BLITZWAX WAX WARMER KIT User Manual

June 16, 2024
BLITZWAX

BLITZWAX WAX WARMER KIT

BLITZWAX-WAX-WARMER-KIT-PRODUCT

Product Overview

BLITZWAX-WAX-WARMER-KIT-PRODUCT OVERVIEW

INTRODUCTION

Congratulations on the purchase of the Blitzwax Waxing Kit. You have selected a high-quality product. Please familiarize yourself with all operating and safety instructions BEFORE using this appliance.

INTENDED USE

This appliance has been designed exclusively for hair removal of legs, armpits, and the bikini zone on the human body. The warmer is suitable for use for all wax types (including canned wax). It is intended solely for use in private households.

TECHNICAL DETAILS

  • Voltage :110 – 240 V ~ (AC), 50 – 60 Hz
  • Power consumption :50 W
  • Capacity : 500 ml

This product has been tested to comply with EMC Directive (2014/30/EU), LVD Directive (2014/35/EU), and FCC standards.

  • During the first few minutes of initial use, you may notice a slight odor. This is normal and will quickly disappear.

BLITZWAX WARNING:
Please note that hair removal (of any kind!) can cause trauma to the skin, and normal skin reactions may occur such as redness, swelling, tenderness, etc.

  • Before waxing, do a 24-hour patch test to see how the skin reacts.
  • Beware of burns. Wax can reach high temperatures and cause burn injuries!
  • Do not wax the area with redness, inflammation, swelling, open wounds, burns, eczema or psoriasis.
  • Please consult with your doctor before use if you are susceptible to allergic reactions or have any health concerns.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed including:
READ ALL INSTRUCTIONS BEFORE USING

DANGER – To reduce the risk of ELECTROCUTION:

  1. Always unplug this appliance immediately after using it.
  2. Connect this appliance to a properly grounded outlet only.
  3. Do not use it while bathing or showering.
  4. Do not place or store appliance where it may fall or be pulled into a tub or sink.
  5. Do not immerse the appliance in water or other liquids!
  6. NEVER reach in to get an appliance that has fallen into the water. Make sure you don’t stand in water and unplug immediately with electrically insulated gloves

WARNING!

RISK OF ELECTROCUTION!
NEVER use this appliance near a bathtub, shower or other vessels filled with water.

CAUTION – To reduce the risk of fire, burns, electric shock, or any other injury:

  1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, provided that they are under supervision or have been told by a responsible person regarding the use of the appliance in a safe way and understand the potential risks involved
  2. Always test before use: apply hot wax on a small area of the skin for warmth and possible skin reactions.
  3. Use this appliance on a level, heat-resistant surface.
  4. Do not leave the appliance unattended while it is being operated or plugged in.
  5. Use this appliance only for its intended use. The use of attachments not recommended by the manufacturer may cause hazards.
  6. Do not allow children to play with the appliance.
  7. Close supervision is necessary when this appliance is used near children or invalids.
  8. Unplug from the outlet when not in use. Allow cooling before handling, cleaning, or storing the appliance.
  9. Never operate this appliance if it has a damaged cord or plug, if it is not working properly if it has been dropped or damaged in any manner or dropped into water.
  10. Keep the cord away from hot or heated surfaces. Do not wrap the cord around the appliance.
  11. Do not drape the cord over a counter or a tabletop in such a manner that it can be pulled on by a child or tripped over unintentionally
  12. The use of an extension cord is not recommended.

QUICK-START GUIDE

  1. READY
    Hair should be 1/4 inch long to wax effectively. Your skin should be clean and dry.

  2. SET
    Put wax into the wax warmer and allow the beads to melt until it’s the consistency of honey.

  3. TEST
    Test a small amount of melted wax on the inside of your wrist to make sure that it’s not too hot.

  4. APPLY
    Using the applicator, apply the wax in the direction of hair growth. Work in small manageable sections.

  5. COOL
    Wait for 30-45 seconds and allow the wax to harden. It’s ready to remove as soon as it’s no longer sticky to the touch.

  6. PULL
    Hold skin taut. Flick the edge of the wax-up and pull quickly in the opposite direction of hair growth.

USER INSTRUCTIONS

HOW TO USE BLITZWAX WAX WARMER

  1. Fill the removable pot with 3.5-11 oz wax beads.
  2. Place the pot into the designated insert within the warmer.
  3. To melt wax quickly, place the lid on and turn the dial clockwise to max heat.
  4. After the wax is melted into a liquid consistency, adjust to your desired temperature.BLITZWAX-WAX-WARMER-KIT-INSTRUCTION

You’ll see the indicator light turn from red to off when the desired temperature is reached.

  • The temperature will remain constant, meaning the warmer will automatically turn on to heat wax when it drops below the desired temperature.

