Amucolo WM CYMS1 6AAN 2 5 HP Horizontally Foldable Electric Treadmill User Manual
- June 5, 2024
- Amucolo
Table of Contents
Amucolo
USER’S MANUAL
PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. If you have any problems or
concerns, please feel free to contact our customerservice department. We will
reply to you as soonas possible.
E-Mail: [email protected]
Tel: 626-912-8886Ext.100
Product Brief
Main technical parameters
No.| Parameters Names| Description
1| Input voltage| 110V—,50/60Hz
2| Speed| 0.8-14 Km/h
3| Running surface| 4051100 mm
4| Max user weight| 240LBS
5| Expand dimensions| 1380720*1030mm
Packing list
No.| Name| units| Qty|
1| Complete machine| Set| 1|
2| Phone holder| pc| 1|
3| Rotation knob| pc| 2|
4| Accessory bag| Set| 1|
Accessory bag list
NO.| Name| QTY| NO.| Name| QTY
1| 6# inner hexagon wrench| 1| 4| Silicon oil| 1
2| Combination wrench| 1| 5| User manual| 1
3| Remote| 1| 6| Safety key| 1
Security Precautions and Warnings
Tip: Before folding the treadmill, make sure that the surface incline is “zero”.
Notice:
Please read the instructions carefully before use.
- Indoor using and storing the walking board, avoid dampness, and can not be spilled by water.
- Please wear suitable clothes and sneakers before exercise. Prohibited to exercise on the walking board barefoot.
- High power plug must be grounded, the electric outlet should have a dedicated circuit, and do not share with other electrical equipment.
- Keep children away from the machine to avoid accidents.
- Avoid too long time and overload operation, otherwise will cause motor and controller damage, and will accelerate the deterioration of the bearing, walking belt, and board. Should maintain the machine on regular basis.
- Keep the machine away from dust to avoid strong static.
- Please cut the electric power off after using.
- Please maintain good ventilation when running.
- Please clamp security lock cable on your clothing to make sure the machine stops at emergency conditions.
- If you feel not very well when using this machine, please stop and consult a doctor.
- Silicone oil must be kept away from children after use.
- If power cord is damaged, please contact our qualified maintenance personnel for service rather
than disassemble it at your own discretion.
Forbidden
-
Don’t use the machine in the status of the shell break in or break off （the internal structure exposed） or under the condition of welding parts may fall off.
—- Otherwise, an accident or injury may happen. -
Don’t jump up and down in the process of movement.
—- May be injuries caused by the fall. -
Don’t keep machines in or near moist spaces such as the bathroom.
-
Don’t place machines in direct sunlight, or in high-temperature places such as near a stove or a heating appliance.
—-Otherwise may cause leakage and burst into flames. -
Don’t use it when the power cord is damaged or the power plug pin is loose.
—-Otherwise will lead to an electric shock, short circuit, or fire. -
Don’t damage or bent by force or reverse the power cord. Don’t place heavy objects on the machine, donut lamp the power line.
—-Otherwise will cause fire or get an electric shock. -
Don’t use machines for more than 2 people at the same time, and don’t get close to the machine when it is in use.
— Or it may be an accident or injury due to falls. -
People who can’t express their consciousness or can’t operate the machine by themselves cannot usethewalking board.
-
—-May occur accident or injury. Avoid drinking water or pouring water when operating.
—- May cause electric shock and fire. Forbidden! -
People who seldom do exercise shouldn’t suddenly do intense exercise.
-
After eating or when feeling tired, do not use a machine.
-
—- May lead to damage to your health.
-
This product is suitable for family use, and does not apply to schools, gymnasiums and so on.
—- Thereisthedanger of injury. -
Don’t use it when hard objects are in pants pockets.
-
—-May cause accident or injury.
-
Don’t use it when the power plug is on the needle, garbage, or water.
—-May cause electric shock, short circuit, or fire. Do not use wet hands! -
when not in use, pull out the power plug from the socket.
—-The dust and moisture can age the insulation, and result in leakage fire. -
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.4
-
Children should be supervised to ensure that they do not play with the appliance. **** Ground protection system!
