MAGNAVOX 50ME314V Video Cassette Recorder Owner’s Manual

MAGNAVOX 50ME314V Video Cassette Recorder

Owner’s Manual

55ME314V, 50ME314V, 40ME314V, 40ME324V, 32ME304V, 28ME304V, 39ME313V/F7 A

Register Online at www.magnavox.com/support today to get the very most from your purchase.

Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don’t miss out. Register Online at www.magnavox.com/support to ensure:

*Product Safety Notification

By Registering your Product, you’ll receive notification -directly from the manufacturer – in the rare case of a Product Recall or Safety Defect.

*Additional Benefits

Registering your Product guarantees that you’ll receive all of the Privileges to which you’re Entitled, including special money-saving offers.

Know these safety symbols

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The caution marking is located on the rear or bottom of the cabinet

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specififies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding as per NEC – National Electric Code

Wall Mount Bracket Kit

• The recommended Wall Mount Bracket Kit (sold separately) allows the mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to the Wall Mount Instruction Book.
• Funai is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto the Bracket on your own.
• The Wall Mount Bracket must be installed by experts.

Funai is not liable for these types of accidents or injury noted below.

• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a Wall Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket while your TV is plugged in or Turned On. It may result in an electrical shock injury.

When installing the unit on the wall, allow this much space.

• Top: 11.8 inches (30cm)
• Left and right side: 5.9 inches (15cm)
• Bottom: 3.9 inches (10cm)

1. Notice

MAGNAVOX is a registered trademark of Philips North America Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips North America.
Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this Owner’s Manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Funai warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Funai will be adapted and published on the Funai support website as soon as possible.

Pixel characteristics
This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty
No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this Owner’s Manual, any adjustments or assembly procedures not recommended or authorized in this Owner’s Manual shall void the warranty.

Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.

Declaration of Conformity

Trade Name : MAGNAVOX
Responsible Party : FUNAI CORPORATION, Inc.
Model : 55ME314V, 50ME314V, 40ME314V,
40ME324V, 32ME304V, 28ME304V,
39ME313V/F7 A
Address : 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
Telephone Number : 1 866 341 3738

Modifications
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the Owner’s Manual.
The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

Cables
Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC

Rules and Regulations.

Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.

Copyright
All other registered and unregistered trademarks are the property of their respective owners.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

Consumer Notice:
This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings.
Changing or enabling other features in this TV (e.g. brightened backlighting) will possibly increase energy consumption beyond the original ENERGY STAR® qualified limits.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).

The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
© 2013 Funai Electric Co., Ltd. All rights reserved.

No part of this Owner’s Manual may be reproduced, transmitted, disseminated or transcribed, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this Owner’s Manual or any revision hereto is strictly prohibited.

2. Important

Positioning the TV

• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
• Make sure to hold the upper and bottom frames of the Unit firmly as illustrated.
• Install the Unit in a horizontal and stable position.
• Do not install the Unit in direct sunlight or in a place subject to dust or strong vibration.
• Depending on the environment, the temperature of this Unit may increase slightly. This is not a malfunction.
• Avoid a place with drastic temperature changes.
• Do not place anything directly on top or bottom of the Unit.
• Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the Unit is placed too close to them. In this case, please ensure enough space between the external devices and the Unit.
• Do not insert the AC power cord into the power socket outlet before all the connections are made.
• Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power.
• Before you move the TV, disconnect attached cables to prevent damage to connectors.
• Be sure to unplug the AC power cord from the AC outlet before moving or carrying the Unit.

Regulatory Notices

Do not place the Unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling Unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
Press to turn the Unit on and go into standby mode.
To completely turn off the Unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the Unit off when trouble is found or not in use. The AC plug shall remain readily available.

Never use a gas duster on this TV.
The gas trapped inside of this Unit may cause ignition and explosion.

CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death.

