OSRAM Quicktronic T8 Instant Start UNV High Ambient Temp Systems High Efficiency Series Instructions
- June 4, 2024
- OSRAM
Table of Contents
OSRAM Quicktronic T8 Instant Start UNV High Ambient Temp Systems High
Efficiency Series
UNV High Ambient Temp. Systems High Efficiency Series
Lamp / Ballast Guide
32W T8 – OCTRON® lamps
- lamp QHE1x32T8/UNV ISH-HT-SC
- lamp QHE2x32T8/UNV ISH-HT-SC
- lamp QHE3x32T8/UNV ISH-HT-SC
Also operates:
FBO32, FBO31, FO30/SS (30W), FBO30/ SS (30W), FBO29/SS (29W), FO28/SS (28W) &
FO25/SS (25W)
Key System Features
- High Efficiency Systems over 90%efficient
- 90°C maximum case temp.
- Lamp Striation Control (LSC)
- Over 100 LPW (lumens/watt) with OCTRON SUPERSAVER® lamps
- Lowest power T8 PLUS Systems
- Universal voltage (120-277V)
- 1.18-1.20 ballast factor
- 30-50% Energy savings
- Min. Starting Temp:
- -20°F(-29°C) for T8 lamps
- 60°F (16°C) for Energy Saving T8 lamps <10% THD
- Virtually eliminates lamp flicker
- RoHS compliant
- Lead-free solder and manufacturing process
- Same Light, Less Power!
- Up to 6% in energy savings compared to standard T8 low power electronic ballasts without compromising light output
- Maximum energy savings when compared to F40T12 magnetically ballasted systems
- High Light Output:
- Higher lumens per fixture
- Fewer fixtures required for same light output
- Parallel Circuitry: keeps remaining lamps lit if one or more go out.
- Lamp Striation Control (LSC): T8 energy saving lamps should be operated above 60°F, but under certain conditions the lamps may striate. LSC circuitry may minimize or eliminate this condition; however there are limited applications where LSC circuitry may not entirely mitigate lamp striations. These ballasts are also RoHS compliant and feature lead-free solder and manufacturing process.
- High Ambient Temp: specifically designed for those applications where the ballast is subject to higher ambient temperatures, such as high bays in industrial installations.
- QUICKTRONIC High Efficiency (QHE) systems are covered by the QUICK 60+® warranty, the first and most comprehensive lamp & ballast system warranty in the industry.
Application Information
QUICKTRONIC High Efficiency ballasts
are ideally suited for:
- Any applications where the highest light output for the lowest amount of power T8 systems are needed for maximum energy savings
- High bay lighting
- Energy Retrofits
- Commercial & Retail
- Hospitality & Institutional
- New Construction
System Information
QUICKTRONIC High Efficiency (QHE)
System advantages:
- Operate from 120V through 277V
- Eliminates “wrong voltage” errors
- Reduces inventory by 50%
- Utilizes Instant Start operation for
- Highest System Efficacy
- Low temperature starting capability
- Very low harmonic distortion (<10%)THD
- Operate at >42 kHz to reduce potential interference with infrared control systems
SPECIFICATION DATA
Banded Pack Item Numbers, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each. Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value). Preliminary specifications. Please contact OSRAM for additional information.
Specifications
- Starting Method : Instant Start
- Ballast Factor : 1.18-1.20
- Circuit Type : Parallel
- Lamp Frequency : >42 kHz
- Lamp CCF : Less than 1.7
- Starting Temp :2 -20°F (-29°C) for OCTRON T8 lamps; 60°F (16°C) for SUPERSAVER® T8 lamps
- Input Frequency : 50/60 Hz
- Low THD : <10%
- Power Factor : >98%
- Voltage Range : ±10% of 120-277V rated line (108-305V)
UL Listed Class P, Type 1 Outdoor CSA Certified High Ambient Applications: 90°C Max. Case Temp. (3 yr. warranty) Standard Ambient Applications: 70°C Max. Case Temp. (5 yr. warranty) FCC 47CFR Part 18 Non-Consumer Class A Sound Rating RoHS Compliant3 ANSI C62.41 Cat. A Transient Protection GFCI compatible Emergency ballast compatible Remote Mounting (Max. wire length from ballast case to lampholder):
- 20 ft : full wattage T8s
- 10 ft : energy saving T8s
- 4 ft : 25W energy saving T8
- Operation below 50°F (10°C) may affect light output or lamp operation – see “Low Temp. Starting” definition.
- Complies with European Union Restriction of Hazardous Substances Directive (Directive EC 2002/95)
Dimensions “-SC” Small Enclosure :
- Overall : 9.5″ L x 1.68″ W x 1.18″ H
- Mounting : 8.90″
Product Weight:
1.6 lbs each (approx.)
Wiring:
CKTRO
System Life / Warranty
QUICKTRONIC products are covered by the QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. For additional details, refer to the QUICK 60+ warranty bulletin.
Products distributed by LEDVANCE LLC For Customer Service contact 1-800-LIGHTBULB SYLVANIA, QUICK 60+, QUICKSENSE, PROStart, POWERSENSE, and QUICKSTEP are registered trademarks of OSRAM SYLVANIA Inc. QUICK 7XL and QUICK 7XL+are trademarks of OSRAM SYLVANIA Inc. OSRAM and QUICKTRONIC are registered trademarks of OSRAM GmbH. OCTRON, SUPERSAVER, XP, XPS, PENTRON, and ECOLOGIC are registered trademarks of LEDVANCE LLC. DULUX is a registered trademark of LEDVANCE GmbH. Al other trademarks are those of their respective owners. Specifications subject to change without notice. © 2018 OSRAM SYLVANIA Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>