PEGASUS ASTRO SCOPS OAG in front of the Falcon Rotator Installation Guide
- June 6, 2024
- PEGASUS ASTRO
Table of Contents
PEGASUS ASTRO SCOPS OAG in front of the Falcon Rotator
Installation
-
Remove the 6 x M3 set screws from the rotator (keep them in a safe place as you don’t need them anymore)
-
Disassemble the M54 ring adapter from SCOPS body by removing the 6 x M4 bolts.
-
Use the 6 x M3 bolts (that were included with the SCOPS OAG) to tight down the M54 ring adapter on the Falcon Rotator body.
-
Place the SCOPS body with the preferable orientation on the M54 ring adapter and tight back the 6 x M4 bolts.
You are ready to go!!!
Documents / Resources
|
PEGASUS ASTRO SCOPS OAG in front of the Falcon
Rotator
[pdf] Installation Guide
SCOPS OAG in front of the Falcon Rotator
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>