greenworks BAG711 24V 4.0Ah High Capacity Lithium-Ion Battery Instruction Manual
- June 16, 2024
- Greenworks
Table of Contents
Instruction Manual
RECHARGEABLE LI-ION BATTERY
BAG711/BAG708/BAG709/BAG710
www.greenworkstools.com
IMPORTANT SAFETY INSTRUCTIONS
For the proper use, maintenance and storage of this battery, it is crucially
important that you read and understand the instructions given in this manual.
To avoid serious injury, risk of fire, explosion and danger of electric shock
or electrocution:
- If the battery pack case is cracked or damaged, DO NOT insert into the charger. Replace with a new battery pack.
- Charge the battery pack only with the recommended charger.
- DO NOT try to short circuit any terminals of battery pack.
** WARNING**
If the battery fluid gets in your eyes, flush immediately with clean water for
at least 15 minutes. Get immediate medical attention. Do not charge the
battery pack in rain or in wet conditions. Do not immerse the tool, battery
pack, or charger in water or other liquid.
-
Do not allow the battery pack or charger to overheat. If they are warm, allow them to cool down. Recharge only at room temperature.
-
Do not place the battery pack in the sun or in a warm environment. Keep at normal room temperature.
-
Keep in shady, cool and dry condition, if the battery is not charged for a long time; charge the battery for 2 hours every 2 months.
-
The battery pack cells may develop a small leak under extreme usage or temperature conditions. If the outer seal is broken and the leakage gets on your skin:
– Use soap and water to wash immediately.
– Neutralize with lemon juice, vinegar, or other mild acid. -
If leakage gets in your eyes, follow instructions above and seek medical attention.
-
Please check prior use, if output voltage and current of the battery charger is suitable for the charging battery pack.
-
During transporting, the battery pack needs protective packaging.
-
Handle with care.
-
Keep away from humidity and fire.
SAFETY NOTES AND PRECAUTIONS
- Do not disassemble the battery.
- Keep away from the children.
- Do not expose the battery to water or salt water, battery should be stored in a cool and dry location and should place the battery in cool and dry environment.
- Do not place the battery in high-temperature locations, such as near a fire, heater, etc.
- Do not reverse the positive terminal and the negative terminal of the battery.
- Do not connect the positive terminal and the negative terminal of the battery to each other with any metal objects.
- Do not knock, strike or step on the battery.
- Do not solder directly onto the battery and pierce the battery with nails or other edge tools.
- In the event that the battery leaks and the fluid gets into one’s eye, do not rub the eye. Rinse well with water.
- Immediately discontinue use of the battery, if, while using the battery emits an unusual smell, feels hot, changes color, changes shape, or appears abnormal in any other way.
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to operate the tool better and safer.
Symbol | Direct current |
---|---|
V | Explanation |
W | Voltage |
**** | Power |
Read all safety warnings and all instruc-tions. | |
**** | Precautions that involve your safety. |
RISK LEVELS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL | CAUTION | MEANING |
---|---|---|
WARNING | Indicates an imminently hazardous situation,which, if not avoided, |
will result in death or serious injury.
| DANGER| Indicates an imminently hazardous situation,which, if not avoided,
will result in death or serious injury.
| SIGNAL| Indicates a potentially hazard-ous situation, which, if not avoided,
may result in minor or moderate injury.
| CAUTION| (Without Safety Alert Symbol) Indicates a situation that may result
in property damage.
PROPOSITION 65
WARNING
This product contains a chemical known to the state of California to cause
cancer, birth defects or other reproductive harm. Some dust created by power
sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints;
- Crystalline silica from bricks and cement and other masonry products;
- Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well- ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL
WARNING
If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Dispose of the battery and replace with a new battery pack. DO NOT ATTEMPT TO REPAIR IT! To avoid injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment:
- Cover the battery’s terminals with heavy-duty adhesive tape.
- DO NOT attempt to remove or destroy any of the battery pack components.
- DO NOT attempt to open the battery pack.
- If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the solution in the eyes or on skin, and do not swallow it.
- DO NOT place these batteries in your regular household trash.
- DO NOT incinerate.
- DO NOT place them where they will become part of any waste landfill or municipal solid waste stream.
- Take them to a certified recycling or disposal centre.
OPERATION
7.1 CHECK BATTERY CAPACITY
Press the battery capacity indicator (BCI) button. The lights will illuminate
according to the batteries capacity level. See chart below:
Lights | Capacity |
---|---|
3 Green Lights | The battery is more than 80% capacity. |
2 Green Lights | The battery is between 50% and 80% capacity. |
1 Green Light | The battery is between 20% and 50% capacity. |
1 Blinking Green Light | The battery is between 10% and 20% capacity. |
Lights go out | The battery is under 10% capacity and requires charging |
immediately.
-
- BATTERY CAPACITY INDICATOR (BCI) BUTTON 2. LIGHT METRE
BATTERY PROTECTION FEATURES
This lithium-ion battery packs are designed with features that protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures down to -14°C (6.8°F). Put the battery pack on a tool and use the tool in a light duty application. After about a minute, the pack will warm up and begin operating normally.
7.2 USB POWER PORT
NOTE
The battery pack is equipped with a USB type A.
- Make sure that the battery pack is charged.
- Pull the dust cover.
- Insert a USB plug into USB power port to supply power or charge your device.
- BATTERY CAPACITY INDICATOR (BCI) BUTTON 2. LIGHT METRE
This battery pack can become a portable charger for charging phones, tablets, mp3 players, and other mobile devices.
TECHNICAL DATA
Model | BAG711 |
---|---|
Battery | 21.6V ****1.5AH, 32.4Wh, 24V MAX |
USB output voltage | 5V DC |
USB output current | 1 A |
Charge time | 180 min. (use 29972 Charger) |
45 min. (use CAG801 / CAG812 Charger)
30 min. (use 2903 102 / 29862 Charger)
Model| BAG708
---|---
Battery| 21.6V 2.0AH, 43.2Wh, 24V MAX
USB output voltage| 5V DC
USB output current| IA
Charge time| 240 min. (use 29972 Charger)
---|---
60 (use CAG801 / CAG812 Charger)
40 min. (use 2903102 / 29862 Charger)
Model| BAG709
---|---
Battery| 21.6V 4.0AH, 86.4Wh, 24V MAX
USB output
voltage| 5V DC
USB output
current| 1A
Charge time| 480 nun (use 29972 Charger)
120 min. (use CAG801 / CAG812 Charg-er)
80 min. (use 2903102 / 29862 Charger)
Model| BAG710
---|---
Battery| 21.6V ****5.0AH, 108Wh, 24V MAX
USB output
voltage| 5V DC
USB output
current| 1A
Charge time| 600 min. (use 29972 Charger)
150 min. (use CAG801 / CAG812 Charg-er)
100 min. (use 2903102 / 29862 Charger)
LIMITED WARRANTY
Greenworks
hereby warranties this product, to the original purchaser with proof of
purchase, for a period of three (3) years against defects in materials, parts
or workmanship.
Greenworks, at its own discretion will repair or replace any and all parts
found to be defective, through normal use, free of charge to the customer.
This warranty is valid only for units which have been used for personal use
that have not been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in the owners’ manual
supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
- Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
- The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
- Normal wear, except as noted below;
- Routine maintenance items such as lubricants, blade sharpening;
- Normal deterioration of the exterior finish due to use or exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline, at
1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power equipment unit or
attachment are the responsibility of the purchaser. It is the purchaser’s
responsibility to pay transportation charges for any part submitted for
replacement under this warranty unless such return is requested in writing by
Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
Canadian address:
Greenworks Tools Canada Inc.
1110 Stellar Drive Unit 102
Newmarket, ON, L3Y 7B7
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>