-
This product must be grounded. If the machine is dysfunctional, grounding will provide a good channel for electric current, in order to reduce the electric shock risk.
-
This product is equipped with a power plug with a grounding conductor and plug. Completely insert the plug to the standard socket.
-
If the equipment grounding conductor’s connection is improper, it will cause electric shock. If you have doubts about whether your product is grounded correctly or not, please entrust professionals tocheck.
-
Please use the socket which has the same shape as the grounding plug. Don’t use a plug adapter.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved, children shall not play with the appliance, cleaning and user maintenance shall not be madeby childrenwithout supervision.
Installation Instructions
When installing, simply arrange all of the screws in their proper position first, then tighten the screws the treadmill frame has been positioned when the installation of the frame is done
NO.|
Name
|
QTY
|
---|---|---|---
I| Complete Machine|
1 PC
| 
| 6mm inner hexagon
wrench|
1PC
|
| Combination wrench|
1 PC
|
| Safety key|
I PC
|
| Silicon oil|
I R
|
6| Phone holder|
!Pc
|
7| Rotation knob|
I PC
|
| Remote|
I PC
|
9| User’s manual|
I Pc
|
Step1. Put the machine flat on the ground. Stand the upright columns
according to the direction shown in the pictures bellow
Step2. Find the rotation knobs in the accessory bag and use them to lock
the two sides of the upright columns. (Note: Please tighten with clockwise
direction.)
Step3. Align the Phone holder ‘A’with gap‘B’(P1) and install the phone
holder（‘C’）(P3).PushthePhoneholder in the arrow direction. When you hear a
click, the phone holder is installed(P4)
Step 4. Put the safety key on the yellow circle on the console (as shown
below). Press the start button to turn on the treadmill. (Notice: The
treadmill only starts when the safety key is attached to the yellow circleon
the console.)
NOTE: after you have finished putting the treadmill together, make sure that all screws are installed in their appropriate place according to the previous steps. Please be sure all parts are properly locked in and secured by screws before plugging in electricity
Using walking board
1. Insert the power plug properly and turn on the switch(in red color)(1).
When the light is on, there will be abeep a sound. (Note: The switch is on the
right side of the machine.)
1. Folding instruction
Fold the walking board to save your space. Please turn off the switch and
unplug the power line before folding.
A. Loosen(counter-clockwise direction) the two knobs on both sides.
B. Lower the upright columns gradually until they are of the same level as the
walking deck. (Notice: In case of the break of the storage holder, it is
suggested to remove it and store it properly after folding.)
2. Screen display
Display Function
4.1 LED window display
Steps Display: Display the current steps.
Calorie display: Display the current calorie.
Time Display: Display the current time.
Distance display: Display the current distance.
Speed display: Display the current speed.
Start/Stop: In the stop state, press this button to start the walking
board. In running state, press this button to stop the waling board. Speed+:
In the running state, press this button to increase the speed.
Speed-: In the running state, press this button to decrease the speed.
Start Instructions
4.1 Manual mode instruction
4.1.1 Turn the switch on, you will hear a beep sound and the machine enters
manual mode. 4.1.2 Press Start/Stop button, the screen will display numbers
and the walking board starts running.
4.2 Bluetooth App Control (According to the actual configuration)
Use a mobile phone app to control the walking board. Use your phone to scan
the QR code below to download the app
https://h5.zjlijiujia.com/appdownload/index.html
4.3 Infrared Remote Control ( According to actual configuration)
When the power is on, long press the start/stop button on the remote for
around 7 seconds to match with the machine(continuous beep sound indicates the
success of matching. If there is no beep sound, it means the matching is not
done.). After matching, the remote can be used to control the walking board.
PresstheStart/Stop, Speed+, Speed- to control the walking board.
