milwaukee L4 FL USB Rechargeable Pocket Flood Light Instructions
- June 4, 2024
- Milwaukee
Table of Contents
milwaukee L4 FL USB Rechargeable Pocket Flood Light
INSTRUCTIONS
Description see text section.
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS BATTERY-LAMP
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Don‘t use this tool in wet areas.
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
SAFETY INSTRUCTIONS BATTERY
- Only use Milwaukee Type L4B2 rechargeable batteries.
- Remove the battery pack before starting any work on the appliance.
- Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offer to retrieve old batteries to protect our environment.
- Do not store the battery pack together with metal objects (short circuit risk).
- Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water.
- In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The battery lamp is intended to be used light independent use away from the
mains supply. Do not use this product in any other way as stated for normal
use.
CHARGING
- Plug your USB cable into a power source such as an AC wall adaptor, computer or carport. The indicator light will display the charging status:
- Red fl ashing: charging, 0-25% charged
- Orange fl ashing: charging 25-80% charge
- Green fl ashing: charging, 80-99% charged
- Green solid: 99-100% charged
- Red/Green fl ashing: damaged or faulty battery
- If the light indicator fl ashes red and green, check that the battery is fully seated into the bay. Remove the battery and reinsert. If the light continues to flash red and green, the battery may be extremely hot or cold, or wet. Allow the battery to cool down, warm up, or dry out and then reinsert. If the problem persists, contact a MILWAUKEE service facility.
FUEL GAUGE
- The fuel gauge will display the battery life: Red fl ashing: 0-10% remaining
- Red solid: 10-25% remaining
- Orange solid: 25-80% remaining
- Green solid: 80-100% remaining
BATTERIES
- Battery packs that have not been used for some time should be recharged before use.
- Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
- The contacts of chargers and battery packs must be kept clean.
- For an optimum lifetime, the battery packs have to be fully charged, after used.
- To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
- For battery pack storage longer than 30 days:
- Store the battery pack where the temperature is below 27°C and away from moisture Store the battery packs in a 30% – 50% charged condition
- Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that the battery pack is secured against movement within the packaging.
- Do not transport batteries that are cracked or leak.
Check with the forwarding company for further advice
MAINTENANCE
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
-
CAUTION! WARNING! DANGER!
-
Please read the instructions carefully before starting the machine.
-
Do not stare at the operating light source.
-
Class III electrical protection.
-
Do not dispose electric tools, batteries/rechargeable batteries together with household waste material.
Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice and collection point. -
European Conformity Mark
-
British Confomity Mark
-
Ukraine Conformity Mark
-
EurAsian Conformity Mark
TECHNICAL DATA
- Rated Power …………………………………………………………………4,5 W
Lighting time with one fully charged battery
Mode High…………………………………………………………………….2 h
Mode Low ……………………………………………………………………..11 h
Luminus fl ux
Mode High…………………………………………………………………….445 lm
Mode Low ……………………………………………………………………100 lm
Charging time ……………………………………………………………….120 min
Colour rendering index (CRI)………………………………………….80
Colour temperature………………………………………………………….4000 K
Battery voltage……………………………………………………………….. 4 V
USB-input ……………………………………………………………………..5 V DC; 0,1 A – 2,1 A
Weight ……………………………………………………………………………. 0,2 kg
Recommended battery types………………………………………………L4B2
Recommemded USB power supply……………………………………CUSB