waterpik WP-881 Toothbrush Heads Replacement User Manual
- June 16, 2024
- Waterpik
Table of Contents
waterpik WP-881 Toothbrush Heads Replacement
Product Information
Specifications:
- Model: WP-860/861/862/871/872/881/882
- Compatible Voltage: 120 VAC, 60Hz
Product Usage Instructions
First Use:
Review the full instruction book prior to first use.
Start Water Flossing:
- Fill the reservoir with warm water and firmly replace it on the base.
- Turn the pressure to high, point the tip into the sink, and turn on the power and water switches until water flows. Then turn off.
- To avoid mess: Place the tip in your mouth before turning the unit on.
- Turn on the power and water. Start on low pressure and increase to your liking.
- Insert the tip firmly until it clicks into place.
Lean Over Sink:
Lean over the sink and close your lips enough to prevent splashing, while still allowing water to flow from your mouth into the sink.
Technique:
Follow the technique demonstrated in the provided “How To” video for effective water flossing.
How To Video:
For a visual demonstration of the proper technique, visit waterpik.com/vid860.
Frequently Asked Questions (FAQ):
Q: What is the compatible voltage for this device?
A: This device is only compatible with voltages of 120 VAC, 60Hz.
QUICK START INSTRUCTION
Review full instruction book prior to first use
- FIRST USE
- Fill reservoir with warm water and replace it firmly on the base.
- Insert tip firmly until it clicks into place\
- Turn pressure to high, point tip into sink, turn power and water switches on until water flows. Then turn off
- START WATER FLOSSING
- TO AVOID MESS: PLACE THE TIP IN YOUR MOUTH BEFORE TURNING UNIT ON
- Turn power and water on. Start on low pressure and increase to your liking
- LEAN OVER SINK
- Close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink
- TECHNIQUE
- Aim water at the gumline at a 90° angle. Follow the gumline and pause briefly between teeth
- HOW TO VIDEO
- Visit waterpik.com/vid860
- Register your product and receive over $50 in savings. waterpik.com/registration
Model WP -860/861/862/871/872/881/882
This device is only compatible with voltages of 120 VAC, 60Hz
© 2017 Water Pik, Inc.
1.800.525.2774 (USA)