PHILCO PHSB 610 MJ Blender User Manual

: June 16, 2024
: PHILCO

Table of Contents

PHILCO PHSB 610 MJ Blender
Product Information
Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
DESCRIPTION OF THE BLENDER
BEFORE FIRST USE
USING THE BLENDER
CARE AND CLEANING
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILCO PHSB 610 MJ Blender

Product Information

Product Name: PHILCO Blender PHSB 610 MJ
Manufacturer: PHILCO
Model: PHSB 610 MJ
Revision: 01/2016

Specifications

Measuring cup (A)
Lid (B)
Blending jar (C)
Safety jar locking system (D)
Button for speed I (E)
Button for speed II (F)
Motor unit (G)
Portable jar (H)
Lid of the portable jar (I)
Blade assembly of the portable jar (J)

Usage Instructions

Part 3: Before First Use

Before using the measuring cup, lid, blending jar, portable jar, lid, and blade assembly, it is necessary to follow these steps:

Wash these parts in warm water containing kitchen detergent.
Rinse these parts thoroughly under running water.
Dry thoroughly.

WARNING: The blade assemblies in the portable jar and in the blender jar are very sharp. There is a serious risk of injury. Handle them very carefully.

Safety jar locking system: The appliance has a safety jar locking system that will prevent it from being started unless it is properly assembled.

Part 4: Using the Blender

Using the blending jar (C)

Place the blending jar (C) onto the motor unit (G).
Place the ingredients that you wish to process into the jar.
Put on the lid (B). Make sure that the lid and the measuring cup (A) are properly attached.
Insert the power plug into a power socket.
Select the blending speed by pressing button I (E) or II (F). Hold the blender firmly with both hands.
As soon as the ingredients are properly processed, release the selected speed button and disconnect the power cord from the power socket.
Take the blending jar (C) off the motor unit (G).

Operation with the portable jar (H)

Place the ingredients into the portable jar (H) and then carefully attach the blade assembly (J).
Place the jar with the blade assembly on to the motor unit (G).
Insert the power plug into a power socket.
Select the blending speed by pressing button I (E) or II (F). Hold the blender firmly with both hands.
As soon as the ingredients are properly processed, release the selected speed button and disconnect the power cord from the power socket.
Take the blade assembly off the motor unit.
Turn the jar upside down so that the blade assembly (J) is on top and carefully take it off the jar (H). Incorrect handling may result in the contents of the jar being spilled.
Now you may place the lid (I) on to the portable jar (H) and enjoy your prepared beverage, e.g. on your way to work.

ATTENTION: Do not leave the blender running for longer than 1 minute. Majority of ingredients require only quick pulse blending to achieve satisfactory results. Whenever the appliance heats up while blending, turn it off, pull the power plug out of the power socket, and allow the blender to rest for at least 15 minutes before using again. Under no circumstances should you go above the MAX mark. This risks overloading the appliance and damaging it.

FAQ

How do I clean the blender?

You can clean the blender by following these steps:

Disassemble the blender by removing the blending jar, lid, and blade assembly.
Wash these parts in warm water containing kitchen detergent.
Rinse these parts thoroughly under running water.
Dry thoroughly before reassembling.

Can I use the blender for hot ingredients?

No, it is not recommended to use the blender for hot ingredients. Allow hot ingredients to cool down before processing them in the blender.

Dear customer,

Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all the instructions in this user’s manual.

IMPORTANT SAFETY INSTRUCTIONS

This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use of the product in a safe manner and understand the potential dangers. Cleaning and maintenance performed by the user must not be performed by children unless they are older than 8 years of age and under supervision. Keep this appliance and the power cord out of reach of children that are younger than 8 years of age.
Children must not play with the appliance.
Before plugging this appliance into a power socket, make sure the voltage stated on the model plate corresponds to the voltage in the power socket.
Never use accessories, which have not been supplied with this appliance or which are not designed for this appliance.
Always place the appliance on an even and stable surface.
Do not place the appliance on window sills or unstable surfaces.
Do not use the appliance in an industrial environment or outdoors!
The appliance is designed only for household use and constructed for processing the usual amount of food in a household.
If you will not be using the appliance, turn it off and disconnect the power cord from the power socket. Store the appliance out of children’s reach.
Never use the blender on a hot hotplate or gas stove or near appliances that are sources of heat.
Make sure that the power cord and plug cannot come into contact with water or dampness.
Make sure the power cord does not hang over the edge of a table or that it does not touch a hot surface.
Turn off the appliance before disconnecting the power cord from the power socket.
Do not disconnect the appliance from the power socket by pulling the power cord – it may damage the power cord/power socket. Disconnect the cord from the power socket by gently pulling the plug of the power cord.
Do not use an appliance with a damaged power cord. If the power cord is damaged, it must be replaced by an authorised service centre or by a similarly qualified person, this will prevent the creation of a dangerous situation.
Entrust all repairs and adjustments to a specialised company/service. Unqualified tampering with the appliance may result in injury by electric shock.
Do not use the appliance for any other purposes than those intended.
Always disconnect the appliance from the power socket if you will be leaving it without supervision and before assembly, disassembly or cleaning.
Do not put your hands into the blending jar while the appliance is running.
Do not put objects into the blending jar other than ingredients or liquids, which are to be blended.
Do not process hot or boiling liquids. Allow them to cool down to at least 60 °C before blending them.
Do not leave the appliance in continuous operation for longer than 2 minutes. Before turning it on again, allow the motor to rest for at least 2 minutes.
When blending hard ingredients or large doses of ingredients/liquids do not operated the appliance for longer than 1 minute.
Attention! The blending blades are sharp! Under no circumstances should you touch them when the appliance is running! When cleaning the blades, follow the instructions in the Care and Cleaning chapter.

