Inwa MZ-500K Wireless Speaker User Manual
- June 17, 2024
- inwa
Table of Contents
Inwa MZ-500K Wireless Speaker
Please read the manual carefully before use, and use it strictly according to the requirements of the manual. After reading, please keep it in a safe place for future reference.
SAFETY INSTRUCTIONS
- Please adjust this product to the appropriate volume to avoid damage to your hearing.
- Do not throw to avoid damage to the speaker due to falling.
- Do not place this product near the heat source, and avoid the radiator, stove and other equipment that will generate heat.
- No matter what reason the equipment is damaged, it must be repaired by professional maintenance personnel in time. Unauthorized disassembly will invalidate the warranty.
- This speaker has two modes: Bluetooth mode and TF card mode. When the speaker turns off the microphone function and the music pauses for 10 minutes, the speaker will go into sleep shutdown. To restart the speaker, press the power button ” ”.
PACKAGE CONTENTS
- Speaker X1
- Microphone X1
- Manual X1
- Mountaineering buckle X1
- USB charging cable X1
CONTROL PANEL AND INTERFACE
- Power on/off/mode: press and hold for 2 seconds to turn on/off; Double-click to switch BT/TF mode in the power-on state, and briefly press to turn off/turn on the microphone. The microphone is turned on by default.
- Increase the volume: long press to increase the volume, short press to next song.
- Play/Pause/Pair: in the speaker Bluetooth connection status or TF card mode, press briefly to play/pause; In the Bluetooth connection status of the speaker, short press can play/pause, long press for 2 seconds to forcibly disconnect the current connection, enter the Bluetooth pairing status, and double-click to enter the recording mode, long press for 8 seconds to switch between Chinese and English.
- Decrease the volume: long press to decrease the volume, short press to the previous song.
- Power/Charge indicator (blue/red light) 6 Power Port: DC 5V 1A 7 SD Slot
- Switch on/off button: press and hold for 2 seconds to turn on and 3 seconds to turn off.
- Volume up button: press the microphone to increase the volume.
- Volume down button: press the microphone to decrease the volume.
- EFF Sound effect button: single click in the order of KTV → monster → baby sound → mute on → host.
- Indicator light: in the charging state, the red light is always on, and the red light is off when full; When the microphone is connected, the blue light flashes quickly, and the blue light stays on when working.
- Power Port: DC 5V 1A
PRODUCT PARAMETERS
- Working hours: 10hr(60%volume)
- Standby time: ≥300 hours
- Bluetooth range: ≤10m
- Frequency: 20HZ-20KHZ
- Bluetooth version: V5.0
- Charging time: 2-4 hours
- Working voltage: 5V/1A
- Rated power: 8W
- Waterproof level: IP67
- Battery capacity: 1800mAh
OPREATION INSTRUCTION
Step 1
Long press the power button ” ” for 2 seconds, there will be a power-on prompt sound. After power-on, the blue indicator light flashes quickly, and the speaker enters the Bluetooth pairing state, and the default volume is 80%. Each time the speaker is turned on, the speaker will automatically restore the default volume of 80%.
Notice:
Inserting a TF card during Bluetooth playback will automatically switch to TF card playback mode.
Step 2
Turn on the Bluetooth function on your mobile phone or other Bluetooth device, and then search for the speaker named MZ-500K. Connect to the speaker.
Step 3
After the pairing is successful, there will be a prompt tone and the blue indicator light will be on for a long time.
Step 4
Play music on your phone. When playing music, the blue indicator light flashes slowly.
Step 5
Press and hold the microphone and speaker power button ” ”to turn on the microphone, and press and hold the power button ” ”to quickly flash the blue indicator light of the microphone to pair the microphones. The blue indicator light will stay on when working.
Step 6
How to connect speakers with new equipment:
When connecting the speaker to the device, you can press and hold the
Play/Pause/ Pairing button ” ” for 2 seconds to cut off the current connection
and enter the pairing state. Then, the blue indicator will flash fast and the
speaker can be connected to the new device.
Note:
When Bluetooth is turned on, it will automatically reconnect, and it will turn
off after 10 minutes without connection.
CHARGING TIPS
- When the battery is low, the speaker will give a “low battery” prompt. You need to charge the speaker.
- When charging, the red indicator light is always on, and the red indicator light is off when fully charged.
- It is recommended to charge the product with lithium battery every three months if it is not used.
CONNECTION MEMORY FUNCTION OF THE SPEAKER
- The speaker will automatically connect to the last paired device, in case that BT function of the device is on, after turning the speaker on.
RECORDING MODE
On the premise of inserting the SD card into the speaker, double-click the play/pause/ pairing button ” ”in the playback status to set the recording mode; Double-click the play/pause/pair button ” ”again to stop recording; Press and hold again for 2 seconds to play the recorded recording.
TF CARD MODE
After inserting the SD card, the speaker will enter the TF card mode, You can double click the power button ” ”to enter the mode switch.
In TF card mode, when playing music, the blue indicator light flashes slowly.
GOAL REACH CONSULTING LTD OFFICE 1029 3 HARDMAN STREET 10TH FLOOR, SPINNINGFIELDS MANCHESTER, UK M3 3HF
OST UK 20230424000006
goalservice@hotmail.com
We simply act as UK representative for cross-border sellers, and are not
manufacturers/importers/distributors for the product, nor involved in the
manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the
product. ln case of any product quality or infringement issues, the
manufacturer/importer/seller shall be solely held responsible.
SUCCESS COURIER SL CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA , OFICINA 3, Fuenlabrada, Madrid,28947 Spain
OST_EU_20230424000022
successservice2@hotmail.com
We simply act as EU representative for cross-border sellers, and are not
manufacturers/importers/distributors for the product, nor involved in the
manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the
product. ln case of any product quality or infringement issues, the
manufacturer/importer/seller shall be solely held responsible.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>