waterpik WF-02 Cordless Water Flosser User Guide
- June 16, 2024
- Waterpik
Table of Contents
Waterpik WF-02 Cordless Water Flosser
Product Information
Specifications
- Model: WF-02
- Battery: 3 AA batteries (included)
Product Usage Instructions
First Use
- Remove the reservoir.
- To remove the battery door, twist and pull.
- Insert 3 AA batteries into the battery compartment.
- To avoid mess, place the tip in your mouth before turning the unit on.
- To replace the battery door, line up the arrows, push, and twist.
- Insert the tip firmly until it clicks into place.
- Fill the reservoir with warm water.
Start Water Flossing
- Slide the power switch to the low (l) or high (ll) position. Start with the lowest setting and increase to your liking.
Lean Over Sink
- Close your lips enough to prevent splashing, while still allowing water to flow from your mouth into the sink.
Technique
- Aim the water just above the gumline at a 90-degree angle.
- Follow the gumline and pause briefly between teeth.
How to Video
Visit waterpik.com/vid02 for a video guide on how to use the product.
Product Registration
Register your product at waterpik.com/registration to receive over $50 in savings.
Frequently Asked Questions (FAQ)
How do I replace the batteries?
To replace the batteries, twist and pull the battery door, insert 3 AA batteries, and then line up the arrows and push to replace the battery door.
Can I use mouthwash instead of water?
No, it is recommended to use warm water only.
What is the purpose of leaning over the sink?
Leaning over the sink helps prevent splashing while allowing the water to flow out of your mouth into the sink.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>