Sandberg 450-03 Bluetooth Link for iPhone Dock User Manual

: June 16, 2024
: Sandberg

Table of Contents

Introduction
Connection
Pairing with Bluetooth devices
Playback music
Specifications:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sandberg 450-03 Bluetooth Link for iPhone Dock

Introduction

With the Sandberg Bluetooth Link for iPhone Dock (referred to as the “receiver”), you can wirelessly connect your tablet PC, mobile phone, PC, iPhone 5 or other audio device with built-in Bluetooth to an iPod/iPhone speaker dock. Simply attach the Sandberg Bluetooth Link for iPhone Dock to the iPod/iPhone socket in your speaker dock, and the music signal is then received wirelessly via Bluetooth. The receiver is powered by the dock via the socket, and is switched on and off together with your dock.

Connection

Simply place the receiver down over the socket in your speaker dock, where you would normally place your iPod/iPhone. The receiver must have the logo facing outwards towards you.

Pairing with Bluetooth devices

If the receiver is not already connected to a Bluetooth device, it is always pairing enabled and does not have to be set to pairing mode in order to connect to a new device.
While the receiver is switched on (and not connected to a previous Bluetooth device), you must have pairing mode activated on the Bluetooth device that you want to connect to the receiver. The procedure for this varies, so check the manual for the device in question for a detailed description of this.

The following guidelines generally apply to the pairing procedure:

Place the receiver and Bluetooth device within a secure range of 2-3 metres.
Activate the pairing function on the Bluetooth device, e.g. “search for Bluetooth devices”.
The name of the receiver will appear on the list with the name “Sandberg Link”.
If you are asked for a password or PIN code, use “0000” (four zeros).
Once the devices are connected, the blue LED in the receiver will flash every 5 seconds.

NB: When pairing is done for the first time, the devices will usually remember each other and connect automatically when they are switched on and within close range. On some mobile phones you have to manually choose to transmit audio playback via Bluetooth. See the phone’s manual for more details.
Each time the receiver is switched on, it will automatically attempt to connect to the last connected device. If you want to connect a different Bluetooth device, turn off the Bluetooth function on the first device. Then follow the pairing instructions for the new device as described above.
If the connection is lost between the devices when you move outside the range, it will automatically reconnect as soon as you move back into the range.
If your Bluetooth device uses Bluetooth version 2.1 or higher, there will be no need for a PIN code when pairing.

Note that your Bluetooth device must support Bluetooth with A2DP/AADP in order to work with this receiver.

Playback music

Once you have completed the above you will now be able to hear the music from your Bluetooth device in the connected speakers, and enjoy the freedom of being able to control the choice of tracks and volume from a distance. Have fun!
If you need further help or assistance with your Sandberg product, you can visit the website http://helpdesk.sandberg.it.

Have fun with your Sandberg Bluetooth Link for iPhone Dock!
Playback music