Wharfedale Pro SVP-18B Professional Speaker User Manual
- June 16, 2024
- Wharfedale Pro
Table of Contents
Wharfedale Pro SVP-18B Professional Speaker
Product Information
Specifications:
- Model name: SVP-10
- Frequency Response: 65-20kHz
- Coverage: 90 X 60 degrees
- Power Handling: 100 Watts continuous, 200 Watts peak
- Sensitivity: 96dB (1W@1M)
- Peak SPL: 121.5dB
- System Impedance: 8 Ohms
- LF Driver Size: 10 inches
- HF Driver Size: 1.5 inches
- HF Coil Size: 25mm/1 inch
- Exit Size: 30mm/1.2 inches
- HF Protection: No
- HF Horn: Bulb Elliptical
- Crossover Frequency: 3.2kHz
- Cabinet Type: Trapezoid
- Finish: Carpet/Black
- Color: Black
- Stand Adaptor: Yes
- Protect Corner: Black metal
- Input Connector: 2 x 1/4 phone
- Dimensions (H x W x D): 494 x 317 x 288 mm
- Weight: 10.28 kg
Product Usage Instructions:
Safety Instructions
Before operating the product, please read and follow these safety
instructions:
- Read the instructions carefully before operating the product.
- Retain these instructions for future reference.
- Comply with all warnings and instructions provided for this product.
- Never use shielded or microphone cable for speaker connection as it may not handle the amplifier load properly and could cause damage to the system.
- Use caution when placing and operating the loudspeaker systems to avoid exposure to excessive sound pressure levels that can cause permanent hearing damage.
- Do not attempt to service the product yourself. Seek professional servicing if needed.
Product Description
The SVP series professional speakers are designed for high-quality reproduction of voice, music, and musical instruments in mobile or fixed installations. The SVP-15B and SVP-18B subwoofers provide extended bass response in a multi-way equalized system. All cabinets are covered in tough impact-resistant carpet and are designed for portability. They feature heavy- duty handles and a kick-proof steel protective grille. The SVP-18B and SVP-15B subwoofers have two 1/4 phone type jack sockets and are paralleled at the rear of each cabinet.
Frequently Asked Questions (FAQ)
-
Q: What is the frequency response of the SVP-12?
The frequency response of the SVP-12 is 50-20kHz. -
Q: What is the power handling of the SVP-215?
The SVP-215 has a power handling capacity of 600 Watts continuous and 1200 Watts peak. -
Q: Can I use shielded or microphone cable for speaker connection?
No, it is not recommended to use shielded or microphone cable for speaker connection as it may not handle the amplifier load properly and could cause damage to the system. -
Q: Can I service the product myself?
No, the user should not attempt to service the product. Seek professional servicing if needed.Wharfedale International Limited, IAG House, Sovereign Court,Ermine Business Park, Huntingdon, Cambs, PE29 6XU England
WHARFEDALE website: www.wharfedalepro.com SVP SERIES PROFESSIONAL SPEAKER USER MANUAL
WARNING & SAFETY INSTRUCTIONS
- READ INSTRUCTIONS carefully before operating this product.
- RETAIN these instructions.
- COMPLY WITH WARNINGS – All warnings and instructions for this product should be adhered to.
- USE WITH AMPLIFIERS – To avoid damage, it is advisable to establish and follow a pattern for turning on and off any sound system. With all system parts connected, turn on source equipment, tape decks, instruments, mixers, signal processors etc., BEFORE turning on your power amplifier. Many products output turn on and turn off transients that can damage speakers. By turning on your power amplifier LAST and making sure the amplifier’s input controls are at minimum any transients “upstream” of the amplifier are not amplified and passed to the speaker. Wait until all system parts have stabilized, then bring up amplifier controls to the operating level. This should take no more than a few seconds. Similarly when shutting systems down, always turn down amplifier input controls and then turn off your amplifier BEFORE shutting down other components. Professional amplifiers often feature delayed turn-on/off circuits to perform these functions for you automatically.
