SENCOR SEP 540 BT Wireless Earpods with a Microphone User Manual
- June 16, 2024
- SENCOR
Table of Contents
SENCOR SEP 540 BT Wireless Earpods with a Microphone User Manual
Supply content
- “L” and “R” earphone
- Charging case
- User’s manual
- USB-C charging cable
SEP 540 BT Bluetooth earphones description
- Earphone touch pad
- Microphone and earphone charging contacts
- Earphone LED indicator
- Earphone charging contacts in the case
- Charging case LED indicator
- USB-C charging connector
R Right earphone
L Left earphone
Left and right earphone function
Long touch – turn off/on the earphone
1 x long touch (2 seconds) during an incoming call – call rejection
1 x short touch during an incoming call – answer the call
1 x short touch during an ongoing call – end call
1 x short touch – play function
1 x short touch – pause function
3 x short touch – launch SIRI/Google assistant
Left earphone
Long touch in music mode – reduce volume by one level
2 x short touch – previous track
Right earphone
Long touch in music mode – increase volume by one level
2 x short touch – next track
Putting into operation
Before first use, be sure to read the safety instructions contained in this
user’s manual carefully.
Before using the earphones for the first time, put the earphones in the
charging case and connect the charging adapter. Wait until the charging case
and earphones are fully charged.
Turning on the earphones Taking the earphones out of the case will
automatically switch them on. When the earphones are in the off state outside
the charging case. Press and hold the touch pad on each earphone and wait for
the earphones to switch on.
Turning off the earphones – Inserting the earphones into the charging case
will automatically turn off the earphones. Long press and hold the touch pad
of the earphones until the earphones turn off.
Pairing the earphones with each other – The earphones are already paired from
the factory and do not need to be paired with each other. (If pairing to TWS
mode fails, return the earphones to the charging case and repeat the above
instructions).
Warning: To prevent damage to your hearing, always keep the vo- lume
level of your device to a minimum before connecting BT ear- phones to your
mobile device. Keep the touch pad clean and avoid touching other objects or
body parts such as hair.
Note: If the BT earphones are not paired with any device, they will turn
off when left idle for a long time. Put them in the case.
Pairing your earphones via Bluetooth
To pair the BT earphones with your mobile device, do the following: Remove the
earphones from the charging case (blue and red intermi- ttent earphone
indication) and look for the Bluetooth earphone name “SEP 540BT” in the device
you want to pair and start the pairing process. Always perform the pairing
process when both earphones are removed from the charging case. If you are
requested to enter a pairing code while your device and the BT earphones are
pairing, use the following code: “0000”.
To cancel the pairing process, disconnect the BT earphones from your mobile
device (cancel the Bluetooth pairing).
Remark : To ensure a stable Bluetooth connection, make sure that the
distance between the BT earphones and your paired device is kept within 10
meters. Depending on ambient interference, in some cases it may be necessary
to maintain a shorter distance between the BT earphones and the paired
device.
Charging
A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. When the BT earphones are placed in the charging case, the led indicators show:
a. The blue continuous indication of the earphones indicates charging.
b. When the USB-C charging cable is connected, the intermittent orange
indication shows the charging of the charging case. A fully charged charging
case indicated by an orange solid indication.
Attention: For charging, use only the original accessories supplied with
the appliance. To achieve maximum battery life, it is advisable to start
charging the battery only when the battery is low (10%-20%). Charge
continuously until fully charged.
Recommendation: If your earphones are not to be used for an ex- tended
period of time, we recommend to fully charge the batteries once every two to
three months. We recommend to store the BT earphones and the charging box with
the battery charged to prevent irreparable damage to the battery (loss of
capacity).
Specification
Bluetooth Version: 5.0
Bluetooth Profile : HSP, HFP, A2DP, AVRCP
Speaker Diameter: 13mm X 2pcs
Impedance: 32 Q±10%
Frequency range : 20 Hz – 20 kHz
Sensitivity: 120d B±3 dB/1mW (S.P.Lat 1 KHz)
Microphone Sensitivity: -38dB±3dB
Earbud Battery: 3.7V, 25mAh Li-po Battery
Base Battery: 230m Ah Li-po Battery
Earbud Continuous Playing time: 3 hrs per full charged
Charging time: 1.5 hrs for Base, ≈1.5 hrs for Earbuds
Charging Port: Type-C
Safety Notice
Please observe the rules of the Country or Region which you are in while
driving.
Do not disassemble or modify the headset at any reason, otherwise, It may
damage or burn the headset.
If there is any quality problem, please send headset to authorized service
center for repairing.
Please keep the equipment along with all the accessories out of the reach of
children and pets.
Extreme temperatures will cause the device deformation, reduce the charging
capacity and shorten the working life.
Please do not immerse the earphone into water. Guarantee will be lost if
damage is caused by immersed into water.
It will damage your hearing if you listen with high volume for a long time. It
is recommended that only use the lowest volume which is necessary for speak-
ing and listening to music.
Instructions and information regarding the disposal of used packaging
materials
Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances.
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electro- nic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative im pact on the envi- ronment and human health, which could be caused as a result of improper liquidati- on of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from local government departments or from
your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST ČR, a.s. declares that the radio equipment type SEP 540 BT is in com- pliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.sencor.eu
Manufacturer: FAST CR, a.s. U Sanitasu 1621 25101 Ricany Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>