KARTNERS 224464 Windsor Collection Towel Ring Installation Guide
- June 2, 2024
- KARTNERS
Table of Contents
KARTNERS 224464 Windsor Collection Towel Ring
Product Specifications
- Product Name: Windsor Collection Towel Ring 224464
- Includes: Mounting Plate, Wall Screws, Towel Ring
- Tools Required for Installation: Level, Pencil, Screwdriver,Drill Hammer
- Set Screw Size: 2.5mm
PACKAGE CONTENT
Tools required for installation
Product Usage Instructions
Step 1
- Loosen the set screw on the accessory and remove the backing plate.
- Position the accessory against the wall and mark the outline with a pencil.
Step 2
Position the backing plate flat side down on the wall and mark holes with a
pencil.
Step 3
- Pre-drill 3/16 holes on the wall to fit wall plugs.
- Insert wall plugs into the wall.
- Position backing plate flat side down over the plugs and install screws.
Step 4
Slide the accessory onto the backing plate and tighten the set screw using the
Allen key provided.
Frequently Asked Questions (FAQ)
Q: What should I do if I don’t have a drill hammer?
A: If you don’t have a drill hammer, you can use a regular hammer or seek
assistance from someone who has the required tools.
Q: What if I lose the Allen key provided for tightening the set screw?
A: You can use a similar-sized Allen key or purchase a replacement from a
hardware store.
KARTNERS.COM 1.877.490.3537 604.628.0567
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>