic elbow from your Stündenglass Gravity Infuser
Connect the Mödul™ to your Stündenglass® Gravity Infuser via magnetic connection shown
Press dial in for 3 seconds to power on

Spin dial to select function Selected tab will be highlighted

Home Screen

Heating
Select to begin heating.
Once a session is started, the settings are locked.
Press dial to cancel session.
Time
Select to adjust session time.
Spin dial to adjust time.
Press dial to select session time.
Temperature
Select to adjust session temperature.
Spin dial to adjust temperature.
Press dial to confirm temperature.
Settings
Select to open settings menu.
Spin dial to navigate menu.
Press dial to select menu option.

Home

Temperature

Brightness

Color

Lock

Settings

Home takes you back to home screen.
Temperature toggle F°/C° here.
Brightness change between bright and dark modes.
Color select color theme.
Lock lock device on next power on.
In the lock menu, select the lock icon and power down the Mödul. The next time you want to power up the Mödul, long press the dial button until the circle is completely filled. Then release and long press again for 3 seconds to power up the Mödul.

Tanks

Modul will automatically recognize tank type

Ensure the threading on the tank and adapter is clean

NOTE: Ensure the bottom of the adapter and the inside of the device where the tank connects is clean.

Tank Types

Temperature settings
Concentrate

Concentrate

Full Quartz chamber with custom-stamped stainless-steel heating element.
Temperature settings between 482°/250° to 842°/450°.
Heat up time between 15 to 45 seconds.
Cleaning – Wait until device is completely cooled after the end of a session to fully wipe down the quartz chamber with a cotton swab. Isopropyl alcohol can be used.

Dry Material ( tank sold seperately)

Full Quartz chamber with custom-stamped stainless-steel heating element.
Up to 80 watts of power.
Heat up time between 15 to 45 seconds.
No exposed coil.
Cleaning – Wait until device is completely cooled after the end of a session to empty the chamber into an ashtray or bin using the included loading/pick too.

Carb Cap + Battery

Carb Cap
Integrated stainless steel wax tool
with two placement settings.
Magnetic, anodized aluminum carb cap with dual ceramic airflow insert.

6000mAh Li-ion battery
Use only included cable for charging.
Charge Modul when the battery indicator is low.
Charging at 3A will take about 2 hours.
Up to 50 sessions per charge.

TROUBLE SHOOTING

Error
Allow the device to fully cool down before checking the connection.
If there is a connection or other error, the screen will display the red circle with a “!”.
Please check tank connections and try again. The tank icon should be visible on the home screen, if it’s not, there is a connection issue.