Environmental Care

The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the packaging.
For product recycling information, please visit – www.magnavox.com

Click on

End of Life Directives
MagnaMagnavvoox pax pays a lot of attention to produce enys a lot of attention to produce environmental-frvironmental-friendliendlyy products in green fproducts in green focal areas.ocal areas. YYour new our new TV contains materTV contains materials whichials which can be recycled and reused.can be recycled and reused. At the end of its lifAt the end of its lifee,, specializ specializeded companies can dismantle the discarded companies can dismantle the discarded TV to concentrTV to concentrate theate the reusabreusable materle materials and to minimizials and to minimize the amount of matere the amount of materials to beials to be disposed of.disposed of. Please ensure y Please ensure you dispose of you dispose of your old our old TV according toTV according to local regulations.local regulations.

Disposal of Used Batteries
The Batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas Batteries may not be disposed of with your household waste. Please ensure you dispose of Batteries according to local Regulations.

Preparing to Move/Ship the Unit

Please pack the Unit properly by following the Diagram on the Carton.

To avoid damage to the Screen, do not pack the stand on the same side as the TV screen.

3. Getting Started

Features

• DTV / Analog TV / CATV
  You can use your Remote Control to select channels which are Broadcast in Digital format and conventional Analog format. Also, Cable and Satellite subscribers can access their TV channels.

• Information display
  You can display on the TV screen the Title, contents (DTV only) and other information on the current Program.

• Autoprogram
  This Unit Automatically scans and memorizes channels available in your area, Eliminating  difficult Setup procedures.

• Child lock
  This feature allows you to Block children’s access to inappropriate Programs.

• Closed Caption decoder
  Built-in Closed Caption decoder displays text for Closed Caption supported Programs.

• MTS / SAP tuner
  Audio can be selected from the Remote Control.

• Auto Standby
  If there is no Input Signal and no operation for 15 minutes, the Unit will go into Standby mode Automatically.

• Sleep Timer
  You can set the Unit to go into Standby mode after a specific amount of time.

• Choices for On-screen language
  Select your On-screen language: English, Spanish or French.

• Stereo sound function

• PLL frequency synthesized tuning
  Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” keys on the Remote Control.

• Various adjustments for Picture and Sound
  Customizes picture quality suitable for your room and sets your sound preference.

• fun-Link via HDMI link
  fun-Link allows your other HDMI link Devices to be controlled by the HDMI cable connected to your TV.

• HDMI Input

• HDMI-DVI Input
  If your Video Device has a DVI Output jack, use an HDMI-DVI Conversion Cable to connect the Unit.

• Component Video Input

• PC Input
  Input from a Computer.

• AV Input
  Audio and Video Input from an External Device.

• USB terminal
  The Picture (JPEG) and Video (Motion JPEG) files stored on a USB Memory Stick can be played back on this Unit.

• Digital Audio Output
  Digital Audio (Supporting Dolby Digital) sent to Home Theaters and other Digital Audio systems.

• Headphone Audio Output Headphone 3.5mm Stereo jack for personal listening.

Supplied Accessories

• 55ME314V / 50ME314V / 40ME314V / 40ME324V only.

Note(s)

• If you lose the Screws, please purchase the above-mentioned Phillips head Screws at your local store.

•  If you need to replace these accessories, please refer to the Part Name with the illustrations and call our toll free customer support line found on the cover of this Owner’s Manual.
  When using a Universal Remote Control to operate this Unit.

• Make sure the component code on your Universal Remote Control is set to our brand.
  Refer to the instruction book accompanying your Remote Control for more details.

• We Do Not guarantee 100% interoperability with All Universal Remote Controls.

Symbols used in this Owner’s Manual
The following is the description for the symbols used in this Owner’s Manual. Description refers to:

Digital TV Operation

Cable / NTSC (Analog) TV Operation

• If neither symbol appears, the operation is applicable to both

Stand Assembly

Managing cables

(55ME314V / 50ME314V / 40ME314V / 40ME324V)
Route your Antenna cable and all other cables through the cable management tie at the back of the TV.
The holder helps keep your cables tidy and easily manageable.

