LAMBARIO LT-10 LED Waterproof Lamp Installation Guide
- June 16, 2024
- LAMBARIO
Table of Contents
LAMBARIO LT-10 LED Waterproof Lamp
Mounting instructions
Installation Guide
LED Waterproof lamp: AC200~240V 50/60Hz
WARNING
- Turn the power off before inspection, installation or removal.
- Supply connection and another external wiring conductor shall be at least 1.0 mm? and confirm to 60245|EC57.
The LED waterproof lamp is made from a PC/ ABS body & PC lampshade, Reaching IP65. Can be applied to garages, subway stations, underground passages, clean workshops, warehouses, etc.
Specifications
Installation
- Fasten the two ceiling clips to the installation surface.
- Open the junction box cover of the body with a screwdriver.(DWG1)
- Link to a power source. (DWG2)
- Cover back to junction box cover.
- Install the lamp to the ceiling clips. (DWG3)
- Hanging installation type reference DWG4.
Dimensions
WARNINGS
- Please read the user guide carefully before you install or use the product.
- Before installation, please read and follow the technical specifications and symbols shown in the product box.
- Before installing, make sure that the electrical power is disconnected
- The product is not suitable for regulating circuit breaker
- The product is not suitable for covering with thermo-insulating material
- Do not throw the product away from household waste. Please ask your municipality about how to use it.
- The product must be installed and maintained by qualified persons.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>