HOW TO USE BLITZ WAX WAX BEANS
To perform an effective result, it’s recommended that you follow the instructions below:

  1. Allow the wax to melt completely. We recommend a temp between 150-180℉.
  2. The best indication that your wax is the right applicable temperature is when it resembles the consistency of thick honey.
  3. Always use it with caution. It’s important to test a small amount of melted wax on the inside of your wrist before application.
  4. Make sure your skin is completely dry before waxing. Apply some baby powder to soak up any excess moisture if necessary.
  5. Using the applicator, apply wax in the direction of hair growth. Use firm pressure to ensure each hair is shrink-wrapped with wax.
  6. Wait 30-45 seconds and allow the wax to harden.
  7. It’s ready to be removed as soon as it’s no longer sticky to the touch. Hold skin taut. Flick the edge of the wax-up and pull quickly AGAINST the direction of hair growth.
  8. Repeat over different sections until the desired area is soft, silky hair-free.
    READ ALL INSTRUCTIONS BEFORE USING.

EASY CLEANUP OF WAX POT

Note : You don’t need to clean the wax pot after each use!

The leftover wax can be melted and reused for application next time.
To clean your pot, please ensure that the appliance is unplugged but still warm. Use cotton muslin strips or paper towels to wipe clean. You can also use a wax warmer cleaning solution or a small amount of oil.

PRO TIPS
To achieve a more effective hair removal result, we strongly recommend you to:

  • Apply wax in the direction with hair growth and remove in the opposite.
  • Hydrate and exfoliate a day or two before waxing.
  • On the day of waxing, avoid using any lotions or creams.
  • When removing, pull the wax parallel and close to your waxed skin.
  • Avoid undue sun exposure for 24-48 hours.
  • Exfoliate after at least 24 hours to help prevent ingrown hairs.
  • Get on a regular waxing schedule and avoid shaving in between waxing

APPLICATION

  • Apply wax following the direction of hair growth
  • Remove AGAINST the hair growth

LOCATION

  • Please treat only small areas at once if you are new to waxing.

EYEBROWS

  • U-Brush, shape, and cut brows before waxing.
  • Use the mini brow applicator and wax in small sections for precise results.
  • Use Vaseline or coconut oil as a protective barrier over any brow hair you don’t want the wax to stick to.
  • Be cautious that wax doesn’t drip into the eyes.

UPPER LIP, CHIN & CHEEKS

  • Wax your upper lip in three sections: right, left, and center.
  • Facial hair can grow in swirls, so stick with small sections.

UNDERARMS/LEGS

  • Note the hair growth pattern before you begin. You may need to wax in several sections if, your armpit hair grows in multiple directions.
  • Applying against hair growth may be necessary to completely pick up all the hair.

BIKINI & BRAZILIAN

  • Have a mirror on hand.
  • Sit on the floor or on your bed with a towel under you, with the soles of your feet touching each other.
  • Start waxing from the outside edges of the hairline, where your hair is thinnest and less sensitive.
  • Take note of the way your hair grows. Work in small manageable sections.
  • Hold your skin taut while removing wax, especially in sensitive areas prone to bruising

TROUBLESHOOTING Q+A

  • Why didn’t the wax remove all my hair?

    • The hair was too short. The ideal length for the wax to grip and remove hair from root is 0.25inch-0.75inch (0.6cm-2cm).
    • The wax was too cool. Heat the wax until it’s the consistency of honey.
    • sometimes hair grows in multiple directions. Try a second application while applying the wax in an alternate direction.
    • If hair remains after 2-3 passes, it’s best to clean up with tweezers.
    • Apply more pressure with the applicator. Firm pressure ensures each hair is shrink-wrapped with wax
  • Why is the wax residue left on my skin?

    • The wax was applied too thin. Use a little more. Apply it about a nickel thick.
    • The wax was applied unevenly. With practice, you will avoid this issue.
    • Use the AFTER-Wax treatment oil to remove any residue.
  • How long should my hair growth be?
    We advise waiting until your hair is at least ¼ inch in length (around the size of a grain of rice). If your hair is too short, there won’t be enough length for the wax to grip it, and your results won’t be successful.

  • Are there any concerns I should be aware of?

    • Avoid applying wax to moles, warts, mucous tissue, and sunburned or irritated skin.
    • Do not use wax if you’re taking Retin-A or Accutane.
    • Do not wax after plastic surgery or a chemical peel until approved by a physician.
    • Avoid sun and hot water for 8 hours after use.
  • Do I need cloth strips?
    Nope. No cloth strips are needed with hard wax.

  • Is that normal If the wax warmer auto turns on and off?
    This wax warmer has an AUTOMATIC POWER OFF FUNCTION — When the wax warmer is a hot temperature, the indicator light will turn down automatically and turn on when the temperature is low.