Installing the Remote Control Batteries

Remote Control

Control Panel

Connecting the Antenna, Cable or Satellite

Plugging in the AC Power Cord

Make sure All the Necessary Connections are made before the AC Power Cord is plugged into an AC outlet.

Caution(s)

• Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage of this Unit (120V AC).
• Connecting the AC Power Cord to a Power Supply outside of this range may result in Unit failure, degradation or electrical shock.

Note(s)

• Each time you plug in the AC Power Cord, no operations will be performed for several

No supplied cables are used with these connections:

• Please purchase the Necessary Cables at your local store.

Before you connect the AC Power Cord:
Be sure other Devices are connected properly before plugging in the AC Power Cord.

Selecting your Connection quality

Connecting your Devices

PC Connection

These Operations are accessible by Remote Control.
Some may also be accessible by the Main Unit’s Control Panel

Initial Setup

4. Use your TV

Switching on your TV and putting it in Standby mode

Watching Channels from an External Device

fun-Link options

TV Screen information

You can display the currently selected channel or other information such as the aspect ratio on the TV screen.
In the Digital mode, the detailed broadcasting information for the current off the air channel, such as Program title, are displayed

5. Making more use with your TV

This section describes the overview of the Main Menu displayed whenyou press MENU.
The Main Menu consists of the function setting items below.

Displaying the Main Menu

Picture

Sound

Setup

Add channels

Cable / NTSC (Analog) TV Operation

Note(s)
● Closed Caption will NOT be displayed when you are using an HDMI Connection.
● Digital caption service that you can switch differs depending on the broadcast description.
● Caption style will not have any effect if the User setting is set to Off.
● The captions do not always use correct spelling and grammar.
● Not all TV Programs and product commercials include Closed Caption information or All types of the Closed Captioning. Refer to your area TV Program listings for the TV channels and times of Closed Caption shows. The captioned programs are usually noted in the TV listings with abbreviations such as CC.
● To show the Closed Caption on your TV screen, Broadcast signal must contain the Closed Caption data.
● Captions and texts may not exactly match the TV voice.
● Changing channels may delay the Closed Caption for a few seconds.
● Adjusting or muting the volume may delay the Closed Caption for a few seconds.
● Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a malfunction.
● The caption or text characters will not be displayed while the main menu or functions  display is shown.
● If a black box appears on the TV screen, this means that the Closed Caption is set to the text mode. To clear the box, select CC-1, CC-2, CC-3, or CC-4.
Refer to Caption Settings: L p. 25
● If the Unit receives poor quality television signals (mainly when the Analog (NTSC) is received), the captions may contain Errors or there might be no captions at all. Some possible causes of poor quality signals are:
– Automobile ignition noise
– Electric motor noise
– Weak signal reception
– Multiplex signal reception (ghosts or screen flutter)
– Data dropout and Pixelation (for DTV only)
● The Unit retains the Closed Caption setting if the Power fails.
● When the Unit receives special effects Playback signal (e.g. Search, Slow and Still) from a VCR’s Video Output channel (ch3 or ch4), the Unit may not display the correct caption or text.
● The EUT setting that satisfies § 79.102 (e) is as follows:
– Font: Mono-font
– Character Size: Large

Child and Ratings Lock

Setting US Movie and TV Ratings

Canadian English or Canadian French Ratings

fun-Link (HDMI CEC)

Setting your Location to Home

You can set the Location of your TV to Home or Retail. Choosing Home gives you full flexibility to change predefined settings for Picture and Sound.

Language

USB

Your TV is fitted with a USB Connection that enables you to view JPEG photos or watch Motion JPEG files stored on a USB Memory Stick.

6 Upgrade your TV Software

MAGNAVOX continuously tries to improve its products and we strongly recommend that you Upgrade the TV Software when Upgrades are available.
New Software can be Downloaded from our website at www.magnavox.com/support/download
using the model number of your TV to find information.

