TFA 60.1013 Push Electronic 60.1013 Alarm clocks Instruction Manual
- June 16, 2024
- TFA
Table of Contents
Instruction manual
60.1013 Push Electronic 60.1013 Alarm clocks
Kat. Nr. 60.1013
https://www.tfa- dostmann.de/en/product/analogue-alarm-clock-push-60-1013/#product-information
PUSH – Alarm clock
Thank you for choosing this instrument from TFA.
Before you use this product
- Please make sure you read the instruction manual carefully. This information will help you to familiarise yourself with your new device, learn all of its functions and parts, find out important details about its first use and how to operate it, and get advice in the event of faults.
- Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
- We shall not be liable for any damage occurring as a result of non following of these instructions.
- Please take particular note of the safety advice!
- Please keep this instruction manual safe for future reference.
Field of operation and all of the benefits of your new instrument at a
glance
- Clear functional design
- Analogue display with clock hands
- Snooze function
- Backlight
- Fluorescent clock hands
For your safety
- The product is exclusively intended for the field of application described above. It should only be used as described within these instructions.
- Unauthorised repairs, modifications or changes to the product are prohibited.
Caution!
Risk of injury:
- Keep this instrument and the battery out of reach of children.
- Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
- Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
- Low batteries should be changed as soon as possible to prevent damage caused by leaking.
- Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.
Important information on product safety!
- Do not expose the device to extreme temperatures, vibrations or shocks.
- Protect it from moisture.
Elements
Buttons (Fig. 1)
A: SNOOZE/LIGHT button
B: Alarm switch
C: Red dial for the alarm
D: Black dial for the time
Housing (Fig. 2)
E: Battery compartment
Getting started
- Open the battery compartment at the bottom of the instrument and insert a new battery (1.5 V AA), ensure battery polarity is correct.
- Close the battery compartment again.
5.1 Setting of time
- Turn the black dial and set the actual time (in direction of the arrow).
5.2 Setting of the alarm time
- Turn the red dial and set your respective alarm time (in direction of the arrow).
- Slide the alarm switch upwards (in direction of the arrow ON).
- The alarm is activated.
- Once the alarm starts to ring (4 different alarm steps), you can activate the snooze function by pressing the SNOOZE/LIGHT button on the top of the instrument. The alarm will be interrupted for 4 minutes.
- To deactivate the alarm function, slide the alarm switch downwards (in direction of the arrow OFF).
5.3 Backlight
- Press and hold the SNOOZE/LIGHT button to activate the backlight.
Care and maintenance
- Clean it with a soft damp cloth. Do not use solvents or scouring agents.
- Remove the battery if you do not use the product for a long period of time.
- Keep the instrument in a dry place.
6.1 Battery replacement
- Replace the battery when the alarm tone declines.
- Open the battery compartment at the bottom of the instrument and insert a new battery (1.5 V AA), ensure battery polarity is correct.
- Close the battery compartment again.
Troubleshooting
Problems | Solutions |
---|---|
No movement of clock’s hands | ➜ Ensure battery polarity is correct |
➜ Change the battery
Incorrect indication| ➜ Change the battery
If your device fails to work despite these measures contact the supplier from whom you purchased it.
Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store or
to appropriate collection sites depending on national or local regulations in
order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury,
Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical
and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is
obligated to take end-of-life devices to a designated collection point for the
disposal of electrical and electronic equipment, in order to ensure
environmentally-compatible disposal.
Specifications
Power consumption: | Battery 1 x 1.5 V AA (not included) Use alkaline batteries |
---|---|
Housing dimension: Weight: | 70 x 70 x 35 mm |
81 g (instrument only) |
TFA Dostmann GmbH & Co.KG
Zum Ottersberg 12, D-97877 Wertheim, Germany
No part of this manual may be reproduced without written consent of TFA
Dostmann.
The technical data are correct at the time of going to print and may change
without prior notice.
The latest technical data and information about this product can be found in
our homepage by simply entering the product number in the search box.
www.tfa-dostmann.de
04/21
Documents / Resources
| TFA
60.1013 Push Electronic 60.1013 Alarm
clocks
[pdf] Instruction Manual
60.1013 Push Electronic 60.1013 Alarm clocks, 60.1013, Push Electronic 60.1013
Alarm clocks, 60.1013 Alarm clocks, Alarm clocks
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>