PROAIM CM-MGGP Megagrip Car Vehicle Camera Mount Instruction Manual

PROAIM CM-MGGP Megagrip Car Vehicle Camera Mount

Product Information

Specifications

• Product Name: Megagrip Car/Vehicle Camera Mount (CM-MGGP)
• Package Contents:
  • Camera Plate with Ball Head
  • 3 x Suction Cups
  • 4 x Rubber Sleeves
  • 3 x Rod Jointers
  • 2 x Safety Straps
  • Hard Case

Product Usage Instructions

Megagrip Setup

1. Place the first suction cup on the selected position where you want to shoot.
   • Press down the suction cup and keep pushing the pump to firmly fix it on the surface.
2. Repeat the above step for all suction cups.
3. Attach the Adjustable Rod Clamp with suction cup and tighten the knob to secure the clamp.
4. Insert a rod of any desired length into the rod clamp and tighten it with the knob.
   • Repeat the previous step to attach the rod clamp to the other end of the rod and fix it with the knob.
5. Attach the ball leveling camera plate with the rod clamp and carefully secure it by tightening the knob.
   • Repeat the same process for the rest of the clamps.
6. For additional security, use safety belts/tension straps even though Megagrip’s holding force is adequate for regular driving shots.
   • When mounted on cars, the objects attached to Megagrip (e.g., camera) must be additionally secured.

Things To Remember

• Use the rubber sleeves provided to avoid dents and scratches on car paint.
• Tighten tension straps carefully to avoid damages.
• The length of rods can be extended as per your setup requirements with the help of rod jointer/connector to achieve different configurations.
  • Note: Test all fixtures before driving.

FAQ

Q: What is included in the Megagrip Car/Vehicle Camera Mount package?

A: The package includes a camera plate with a ball head, 3 suction cups, 4 rubber sleeves, 3 rod jointers, 2 safety straps, and a hard case.

Q: How do I set up the Megagrip Car/Vehicle Camera Mount?

A: Follow these steps to set up the Megagrip Car/Vehicle Camera Mount:

1. Place the suction cups on the desired positions and firmly fix them on the surface by pressing down and pumping.
2. Attach the Adjustable Rod Clamp to the suction cups and tighten the knob to secure them.
3. Insert a rod of any desired length into the rod clamp and tighten it with the knob. Repeat this step for the other end of the rod.
4. Attach the ball leveling camera plate to the rod clamps and tighten them carefully.
5. Use safety belts/tension straps for additional security.

Q: How should I use the rubber sleeves provided?

A: The rubber sleeves should be used to avoid dents and scratches on the car paint. Simply slide them onto the appropriate parts of the Megagrip Car/Vehicle Camera Mount.

Q: Can I extend the length of the rods?

A: Yes, you can extend the length of the rods using the rod jointers/connectors provided. This allows you to achieve different configurations based on your setup requirements.

Assembly Instructions

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Note: If you have purchased (CM-MGGP-00) kit, you will receive the following:

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Note: If you have purchased (CM-MGGP-01) kit, you will receive the following:

Megagrip Setup

To guarantee proper adhesion of suction cups, check that the surfaces of both, the suction cup and mounting surface are clean, dry & dust–free.
NOTE: Please mount the device on smooth, even, and non-porous surfaces.

• Remove the complimentary dust cover and place your first suction cup on the selected position from where you want to shoot. Press down the suction cup and keep pushing the pump to firmly fix it on the surface. Repeat this process for all suction cups.
• Attach the Adjustable Rod Clamp with a suction cup and tighten the knob to secure the clamp.
• Insert a rod of any desired length into the rod clamp and tighten it with the knob. Then by repeating the previous step, attach the rod clamp to the other end of the rod and fix it by the knob.
• Attach the ball leveling camera plate with a rod clamp and secure it carefully by tightening the knob. Repeat the same process for the rest of the clamps.
• Although the Megagrip’s holding force is adequate for regular driving shots, safety belts/tension straps must be used for additional security. When mounted on cars, the objects attached to Megagrip (e.g. camera) have to be secured additionally.

Things To Remember

• Use the rubber sleeves to avoid dents and scratches on car paint. Tighten tension straps carefully to avoid damage.
• The length of the Rods can be extended as per your setup requirements with the help of rod joiners/connectors, to achieve different configurations.
• You can easily adjust/level the angle of each rod clamp through the provided knob in 360°Pan & Tilt Rotation, which gives extra flexibility, and thus you can mount cups to virtually any part of the vehicle.
• You can adjust the angle of the Ball Levelling Camera Platform at any required angle in 360°rotation and can be locked down with a knob when you wish to capture shots in a static position.
  NOTE: Test all fixtures before driving.

YOUR PROAIM MEGAGRIP CAR/VEHICLE CAMERA MOUNT ALL DRESSED UP AND READY TO

GO

Warranty: We offer a one-year warranty for our products from the date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>