SENCOR SCS WA1001 Active Subwoofer User Manual
- June 16, 2024
- SENCOR
Table of Contents
SCS WA1001
ACTIVE SUBWOOFER
USER’S MANUAL
SPECIFICATIONS
Warning:
Don’t put the machine in the rain or the mist in case of lightning and fire.
Attention: Don’t block the hole of ventilation or put objects on the machine.
Attention: Leave some space around the machine in order to be ventilated.
IO” Subwoofer Box
Max. peak Power: 400W
Max. RMS Power: I 00 W
Frequency range (Full): 40 Hz ~ 3000 Hz (± I dB)
Frequency range (LPF): 40 Hz ~ 200 Hz (± 1,5 dB)
Variable LOW Pass Filter
Input sensitivity: 0,2 V ~ 5 V
Speaker impedance: 4 Ohms
Plastic Grill Cover
Dimensions: 485 x 305 x 330 cm
Fuse 20A
SYSTEM WIRING DIAGRAM
Connection of Power Cord
- Since this unit deals with a high power, large current will flow and the wiring of the power cord is high importance.
- Connect the red wire directly to the (+) terminal of the battery using the cord with a fuse holder supplied.
- Connect the black wire tightly to an appropriate screw on the metal part of car after removing paint for proper grounding. Be sure to use the screw not to bring danger for driving.
- Proper connection will provide clear sound.
Connection of Remote ON/OFF Wire
- Connect the orange wire to a switched power cord of the car stereo
To be connected to this unit will control the unit power on/off -with the car ste reo’ s. The switched power cord may be obtained an auto antenna cord of the car stereo.
Connection of Aux Input (Low Input)
- Connect Aux input wires with RCA type pin jack as follows:
WHITE to L ch pre-input of the car stereo RED to R ch of the car stereo
Input sensitivity control
- Adjust the input sensitivity to output of a car stereo connected.
WIRING OPERATION
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of
this equipment at your applicable collection point for the recycling of
electrical & electronic equipments waste.
In the European Union and Other European countries which there are separate
collection systems for used electrical and electronic product. By ensuring the
correct disposal of this product, you will help prevent potentially hazardous
to the environment and to human health, which could otherwise be caused by
unsuitable waste handling of this product. The recycling of materials will
help conserve natural resources. Please do not therefore dispose of your old
electrical and electronic equipment with your household waste. For more
detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you
purchased the product.
Changes in text and technical parameters reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>