- CABLES – Never use a shielded or microphone cable for any speaker connection as this will not be heavy enough to handle the amplifier load and could cause damage to the complete system.
- RIGGING • SUSPENDING • MOUNTING The rigging, suspension or mounting of this speaker system can expose members of the public to serious health risks and even death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE, AND NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.
- CAUTION: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage.
- SERVICING – The user should not attempt to service this product.
Wharfedale Pro SVP Series of Professional Sound Reinforcement Loudspeakers
- Reliable, Durable construction
- Proprietary designed, high efficiency, high power Wharfedale Professional drive units.
- Protective grills
- Integral High-Frequency Driver Overload protection “PRO-TECH”™
- Sophisticated crossover design enables smooth power and frequency response control through the crossover region
- Trapezoid shape for arraying cabinets
- Integral tripod stand adaptor
- Low resonance enclosure design
- Full range and complimentary Sub Bass systems
- Exceptional sound quality, with broad bandwidth and dynamic range
- High Power Handling
- Metal corner protectors
Unpacking
All Wharfedale Pro products are fully checked before leaving the factory. After unpacking please inspect the cabinets for any physical damage. Please retain the shipping carton if possible and internal packing material in case the unit needs to be returned. Please check as soon as possible the unit is functioning. In the event of any damage please contact your dealer immediately so that a written claim for damages can be made.
Wharfedale Pro Limited Warranty
Wharfedale Pro SVP Series loudspeaker systems are warranted to be clear of
manufacturing or materials defects for one year from the original date of
purchase. In the event of a malfunction, contact your authorized Wharfedale
Professional dealer or distributor for information.
A distributor list can be found at
www.wharfedalepro.com
*Be aware that warranty details may differ from country to country. Contact your dealer or distributor for information. These terms do not infringe on your statutory rights.
Operating
The Wharfedale Pro SVP-10, SVP-12, SVP15, and SVP-215 feature two 1/4” phone
jack socket connectors and are parallel. This means that these cabinets can be
linked together with other cabinets of the same impedance and design or with a
sub-bass unit.
CAUTION: If you are unsure of any of these procedures, check with your
dealer or an experienced sound engineer.
-
Ensure you do not overload the amplifier you are using by linking too many units together and lowering the resistance (impedance) below the safe operating level of the amplifier.
Note: Each speaker connected in parallel increases the load on the amplifier and can add up to a total load that may exceed the amplifier’s capabilities, leading to possible damage. Two 8Ω loudspeakers in parallel make a 4Ω total load. Four 8Ω parallel connected loudspeakers make a total load of 2Ω, which is too low for many amplifiers. -
Make sure that the speaker cable used is securely attached to the amplifier and the cabinet.
-
Check all cables from the source unit (mixer or other source) to the amplifier. Check all power cables to all the electronic systems powering the loudspeakers and ensure that they meet with required safety standards.