Checking your Current Software version

7. Useful tips

FAQ

Troubleshooting

If the Unit does not perform properly when operated as instructed in this Owner’s Manual, check the following Troubleshooting Tips and All Connections Once before calling for Service.

8. Information

Glossary

Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards.
Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA.

Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).

CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices with CEC feature and this Unit. We Do Not guarantee 100% interoperability with other brands of CEC compliant devices.

Component Video
This is a Video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital
The system developed by Dolby Laboratories to compress Digital sound.
It offers Stereo Sound (2ch) or multi-channel Audio.

DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards.

E-sticker
E-sticker is showing set features, technical information, etc on this TV set that is displayed on the TV screen mainly used by TV retailers. Previously the information was on a printed sticker that was put on the display.

HDMI (High-Definition Multimedia Interface)
Interface that supports All uncompressed, Digital Audio / Video formats including Set-top Box, Blu-ray / DVD Recorder or Digital television, over a single cable.

HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture quality.

PIN code
A stored 4-digit number that allows access to Parental control features.

SAP (Secondary Audio Program)
Second-Audio channel delivered separately from the Main-Audio channel.
This Audio channel is used as an alternate in bilingual broadcasting.

SDTV (Standard Definition TV)
Standard Digital format that is similar to the Analog TV picture quality.

Maintenance

Cabinet Cleaning

● Wipe the front panel and other exterior surfaces of the Unit with a soft cloth.
● Never use a solvent or alcohol. Do Not spray insecticide liquid near the Unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning
Wipe the panel of the Unit with a soft cloth. Before cleaning the panel, disconnect the AC Power Cord.

Servicing
Should your Unit become inoperative, Do Not try to correct the problem yourself. There are no user serviceable parts inside. Call our toll free customer support line found on the cover of this Owner’s Manual to locate an Authorized Service Center.

IR Signal Check
If the Remote Control is not working properly, you can use a Digital or Cell Phone Camera to see if it is sending out an infrared signal.

e.g.) With a Digital Camera:
Point the Digital Camera towards the Remote Control infrared diode at the front of the Remote Control. Press any key on the Remote Control and look at the Camera Display. If an infrared pulsating light appears on the Display, the Remote Control is sending out an IR signal.

Note: Some Cameras have an IR Filter and will not Display the IR signal.

9. Specifications

10. Warranty

LIMITED WARRANTY

ONE (1) YEAR PARTS AND LABOR

WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth below.

WHO IS COVERED:
This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:
This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a new or refurbished product at company’s option.
Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes company property. When a refund is given, your product becomes company property.
Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED – EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than company approved Authorized Service Location, (c) to a product or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping costs for returning defective product.

• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company.

• Damage or claims for products not being available for use, or for lost data or lost software.

• Damage from mishandled shipments or transit accidents when returning product.

• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.

• A product used for commercial or institutional purposes
  (including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 341 3738

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501

FUNAI CORPORATION, Inc.
19900 Van Ness Avenue, Torrance, CA 90501

FAQ

Q: Where can I get immediate assistance?

A: For immediate assistance, visit www.magnavox.com/support or call 1-866-341-3738.

Q: How can I register my product online?

A: Register your product online at www.magnavox.com/support.

Q: How can I dispose of the TV and its accessories responsibly?

A: Follow proper environmental care guidelines and dispose of the TV and its accessories responsibly to minimize the impact on the environment.

Q: How do I adjust the picture and sound settings on my TV?

A: To adjust picture and sound settings, access the TV’s main menu, navigate to the “Picture” or “Sound” section, and make the desired adjustments.

Q: How do I connect external devices to my TV?

A: Connect external devices to your TV using

References

• Manual-Hub.com - Free PDF manuals!
• Manual.to - Streamline Operations with Digital Work Instructions
• prev.ch is available for purchase - Sedo.com
• Parked
• Creative Studio and Sound Design | London - UNIT
• AntennaWeb - Antenna Signal Prediction
• The FreeType Project
• you.So
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>