better bathrooms Morella 80 Vanity Cabinet User Manual
- June 16, 2024
- Better Bathrooms
Table of Contents
better bathrooms Morella 80 Vanity Cabinet
Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep it for future reference.
- Multi-person assembly
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers We’re on a mission to bring
you extraordinary bathroom products, for less. From modern to traditional
style ceramics, plus the gorgeous fixtures, fittings and furniture to match.
So, you can fall in love with your space every single day. As one of the UK’s
largest independent bathroom stores, we’ve received countless awards;
including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100. We hope your new product goes
above and beyond your expectations. However, should any problems occur,
please;
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- Please ensure the product is installed level on all 4 plains
- The tap flow rate should be reduced to suit the basin, allowing the tap to be turned on fully without over splashing of the basin
- Use cut-out screw holes if provided to fix the furniture to the wall
- Please inspect the product fully for any damage or defects before installation
- Ensure the correct waste is installed and is water-tight, periodically check the installation for leaks
- The tap in the photo does not belong to the purchased product. It is sold separately. It is used for visual purposes only.
- Always check all walls before drilling to prevent damage to pipes and cables.
Tools required
Troubleshooting
The drawer not straight / not closing See the drawer adjustment guide above
Leaking
Check sealant, and reapply if necessary
Installation
Please spend 5 minutes reading this section before commencing with the installation of your new furniture
- Should any of your items have a defect, please do not install as returns will not be accepted once fitted.
- We advise that you use a qualified person to install your units, as any issues relating to poor fitting will not be accepted by the supplier.
- This product is water resistant but NOT waterproof therefore the room must be well-ventilated and any standing water must be wiped dry after use.
- Please avoid direct sunlight as this will cause the painted surfaces to discolour.
- Due to motion in transit, the cabinet doors and drawers may need to be adjusted after installation
- Floor-standing units must be secured back to the wall through the back rail using suitable fixings.
- Basins units should be fitted as below, and then the basin should also be secured where applicable, using Fischer bolts not supplied) though the fixing points under the basin and/or silicone between the basin and unit.
- Fixings and wall type must be sufficient to support the unit, the fixings supplied are for solid wall fixing.
INSTALLATION INSTRUCTION
Drawer Removal 
Drawer Adjustment
Maintenance
Please note that although these units have been designed to give years of pleasure and satisfaction, you will help maintain the original beauty of your bathroom by following these guidelines.
Melamine, vinyl and foil-wrapped doors
Occasional marks, can in most cases, be removed with a soft damp cloth. More
persistent marks can be removed using a non-silicone-based furniture cleaner.
Hot soapy water should be avoided. Once the mark is removed, the area should
be wiped over with a damp cloth to remove any excess and dried with a soft
clean cloth. On no account should solvent or an abrasive cleaner be used as
permanent damage to the finish could take place.
High Gloss Doors
Use a cleaning product not containing aggressive substances like acetone,
alcohol, bleach etc. as those components could seriously damage the surface of
the door. The best would be to use a soft cotton or micro fibre cloth with
only water and a soft soap (containing a maximum 1% of liquid soap)
Carcass components
Do not use polish on any surfaces. A damp cloth with soapy water will clean
off most marks or spills. On no account should any spillage, even water, be
allowed to lie of the surface. Bleach scouring pads and multi-surface cleaners
should not be used.
Drawers, runners, door hinges
These should be wiped out with a damp soapy cloth and wiped dry with a soft
cloth as necessary. The roller runners and hinges are lubricated and should
not be cleaned with a degreasing agent as this will affect the action of the
moving parts. Never lean on partially or fully opened doors and drawers to
gain access to the units. The hinges are specified to adequately support the
weight of the door, plus small additional weights such as wire accessories. It
is advised that once the bathroom has been installed, you should check every
six months that all screws on the hinges are tight.
Worktops
Although the worktop is hard-wearing, sharp objects will scratch and excessive
heat will scorch the surface. Care should be taken not to drop any heavy
objects onto the worktop as the surface may crack. For cleaning, a damp soapy
cloth with clean off most spills. Bleaches, scouring pads and multi-surface
cleaners should not be used. Corrosive liquids and make-up should be wiped off
immediately. On no account should any spillage, even water, be allowed to lie
on the surface.
Temperature, humidity, ventilation and proximity
Avoid excessive changes in temperature and humidity. We would advise an
extractor fan to be installed in all bathrooms which include furniture to
reduce the chance of water ingress damage. The extractor fan should be used
every time that the shower/bath is used and should be left switched on for a
sufficient time afterwards to allow for adequate ventilation. Ensure that the
fan has been correctly sized for the room in use. The units, under no
circumstance, should be fitted in a location where they are regularly
subjected to contact with water.
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials. If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.
For more information
- visit betterbathrooms.com
- email customerservices@buyitdirect.co.uk
- call 03303903062
- write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>