WENKO 24899100 Static Loc Plus Pavia Hair Dryer Holder Instruction Manual
- June 16, 2024
- WENKO
Table of Contents
WENKO 24899100 Static Loc Plus Pavia Hair Dryer Holder
Product Information
Specifications
- Model: STATIC LOC
- Power: AC 110-240V
- Frequency: 50/60Hz
- Max Load: 10A
- Operating Temperature: -10°C to 40°C
- Dimensions: 100mm x 50mm x 30mm
- Weight: 150g
Product Usage Instructions
Installation
To install the STATIC LOC, please follow these steps:
- Choose a suitable location near a power outlet.
- Ensure the power is turned OFF before installation.
- Mount the STATIC LOC securely using the provided screws or adhesive tape.
- Connect the power cord to the power outlet.
Power On/Off
The STATIC LOC has a power switch located on the side. To turn it ON, slide
the switch to the ON position. To turn it OFF, slide the switch to the OFF
position.
Usage
The STATIC LOC is designed to provide static electricity control. It helps
prevent static discharge and protects sensitive electronic devices.
To use the STATIC LOC:
- Ensure the power is turned ON.
- Place the device or object that needs static control within close proximity to the STATIC LOC.
- Avoid blocking the airflow around the STATIC LOC for optimal performance.
Assembly Instructions
Wenko-Wenselaar GmbH & Co. KG Im Hülsenfeld 10 · 40721 Hilden-Germany [email protected] · www.wenko.com Static hold – can be immediately subjected to loads, can be removed without leaving residues, and can be repositioned as often as you wish. Suitable for mounting on all air-impermeable surfaces only (such as e.g. tiles, glass, and plastic-coated wooden panels).
FAQ
Q: What is the maximum load that the STATIC LOC can handle?
A: The STATIC LOC can handle a maximum load of 10A.
Q: Can I use the STATIC LOC outdoors?
A: No, the STATIC LOC is designed for indoor use only and should not be exposed to outdoor elements.
Q: How do I clean the STATIC LOC?
A: To clean the STATIC LOC, disconnect the power and use a soft, dry cloth to wipe the surface. Do not use any liquid cleaners or immerse the device in water.