JL AUDIO SKU 99837 Universal Amplifier Rack

Product Information

Specifications:

• SKU: SBA-J-JLU-UAR INSTR_SKU# 011516
• Installation Difficulty: 5 out of 5
• Estimated Time: 1 hour
• Compatible with: 2018-Up Jeep Wrangler (JL) Unlimited

Included Hardware:

Amplifier Mounting Template:

The SBA-J-JLU-UAR Amplifier Rack is designed to accommodate several different JL Audio amplifier models (sold separately). Use the illustration below to determine which mounting holes to use:

Product Usage Instructions

Step 1: Install Trim Lock Rubber Seal
A Trim Lock Rubber Seal is included to cover the upper edge of the Amplifier Rack and prevent unwanted contact with the metal surface. Install the Trim Lock Rubber Seal onto the Amplifier Rack by starting at one mounting flange and working it around the two corners. Cut any excess, as needed.

Step 2: Mount the Amplifier
Reference the illustration on Page 3 to determine the required mounting holes for the amplifier being installed. Align the amplifier to the Amplifier Rack with the connections oriented downward, and secure the amplifier using four machine screws as indicated in the included hardware section.

Step 3: Remove Seat Bolts
NOTE : The following steps illustrate the Amplifier Rack installation for the passenger side. The installation procedure for the driver side will be the same. Remove the four-seat bolts.

Step 4: Position and Connect
Position the Amplifier Rack under the seat, and connect the amplifier cables to the amplifier.

Step 5: Secure and Reinstall Seat
Tilt the seat forward, and align the slots in the Amplifier Rack with the factory seat bolt holes. Lower the seat back into position over the Amplifier Rack, and reinstall the four seat bolts.

Frequently Asked Questions (FAQ)

• Q: Will this Amplifier Rack fit other Jeep Wrangler models?
  A: The SBA-J-JLU-UAR Amplifier Rack is specifically designed for the 2018-Up Jeep Wrangler (JL) Unlimited. It may not fit other models without modifications.

• Q: Can I use any amplifier with this Amplifier Rack?
  A: The Amplifier Rack is compatible with several different JL Audio amplifier models. Please refer to the amplifier mounting template and the included hardware section for compatibility information.

INSTALLATION GUIDE for the SBA-J-JLU-UAR
SKU# 99837
2018-Up Jeep Wrangler (JL) Unlimited
Universal Amplifier Rack

IMPORTANT
If you choose to perform the installation yourself, the Stealthbox® must be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems:

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your installation, please read this installation guide completely before beginning the process.

INCLUDED HARDWARE

NOTE : The VXi amplifier shown in this document is for illustrative purposes only. The installation procedure will be the same for all compatible amplifier models.

AMPLIFIER MOUNTING TEMPLATE

The SBA-J-JLU-UAR Amplifier Rack is designed to accommodate several different JL Audio amplifier models (sold separately). Use the illustration and table below to determine which mounting holes to use:

STEPS

1. STEP 1
   A Trim Lock Rubber Seal is included to cover the upper edge of the Amplifier Rack and prevent unwanted contact with the metal surface.
   Install the Trim Lock Rubber Seal onto the Amplifier Rack by starting at one mounting flange and working it around the two corners, as shown. Cut any excess, as needed.

2. STEP 2
   Reference the illustration on Page 3 to determine the required mounting holes for the amplifier being installed. Align the amplifier to the Amplifier Rack with the connections oriented downward, and secure the amplifier using four machine screws as indicated below:

   • 6 – 32 x 1”: For VXi models

   • 6 – 32 x 5/8” : For XDv2, RD, and MX models

3. STEP 3
   NOTE: The following steps illustrate the Amplifier Rack installation for the passenger side. The installation procedure for the driver side will be the same.
   Remove the four-seat bolts.

4. STEP 4
   Tilt the seat backward, and route the amplifier cables to the underseat location.

5. STEP 5
   Position the Amplifier Rack under the seat, and connect the amplifier cables to the amplifier.

6. STEP 6
   Tilt the seat forward, and align the slots in the Amplifier Rack with the factory seat bolt holes. Lower the seat back into position over the Amplifier Rack, and reinstall the four seat bolts.

7. CONGRATULATIONS!
   You have completed the installation for this model! Enjoy your new Stealthbox® Accessory!

954-443-1100
www.jlaudio.com

All specifications are subject to change without notice. “JL Audio®” and “How we play®” are registered trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo are trademarks of JL Audio, Inc.
Printed in USA • ©2020 JL Audio, Inc. • For more detailed information please visit us online at www.jlaudio.com.
JLA-SKU# 011516 • ver. 05.19.2020 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

LIMITED WARRANTY

STEALTHBOV & ENCLOSED SPEAKER SYSTEMS (USA)
JL AUDIO warrants the enclosure and the speaker to be free of defects in materials and workmanship for two (2) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized JL AUDIO dealer. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, JL AUDIO will (at its discretion), repair or replace the defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, and misrepresentations by the seller. This warranty does not cover incidental Or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty. Any applicable implied warranties are limited in duration to the period of the express warranty as provided herein beginning with the date Of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties, therefore these exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If you need service on your JL AUDIO product : All warranty returns should be sent to JL AUDIO freight prepaid through an authorized JL AUDIO dealer and must be accompanied by proof of purchase (a copy of the original sales receipt.) Direct returns from consumers or non-authorized dealers will be refused unless specifically authorized by JL AUDIO with a valid return authorization number. Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date code. Coverage may be invalidated as this date is previous to the purchase date. Return only defective components. If the speaker fails in your Stealthbox• or Enclosure, return only the speaker component, not the entire enclosure. Non-defective items received will be returned freight-collect. The customer is responsible for shipping charges and insurance in sending the product to JL AUDIO. Freight damage on returns is not covered under warranty.
For Service Information in the U.S.A. please call: JL Audio Customer Service: at 954-443-1100 9:00 AM – 5:30 PM (Eastern Time zone)
JL Audio, Inc 10369 North Commerce Pkwy. Miramar, FL 33025 (do not send product for repair to this address)

International Warranties: Products purchased outside the United States Of America are covered only by that country’s distributor and not by JL Audio, Inc.
Printed in USA
SKU#OI 100+1022200/

References

• JL Audio: Car Stereo, Speakers, Subs, Amps, Home Theater
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>