Lumens PS751 Desktop Document Camera User Guide
- June 16, 2024
- Lumens
Table of Contents
Lumens PS751 Desktop Document Camera
Important
- Please activate your warranty at www.MyLumens.com/reg
- Please visit our website www.MyLumens.com/goto.htm to download the latest version of the Software, Multilingual User Manual and Quick Start Guide.
User Condition
- For the installation instructions, please refer to the 2. Installation & connection on the rear side.
Getting Started
- Please confirm the local voltage and frequency, for example, the default 60Hz is applicable in the US, Taiwan, Japan, etc., and 50Hz in Europe and other areas. Please set up the DIP SWITCH as in the figure on the right please see PS751 User’s Manual Attachment 1 for the frequency used.
- Pull up the camera and the camera arm. The camera should aim at the center of the presenter.
- Pull up the lamp arm and adjust it to the appropriate position.
- Place an object to be displayed under the camera. A Turn the power on.
- Press the [AUTO TUNE ] button to optimize the image. You are ready to teach / present.
- According to your request, you can adjust the camera head slightly to aim at the centre of the documents when the anchor of the lens is reached.
- Pull up the camera and the camera arm. The camera should aim at the center of the presenter.
- Pull up the lamp arm and adjust it to the appropriate position.
- Place an object to be displayed under the camera.
- Turn the power on.
- Press the [ AUTO TUNE button to optimize the image. You are ready to teach / present.
According to your request, you can adjust the camera head slightly to aim at the centre of the documents when the anchor of the lens is reached.
Installation & Connection
- Connect to a Projector or Monitor
- Connect to a Computer and Use Lumens’ Software or Connect to an Interactive Whiteboard (IWB).
- Connect a Projector, Computer and Monitor simultaneously
- Connect to a TV
- Connect to an HDTV
- Connect to a Computer or DVD
- NTSC: USA, CANADA, MEXICO, PANAMA, CHILE, JAPAN, TAIWAN, KOREA AND PHILIPPINES.
- PAL: Country/region not listed above.
- Please confirm the local voltage and frequency, for example, the default 60z applicable in the US, Taiwan, Japan, etc., and 50Hz in Europe and other areas. Please see PS751 User’s Manual Attachment 1 for details.
- After the unit is restarted, the new DIP switch configuration is effective. Once C-Video is on, VGA is not supported.
References
Read User Manual Online (PDF format)
Loading......