5. Sleep Mode
The system is with energy saving function(sleep mode). If there is no control
command in 10 mins, the system will enter energy-saving mode and the screen
stops displaying. Press any button can awaken the system
Translation of Error Codes
| Error code | Description | Solution |
|---|---|---|
| E1 | Communication Abnormal: |
when the power is on, the connection between lower controller and the console
is abnormal.| Possible Cause:
The communication between the lower controller and console is blocked, check
each joint between the controller and console, and ensure that each core is
fully lugged in. Check the connection line, and replace it if it’s amaged.
E2| No signal from the motor.| Possible Cause:
Check the motor cable to see whether it is connected well or not, if not,
connect the motor wire again. Check the motor cable to see whether it is
damaged or has a burnt smell, if yes, replace the motor. Check the speed
sensor to see whether it is correctly installed or damaged
E5| Over current protection:
In working, the lower controller detects the current to be over 6A for more
than 3 seconds.| Possible Cause:
Overloading leads to excessive current, and the system stops out of self-
protection, or some part is stuck, causing the motor to stop. Adjust the
walking board and restart it. Check if there is a liquid or burnt smell while
the motor is running, if yes, replace the motor; check if the controller has a
burned smell, if yes, replace the controller, check the power supply voltage,
if it does not match the specifications, change into correct voltage and test
the machine again.
E6| Explosion-proof impact protection: the abnormal
voltage or
the motor causes the faulty circuit that drives the motor.| Possible Cause:
Check if the power supply voltage is 50% lower than normal voltage, use the
correct voltage and test the machine again; check if the controller has a
burnt smell and replace the controller; Check if the motor cable is connected
and connect the motor wire again.
Routine maintenance
Warning: Before cleaning or maintaining products, please be sure the
power plug of the walking boards is pulled out.
Cleaning: Comprehensive cleaning will extend the using life of the
electric walking board. Remove dust periodically in order to keep the parts
clean. Be sure to clean the walking belt on both sides and sof the exposed
portion, which will reduce the accumulation of impurities. Make sure to wear
clean at hleticshoes to avoid carrying the dirty matters into the running
board and belt. walking board belts shall be clean edbyadamp cloth with soap.
And please pay attention to avoid wetting the electrical components and
walking belt. Warning: Make sure the power plug is disconnected before
moving the motor cover away, and clean the motor at least once a year.
Running belt specialized lubricant
This walking board’s deck and the walking belt have been lubricated in a
factory. Friction between the walking belt and deck has a great influence to
the using life and the performance of the walking board,
thereforeregularapplying of lubricant is needed. We advise you to check the
board regularly. If the board’s surface is damaged, please contact our
customer service center. We advise using lubricant between the walking belt
and running board with the following schedule:
Lightweight user (use less than 3 hours a week) once per month;
Heavyweight use (use more than 7 hours a week) once every half month. 1. In
order to better safeguard your electric walking board and extend the life of
the machine, it is recommended that after your continued use of two hours,
turn off the machine and let it rest for 10 minutes before using it again. 2.
If the walking board belt is too loose, there will be skid phenomenons while
using; if it’s too tight, it reduces motor performance and hardens the
abrasion of the roller and the walking belt. You can lift two side softhe
walking belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness
In order to better use the walking board and make the walking board functions
work better, it is necessary for you to adjust the walking belt to the best
condition.
Running Belt alignment
- Put the walking board flat on the ground.
- Make the walking board run at a speed of about 6-8km/hour.
- If the walking belt is closer to the right, rotate the right adjusting bolt with 1/2 turn counter-clockwise, then rotate the left adjusting bolt with 1/2 turn clockwise. (Picture B)
- If the walking belt is closer to the left, rotate the left adjusting bolt with 1/2 turn counter-clockwise,then rotate the right adjusting bolt with 1/2 turn clockwise. (Picture A)
Applying silicone oil
Step 1: Use scissors to cut the upper end of the oil bottle (Picture 1).
Step 2: Uncover the oil tank cover located on the motor cover(Pictures 2
and 3).
Step 3: Squeeze the silicone oil into the oil tank(Picture 4).
Step 4: Start the walking board, adjust the speed to 5-6 km/h, and run
for 5 minutes to make the oil evenly distributed on the walking belt.