LANDMANN 21860 Bromley Diamond Fire Pit Black Instruction Manual
- June 16, 2024
- LANDMANN
Table of Contents
LANDMANN 21860 Bromley Diamond Fire Pit Black
Product Information
Specifications
- Model: 21860 21861 21862 21863 21864 21865
- Assembly time: 15 minutes
Parts List
- (1) Spark Guard
- (1) Spark Guard Handle
- (1) Firebowl
- (4) M6 x 30MM Bolts
- (4) Legs
- (1) Support Ring
- (4) M6 x 20MM Bolts
- (6) M6 x 12MM Bolts
- (1) Poker
- (14) M6 Flange Hexnut
Product Usage Instructions
Step 1 : Assemble the Legs
Take the (4) legs [ E ] and assemble them to the fire bowl [ C ] as shown using (4) 30MM bolts [ J ], (4) 12MM bolts [ S ], and (8) hex nuts [ Z ]. Tighten securely with an adjustable wrench.
Step 2: Assemble the Support Ring
[Instructions for assembling the support ring]
Step 3: Assemble the Spark Guard Handle and Place the Spark Guard
[Instructions for assembling the spark guard handle and placing the spark guard]
Step 4: Add Sand
IMPORTANT! Add 5 lbs of sand to the bottom of the fire bowl.
FAQ
Q: Can I burn wood or charcoal inside enclosed areas?
A: No, burning wood or charcoal inside homes, vehicles, tents, or any other enclosed areas can produce carbon monoxide, which has no odour and can cause death.
Q: Where can I find available accessories for the Bromley fire pit?
A: You can visit our website at www.landmann-usa.com or call customer service toll-free at 1-800-321-3473.
SAFE OPERATION
READ FIRST! RULES FOR BROMLEY FIRE PIT SAFE OPERATION.
- THIS OUTDOOR FIRE PIT IS FOR OUTDOOR USE ONLY!
- USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES!
- DO NOT USE ON LAWNS, WOODEN DECKS OR ASPHALT!
- KEEP THE OUTDOOR FIRE PIT A MINIMUM OF 10 FT. AWAY FROM BUILDINGS, STRUCTURES, ANY FLAMMABLE ITEMS AND VEHICLES.
- NEVER USE UNDER LOW-HANGING TREE BRANCHES, TRELLIS, OR OVERHANGS OF ANY KIND INCLUDING COVERED PORCHES.
- WARNING! NEVER USE GASOLINE, ALCOHOL OR VOLATILE FLUIDS TO START OR RESTART FIRES.
- FOR LONGER PRODUCT LIFE, KEEP FIRES TO A RESPECTABLE SIZE, DO NOT OVERLOAD.
- THE OUTDOOR FIRE PIT IS FOR ADULT USE ONLY.
- DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
- DO NOT MOVE THE FIRE PIT DURING USE.
- DO NOT USE IN WINDY CONDITIONS!
- DO NOT OVERLOAD OR USE FOR BURNING GARBAGE.
- USE CAUTION WHEN TENDING THE FIRE, AS SURFACES WILL BECOME VERY HOT WHILE IN USE.
- USE MITTENS OR GLOVES WITH THE POKER TO REMOVE THE SPARK GUARD,
- THE SPARK GUARD WILL BECOME VERY HOT!!
- USE CAUTION WHEN REMOVING THE SPARK GUARD, AS HOT STEAM OR A FLARE-UP COULD CAUSE BURNS.
- BEFORE EACH USE MAKE SURE THE OUTDOOR FIRE PIT IS IN GOOD WORKING CONDITION.
- USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED, SURFACES WILL REMAIN HOT FOR SOME TIME.
- THE OUTDOOR FIRE PIT MUST BE COMPLETELY COOLED OFF AND ALL EMBERS MUST BE EXTINGUISHED BEFORE ANY COVER CAN BE USED.
ASSEMBLY INSTRUCTIONS
FIRE PIT ASSEMBLY INSTRUCTIONS
A Phillips or plain screwdriver and an adjustable wrench are needed for assembly.
Assembly time: 15 minutes
- STEP 1 : ASSEMBLE THE LEGS Take the (4) legs [ E ] and assemble them to the firebowl [ C ] as shown using (4) 30MM bolts [ J ], (4) 12MM bolts [ S ] and (8) hex nuts [ Z ]. Tighten securely with the adjustable wrench.
- STEP 2: ASSEMBLE THE SUPPORT RING Place the support ring [ Q ] on top of the leg [ E ] tabs and assemble using (4) 20MM bolts [ R ] and (4) hex nuts [ Z ]. Tighten securely with an adjustable wrench.
- STEP 3: ASSEMBLE SPARK GUARD HANDLE AND PLACE SPARK GUARD Assemble the spark guard handle [ W ] using (2) 12MM bolts [ S ] and (2) hex nuts [ Z ]. Place the spark guard [ AA ] onto the bolts [ J ]. The spark guard keeps sparks contained in the fire pit. PLEASE USE at all times
- STEP 4: ADD SAND Before using, add a 1-1.5 in. layer of sand or about 5 lbs. (size-wise, its the same amount as a 5 lb. bag of sugar) to the bottom of the fire bowl. This will help against the corrosive nature of the ashes and help radiate the heat upwards.
WARNING!
CARBON MONOXIDE HAZARD! BURNING WOOD OR CHARCOAL PRODUCES CARBON MONOXIDE, WHICH HAS NO ODOR AND CAN CAUSE DEATH IF BURNED IN ENCLOSED AREAS. NEVER BURN WOOD OR CHARCOAL INSIDE HOMES, VEHICLES, TENTS OR ANY OTHER ENCLOSED AREAS
IMPORTANT
ADD 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL.
HELPFUL HINTS
- ADDING 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL WILL EXTEND THE FIREBOWL LIFE.
- KEEP THE FIRE PIT OUT OF THE WEATHER AND ELEMENTS.
- STORE THE FIRE PIT IN A DRY LOCATION OUT OF THE WEATHER.
- DO NOT LET THE FIREBOWL FILL WITH WATER.
- DO NOT DUMP ASHES WHERE A FIRE CAN BE STARTED.
- DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.
- USE ANY COVER ONLY AFTER THE FIRE PIT IS COMPLETELY COOL TO THE TOUCH.
WARNING!
NEVER USE GASOLINE, ALCOHOL OR VOLATILE FLUIDS TO START OR RESTART FIRES.
AVAILABLE ACCESSORIES FOR THE BROMLEY
These custom-made accessories are made just for the Bromley Fire Pit.
-
COVER
MODEL 29495 -
MULTI-PURPOSE POKER
MODEL 29240 -
COOKING GRATE
MODEL 29200
WARNING!
HOT SURFACES DURING USE! USE MITTENS, POKER OR GLOVES ON THESE PARTS
Congratulations on your purchase of the Bromley Fire Pit! At Landmann USA, we strive to provide you with an easy-to-use, easy-to-assemble product. However, in the unlikely event your package should have a missing or defective part, please contact us at:
contact
-
customerservice@landmann-usa.com
1-800-321-3473 M-F 8-5 ET. -
Please visit our website at: www.landmann-usa.com
-
Call customer service toll-free at 1-800-321-3473
Proof of purchase may be required. Thank you!
Landmann® Limited Distributed by Landmann® USA www.landmann-usa.com Made in China © 2014 Landmann® USA
References
- USA Location information - USA.com
- Your World of BBQ › LANDMANN USA
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>