SPECIFICATION
Model name| SVP- 10| SVP- 12| SVP- 12M|
SVP- 15| SVP- 215| SVP- 15B| SVP- 18B
---|---|---|---|---|---|---|---
FREQ RESP +/- 3 DB| 65-20kHz| 50-20kHz| 50 – 20kHz| 45-20kHz| 40-20kHz|
45-250Hz| 40-250Hz
COVERAGE (H X V)| 90 X 60| 90 X 60| 90 X 60| 90 X 60| 90 X 60| |
POWER HANDLING (Watts)| | | | | | |
Continuous| 100| 150| 150| 200| 250| 250| 300
Music| 200| 300| 300| 400| 500| 500| 600
peak| 400| 600| 600| 800| 1000| 1000| 1200
SENSITIVITY 1W@1M| 96dB| 97dB| 97dB| 98dB| 101dB| 98dB| 99dB
PEAK SPL
SYSTEM IMPEDANCE
| 121.5dB
8W
| 124.5dB
8W
| 124.5dB
8W
| 126dB
8W
| 129.5dB
4W
| 126.5dB
8W
| 129.5dB
8W
L F DRIVER SIZE| | | | | | |
Driver size| 10”| 12”| 12”| 15”| 15”| 15”| 18”
Coil Size (mm/ins)| 39/1.5”| 51/2”| 51/2”| 51/2”| 38/1.5”| 65/2.5”| 75/3”
HF SECTION| | | | | | |
Coil Size (mm/ins)| 25 / 1”| 25 / 1”| 25 / 1”| 25 / 1”| 25 / 1”| –| –
Exit Size (mm/ins)| 30/1.2”| 30/1.2”| 30/1.2”| 30/1.2”| 30/1.2”| –| –
HF Protection| Bulb| Bulb| Bulb| Bulb| Bulb| –| –
HF HORN| Elliptical| Elliptical| Elliptical| Elliptical| Elliptical| –|
–
CROSSOVER SECTION:| | | | | | |
Crossover frequency
High Pass Out
| 3.2k
No
| 3.2k
No
| 3.2k
No
| 3.2k
No
| 3.2k
No
| 150Hz/6dB
150Hz/6dB
| 150Hz/6dB
150Hz/6dB
ENCLOSURE TYPE| | | | | | |
Shape| Trapezoid| Trapezoid| Floor monitor| Trapezoid| Trapezoid| Rectangular|
Rectangular
Finish Colour| Carpet/Black| Carpet/Black| Carpet/Black| Carpet/Black|
Carpet/Black| Carpet/Black| Carpet/Black
Stand Adaptor| Yes| Yes| No| Yes| No| Yes| Yes
Protect Corner| Black metal| Black metal| Black metal| Black metal| Black
metal| Black metal| Black metal
Handle| 2| 2| 2| 2| 2| 2| 2
INPUT CONNECTOR| 2 x 1⁄4”phone| 2 x 1⁄4” phone| 2 x 1⁄4” phone| 2 x 1⁄4”
phone| 2 x 1⁄4” phone| 2 x 1⁄4” phone| 2 x 1⁄4” phone
HIGH PASS OUT| No| No| No| No| No| 1⁄4” phone| 1⁄4” phone
DIMENSIONS (H x W x D)| 494 x 317 x 288| 554 x 428 x 355| 415 x 248 x
554| 638 x 463 x 390| 1014 x 463 x 390| 587 x 548 x 429| 748 x 548 x 450
WEIGHT| 10.28kg| 15.58kg| 14.9kg| 19.26kg| 31.0kg| 31.52kg| 38.56kg
Application
For extended bass response in a multi-way (2 or more) equalized system
designed for high-quality reproduction of voice, music, and musical
instruments, for mobile or fixed installations.
Description
These cabinets are all covered in tough impact-resistant carpet. They are
designed for portability and are fitted with heavy-duty handles and a ‘kick-
proof’ steel protective grille. The SVP-18B and the SVP- 15B have two 1/4”
phone type jack sockets and are paralleled at the rear of each cabinet. (See
diagram ).
A very special feature of these products is that they have built-in crossovers
with high-pass outputs. This means that you may use one channel of your power
amplifier to power both a subwoofer and a full-range speaker, while
maintaining a reason-able load on your amplifier. The amplifier only sees the
subwoofer/crossover load which is 8 ohms for SVP series subwoofers. Without
the built-in crossover, the combined impedance of full-range and subwoofer
speakers in parallel would be much lower. Also, the high-pass crossover output
removes the very low bass frequencies from the signal going to the full-range
speaker. This prevents distortion (and possible damage) from excessive low-
frequency energy getting into the full-range speaker.
SVP DIMENSIONS
Wharfedale International Limited, IAG House, Sovereign Court, Ermine Business
Park, Huntingdon, Cambs, PE29 6XU England
WHARFEDALE website: www.wharfedalepro.com
IAG Professional reserves the right to alter or improve specifications without
notice. All rights reserved © 2004 Wharfedale Pro. A member of the
International Audio Group.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>