WENKO 1546012 Loft Coat Stand Instruction Manual
- June 16, 2024
- WENKO
Table of Contents
WENKO 1546012 Loft Coat Stand
Product Information
Specifications
- Fasteners: M6x12mm, M6x30mm, M6x70mm
- Components: ax12, bx8, cx2, dx4, ex4, fx4, gx1
- Quantity: x4, x2, x2, x2
Product Usage Instructions
Step 1: Assembly
- Refer to the provided assembly instructions in your language (D, F, E, I, Montage-instructie, Montagevejledning, S, Instrukcja montau, Montaj kilavuzu).
- Gather all the necessary components and fasteners.
- Follow the step-by-step instructions to assemble the product.
Step 2: Adjusting Wobbliness
After assembling the product, you may need to adjust its
wobbliness.
- Identify the components labeled “d” and “b”.
- If there is wobbliness, adjust the “d” components until the desired stability is achieved.
- Once adjusted, fix the “d” components in place.
Step 3: Finalize Assembly
Complete the assembly by following these steps:
- Check all connections and tighten any loose fasteners.
- Ensure all components are properly aligned.
- Confirm that all necessary components are included.
Assembly Instructions
Frequently Asked Questions (FAQ)
1. What are the specifications of the fasteners?
The fasteners included in the product are M6x12mm, M6x30mm, and M6x70mm in size.
2. How many of each component are included?
The product includes the following quantities of components: x4, x2, x2, x2.
3. How do I adjust the wobbliness of the product?
To adjust the wobbliness, identify the components labeled “d”. Adjust these components until the desired stability is achieved, then fix them in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>