CORSAIR TC100 Gaming Chair User Guide
- May 15, 2024
- Corsair
Table of Contents
CORSAIR TC100 Gaming Chair
Product Information
Specifications :
- Brand: CORSAIR
- Product: Gaming Chair
- Includes: Seat back, Seat cushion, Neck/head and lumbar pillow (if equipped), Seat control base, Piston cover, Gas piston, Seat base, Casters, Seat back bracket covers, Assembly hardware and tools
Product Usage Instructions
-
Step 1: Install Casters
Attach the 5 casters to the base of the chair. -
Step 2: Install Piston and Cover
Install the gas piston and cover on the chair base. Remove any protective cover on the gas lift if present. -
Step 3: Assemble Chair Seat Mechanism
Secure the seat base using four screws. Remove any pre-installed screws if necessary. -
Step 4: Install Arm Rests
If your chair does not have pre-installed arm rests, install them using the provided screws. -
Step 5: Secure Seat Back to Seat Cushion
Attach the seat back to the seat cushion using two screws per side. -
Step 6: Place Chair Assembly on Base
Position the chair assembly onto the base. -
Step 7: Place Covers on Hinges
Add hinge covers as needed. Secure with screws if required. -
Step 8: Add Neck and Lumbar Pillows (Optional)
If included, add the neck and lumbar pillows for additional comfort.
Frequently Asked Questions (FAQ)
-
Q: How do I adjust the height and tilt of the chair?
A: Use the tilt lock/height adjustment lever to engage or disengage the tilt lock and adjust the height of the chair. Pull the lever upwards with weight on the chair to lower it and pull it up with an empty chair to increase the height. -
Q: How do I recline the seat back?
A: Pull the recline lever up to recline the seat back forward or backward. Avoid applying pressure to the seat back before pulling the lever to prevent instability.
GAMING CHAIR
QUICK START GUIDE
INTRODUCTION
- Congratulations on your new CORSAIR chair! This quick start guide will walk you through assembly and get you sitting and comfortable as quickly as possible.
- There may be differences in the shape, color, or design of your specific chair, but be assured the assembly techniques shown here are compatible for all CORSAIR chairs.
- We also have a video guide for most of our chairs on the CORSAIR LAB YouTube Channel, found here: www.youtube.com/CORSAIRHowTo
- Thanks for choosing CORSAIR and we hope you enjoy your new chair!
PACKAGE CONTENTS
ASSEMBLY
STEP 1: INSTALL CASTERS
STEP 2: INSTALL PISTON AND COVER NOTE: If there is a protective cover on the tip of the gas lift, remove it.
STEP 3: ASSEMBLE CHAIR SEAT MECHANISM
NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware bag. Use four screws to secure seat base.
STEP 4: INSTALL ARM RESTS
- NOTE: If your chair seat had arm rests pre-installed, you can skip this step.
- NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware pack.
- Arm rests may vary in number of screws required to secure to base.
STEP 5: SECURE SEAT BACK TO SEAT CUSHION
NOTE: On some models, the screws are pre-installed in the seat and will
need to be removed and re-used. In others, the screws are in the hardware
pack. Use two screws per side.
STEP 6: PLACE CHAIR ASSEMBLY ON BASE STEP 7: PLACE COVERS ON HINGES
- NOTE: Some models may also require a hinge cover to be installed with a screw, while others have the cover pre-installed.
- Cover hinge with plastic cover, secure with small screw into chair. Use the plug to cover the screw hole.
- NOTE: Cover, hinge, and plug designs may vary between models.
STEP 8: ADD NECK AND LUMBAR PILLOWS (OPTIONAL)
USER MANUAL
WARNING: Improper use of this chair may cause damage to this chair or result in personal injury. Please use this chair in a non-abusive manner.
-
Tilt lock / height adjustment lever
-
Push the lever towards the center of the chair to engage the tilt lock. Pull it away from the chair to disengage the tilt lock.
-
To lower the height of the chair, pull the lever upwards while weight is applied on the chair. To increase the height, pull the lever up while the chair is empty.
-
Recline lever
-
Pull this lever up to recline the seat back forward or backward.
-
WARNING: Do not apply pressure to the seat back prior to pulling the recline lever. The sudden shift of weight may cause the chair to become unstable which may cause damage to the chair and/or result in personal injury.
-
4D arm rest
NOTE: Not all chairs feature four-way arm rest adjustability, some may feature two or three-way modes instead. -
A. Forward / backward slide button
-
B. In / out button
-
C. Height adjustment tab
-
D. Swivel
-
Tilt tension knob
-
Rotate this knob to increase (+) or decrease (-) the tilt tension.
-
TIP: If the chair tilts easily, you may want to increase the tension. Alternatively, decrease the tension if you find it too hard to lean back while sitting on the chair.
- Web: corsair.com
- Phone: 888-222-4346
- Warranty: corsair.com/support/warranty
- Support: support.corsair.com
- Blog: corsair.com/blog
- Forum: forum.corsair.com
- YouTube: youtube.com/corsairhowto
© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo
are registered trademarks of CORSAIR in the United States and/or other
countries. All other trademarks are the property of their respective owners.
Product may vary slightly from those pictured. 49-002681 AA