DESCRIPTION OF THE BLENDER

PHILCO-PHSB-610-MJ-Blender-FIG-1

A. Measuring cup
B. Lid
C. Blending jar
D. Safety jar locking system
E. Button for speed I
F. Button for speed II
G. Motor unit
H. Portable jar
I. Lid of the portable jar
J. Blade assembly of the portable jar

BEFORE FIRST USE

Before using the measuring cup, lid, blending jar, portable jar, lid and blade assembly, it is necessary to wash these parts in warm water containing kitchen detergent. Then thoroughly rinse these parts under running water and dry thoroughly.

WARNING:

The blade assemblies in the portable jar and in the blender jar are very sharp. There is a serious risk of injury. Handle them very carefully.

Safety jar locking system

The appliance has a safety jar locking system that will prevent it from being started unless it is properly assembled.

USING THE BLENDER

You can use the blender in two ways. The first way is with the blending jar (C) attached and the second way is with the blade assembly (J) and portable jar (H) attached.

Using the blending jar (C)

Place the blending jar (C) on to the motor unit (G).
Place the ingredients that you wish to process into the jar.
Put on the lid (B). Make sure that the lid and the measuring cup (A) are properly attached.
Insert the power plug into a power socket.
Select the blending speed by pressing button I (E) or II (F). Hold the blender firmly with both hands.
As soon as the ingredients are properly processed, release the selected speed button and disconnect the power cord from the power socket.
Take the blending jar (C) off the motor unit (G).

Operation with the portable jar (H)

Place the ingredients into the portable jar (H) and then carefully attach the blade assembly (J).
Place the jar with the blade assembly on to the motor unit (G).
Insert the power plug into a power socket.
Select the blending speed by pressing button I (E) or II (F). Hold the blender firmly with both hands.
As soon as the ingredients are properly processed, release the selected speed button and disconnect the power cord from the power socket.
Take the blade assembly off the motor unit.
Turn the jar upside down so that the blade assembly (J) is on top and carefully take it off the jar (H). Incorrect handling may result in the contents of the jar being spilled.
Now you may place the lid (I) on to the portable jar (H) and enjoy your prepared beverage, e.g. on your way to work.

ATTENTION:

Do not leave the blender running for longer than 1 minute; majority of ingredients require only quick pulse blending to achieve satisfactory results. Whenever the appliance heats up while blending, turn it off, pull the power plug out of the power socket and allow the blender to rest for at least 15 minutes before using again. Under no circumstances should you go above the MAX mark. This risks overloading the appliance and damaging it.

RECOMMENDATION:

To achieve an even consistency, always cut the ingredients into equal size pieces (approx. 1.5 x 1.5 cm).

CARE AND CLEANING

Before cleaning, always make sure that the blender is turned off and the power plug is disconnected from the power socket. Take the blending jar off the body of the appliance and empty it. Pour clean water (about 0.5 L) into the blending jar and close the lid. Place the blending jar on to the body of the appliance. Press and briefly hold down button I or press it repeatedly. In this way you will release the remains of blended ingredients from the blending jar and the blade assembly. (You can do the same with the portable jar and blade assembly.) Disconnect the blender from the power socket. Ensure that the blending blades have come to a full stop. Remove the blending jar from the body of the appliance and pour out the water. Use warm water and kitchen detergent to clean the measuring cup, lid, blending jar, portable jar, lid of the portable jar and the blade assembly. Then thoroughly rinse under flowing water and dry thoroughly. Attention! The appliance’s blending blades are sharp! When handling them, pay extra attention. Clean the body of the appliance with a lightly damp cloth and dry it. Never submerge this part of the appliance in water or in any other liquid. Do not use any abrasive cleaning products, petrol or solvents to clean the appliance and its accessories. Place the appliance in a clean, dry place out of reach of children.

TECHNICAL SPECIFICATIONS

Rated voltage 220 – 240 V ~
Rated frequency 50/60 Hz
Power input 350 W
Operating time Max. 1 minute

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over these products to determined collection points. Or as an alternative in some European Union states or other European countries, you may return your products to the local retailer when buying an equivalent new product. Correct disposal of this product helps save valuable natural resources and prevents damage to the environment caused by improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste. For business entities in European Union states If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary information. Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer. This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.

Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes. The original version is in the Czech language.