1-YEAR MANUFACTURER WARRANTY

Your product will either be repaired or replaced by BLITZWAX® if any defect in material or workmanship occurs within ONE year from the date of purchase. The repair or replacement of a product does not signify the beginning of a new warranty period. Please note this warranty does not apply if:

  1. The product has been damaged by accident, abuse or mishandling.
  2. The product has been used in a way that does NOT follow the Blitzwax Wax Warmer User Manual.
  3. Units subjected to unauthorized repair.

Manufacturer :
ZHONGSHAN CITY PINK DIAMOND COSMETICS TECHNOLOGY CO., LTD.
U.S. FDA Establishment ID: 1009665

Address:

  • Building 11, No.11, Gangbao Road
  • Tongmao Industrial West Avenue, Dongsheng Town
  • Zhongshan City, Guangdong Province, P. R. China

Email : pinkdiamond2019@hotmail.com
Authorized Representative

  • Please note that the following address is not the service address.

ENBRIDGE ADVISORY GMBH
Virginia Str. 2 35510 Butzbach, Germany eubridge@outlook.com

TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK tanmetbiz@outlook.com

Disposal

Please DO NOT dispose of the appliance in your normal domestic waste. This product is subject to the provisions of the WEEE Directive (2012/19/EU). Disposal can take place through an approved disposal center at your community.

BLITZWAX-WAX-WARMER-KIT-DISPOSAL.1Please contact your local community or municipal authorities if you have any doubts about how to dispose of the worn-out product. The environmentally friendly packaging can be easily disposed of at any of your local recycling facilities.

1-Year Manufacturer Warranty
Please note: The warranty is ONLY valid AFTER your registration.

Scan code to activate warranty!

CONTACT US
Should you have any concerns with your order, please reach out and allow us the opportunity to make it right.

The manual is also available in

  • German (Deutsch)
  • French (Français)
  • Italian (Italiano)
  • Spanish (Español)

Email :support@blitzwax.us
gOOgle :blitzwax.us
facebook :facebook.com/blitzwax

FAQs

What is included in the BLITZWAX Wax Warmer Kit?

The BLITZWAX Wax Warmer Kit typically includes a wax warmer, a variety of wax beads, applicator sticks, and possibly pre and post-waxing treatments. The exact contents can vary based on the kit.

Are there different temperature settings on the BLITZWAX Wax Warmer?

Yes, the BLITZWAX Wax Warmer typically has adjustable temperature settings to accommodate different types of wax and user preferences.

Is the BLITZWAX Wax Warmer portable?

While the BLITZWAX Wax Warmer is designed for home use, its compact size can make it relatively easy to transport for personal use during travels.

Can I use different types of wax in the BLITZWAX Wax Warmer?

Yes, the BLITZWAX Wax Warmer is compatible with different types of wax, including hard wax, soft wax, and wax beads. It's important to follow the instructions for each type of wax.

How long does it take for the BLITZWAX Wax Warmer to heat the wax?

The time it takes for the BLITZWAX Wax Warmer to heat the wax can vary, but it generally takes between 10 to 20 minutes to reach the optimal consistency.

What are the safety features of the BLITZWAX Wax Warmer?

The BLITZWAX Wax Warmer typically includes safety features such as adjustable temperature control, a heat-resistant body, and an auto-shutoff mechanism to prevent overheating.

Is it easy to clean the BLITZWAX Wax Warmer after use?

Yes, the BLITZWAX Wax Warmer is designed for easy cleaning. Let the wax harden and then remove it. For residual wax, heating it slightly and wiping it with a cloth or using a wax cleaner is recommended.

How long does the waxing result last when using the BLITZWAX Wax Warmer?

The results from using the BLITZWAX Wax Warmer can last from 3 to 6 weeks, depending on the individual's hair growth cycle. Regular waxing can potentially lead to finer and sparser hair growth over time.

Can the BLITZWAX Wax Warmer be used for both face and body?

Yes, the BLITZWAX Wax Warmer can be used for hair removal on both the face and body. It's important to use the appropriate type of wax and technique for each area.

Is the BLITZWAX Wax Warmer suitable for all skin types?

The BLITZWAX Wax Warmer is generally suitable for most skin types. However, individuals with sensitive skin should test the wax on a small area first and consult with a dermatologist if they have concerns.

How do I use the BLITZWAX Wax Warmer?

To use the BLITZWAX Wax Warmer, plug it in and turn it on to heat the wax beads. Once the wax is melted to a suitable consistency, use the applicator sticks to apply the wax to the desired area of the skin. Allow the wax to cool and harden before pulling it off against the direction of hair growth.

Download This Manual PDF:BLITZWAX WAX WARMER KIT User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals