Meihua B04-22PFL04A-H-A Solar Lights With Motion Sensor User Manual

Meihua B04-22PFL04A-H-A Solar Lights With Motion Sensor User Manual

Thank you for purchasing Meihua products. To ensure a better shopping experience, please follow the instructions for use step by step.

If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.

E-mail: meihua@meihuaintelligent.com service @meihua-ledlight.com

Attention

1. The luminaire should be placed in suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.
3. Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)
4. The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 8H when the sunlight is sufficient, the lamp will turn on again.
5. Please install the solar panel in a place that can get sufficient sunlight. Note that the place like tree shade or glass will affect the charging effect.
6. When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
7. Please clean the solar panel regularly to ensure the charging effect.
8. Do not disassemble and modify the product by yourself to avoid product damage.
9. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.

Parameter

Model| Sensor B| Solar Panel| Working Voltage| Color Temperature| Lighting Angle| Projection Distance| Waterproof
Rating| Extention
Cord| Lamp body
Material| Ta
---|---|---|---|---|---|---|---|---|---|---
SL-FLO4| Fixed 30 seconds| 6V/3W| 3V/DC| 2700K-4000K-6500K| 45°| 5M| IP66| 5M| PC| -25 C —40 C
SL-FLO4| Fixed 30 seconds| 6V/4W| 3V/DC| 2700K-4000K-6500K| 45°| 5M| IP66| 5M| PC| -25 C —40 C
Note: When fully charged, the 6V/3W induction mode works totally for 150 times on 30 seconds, and the 6V/4W induction mode works totally for 300 times on 30 seconds

Product models/size/accessories

Solar panel installation

Wall mounted

Note: The solar panel needs to be installed in a place where there is sufficient sunlight. The installation location like tree shade or glass will affect the charging effect.

Flood light installation

**Wall mounted

**

Wiring guide

Connect the male and female ends of the extension cord and tighten the waterproof cap.

Sensor light working mode

Daytime: sun light charging

Night: sensor light working

Product details

1. OFF/ON switch:
   2700K-4000K-6500K-shutdown

2. Working indicator light:
   Steady green light-indicates it has been turned on Steady red light-indicates it’s charging by solar

3. Battery indicator:
   1 light on – 30% battery,
   2 lights on – 70% battery,
   3 lights on – 100% battery

Sensing mode: Lights on when people come, lights off when people leave, lighting for 30S each time

FAQ

Q: The lamp doesn't work,

Q: The lamp doesn't work, A: 1. Make sure the lamp is switch on. A: 2. The battery is out of power, please charge the battery by solar panel in direct sunlight.

Q: Lighting time is short.

A: 1. The working time depends on the power which stores in the rechargeable battery. (The battery can only be fully charged in a sunny environment) A: 2. The more power it charges during the day, the longer time it works during the night.

Q: Charging time.

A: Charging for over 8 hours is recommended. The solar product's charging time is affected by weather condition and installation location.

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Company name: Shenzhen Oumeike Lighting Technology Co., Ltd.
Address: No. 19-20, Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China (+86 0755-28608199)

C&E Connection E-Commerce (DE) GmbH Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
E-mail: info@ce-connection.de
Tel:+49 (069) 27246648

CET PRODUCT SERVICE LTD. Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK
Tel: +447419325266
E-mail: info@cetproduct.com

http://www.meihua-ledlight.com
E-mail: meihua@meihuaintelligent.com
E-mail: service@meihua-ledlight.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>