MEIHUA B04-21SP-H-D 3 in 1 Solar Spotlights Outdoor Garden Lights User Manual

MEIHUA B04-21SP-H-D 3 in 1 Solar Spotlights Outdoor Garden Lights

Thank you

Thank you for purchasing Meihua products. To ensure a better shopping experience, please follow the instructions for use step by step.

If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.

E-mail: meihua@meihuaintelligent.com
service@meihua-ladlight.com

Attention

1. The luminaire should be positioned at suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.
3. Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otheiwise the light will flicker with high frequency)
4. The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge BH when the sunlight is sufficient, the lamp will tum on again.
5. Please install the solar panel in a place with sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.
6. When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
7. Please clean the solar panel regular1y to ensure the charging effect. B. Do not disassemble and modify the product by yourself to avoid product damage.
8. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.

Parameter table

Model| Solar Panel| Working Voltage| Color temperature|

Lighting angle/Projection distance

|

Brightness

|

waterproof Rating

|

Extinction
cord

|

Control method

|

Lamp body material

| Ta
---|---|---|---|---|---|---|---|---|---|---
A1| A2| | C
SL-SP02| 6V/2W| 3VfOC| 2700K/4000K/6000K| 25″| SM| 60 “| 3M| 25″| SM| 30°| SM|

High brightness

| low
brightness| IP66| BM| CI| AluninumJPC| -25 ‘ C- 40’C
SL-SP03| 6V/3W| 3VfDC| 2700K/4000K/6000K| 25°| SM| 60 °| 3M| 25°| 5M| 30°| 5M|

High brightness

| Low
brightness| IP66| 11M| cI| AluninumJPC| -25′ C- 40’C
SL-SP04| 6V/4W| 3V/DC| 2700K/4000K/6000K| 25°| SM| 60 “| 3M| 25″| SM| 30°| SM|

High brightness

|

Low
brightness

| IP66| 14M| cI| Aluninum/PC| – 25′ C- 40’C

Product models/size/accessories

Solar panel installation

• Ground-mounted

• Wall mounted

Note : The solar panel needs to be installed in a place where there is sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.

Spotlight installation

• Ground-mounted

• Wall mounted

How to works

Wiring and mounting bracket

Control box and Light and solar panel extension cord connections:
Connect the male and female ends of the extension cord and tighten the waterproof cap.

Control box function introduction

1. CT) Working indicator lights:

2. Battery indicator: green light on indicates normal power supply, if light is off indicates that the battery is not powered.

3. High/ Low light mode indicator: green light indicates high light mode power supply, if light’s off, it indicates low light mode power supply.

4. Solar panel indicator: red light indicates that the solar panel power supply is normal, if light’s off, it indicates that the solar panel is not powered.

5. Power indicator :
   30: Green light on, about 30% power
   70: Green light on, about 70% power
   100: Green light on, about 100% power

6. ON/OFF: Press once to turn on (default low light mode}-press again is high light mode-press again to turn off (low light-high light-off)

7. Color temperature switch: press the switch 2700K-4000K-6000K cycle.

8. Installation fixing hole
   Input : solar panel input line
   Output: light supply output line

FAQ

Q: The lamp doesn’t work.

Q: The lamp doesn't work.

A: 1. Make sure the lamp is switch on. A: 2. The battery is out of power and charge the battery by solar panel in direct sunlight.

Q: Lighting time is short.

Q: Lighting time is short.

A: 1. The working time depends on the power which stores in the rechargeable battery.(The battery can only be fully charged in a sunny environment) A: 2. The more power it charges during the day, the longer time it works during the night.

Q: Charing time.

Q: Charing time.

A: 1. Charging for over 8 hours is recommended.The solar products’ charging time is affected by weather condition and installation location. A: 2. WorKing hours When the battery is fully charged, Light control type: work for about 6 hours in high light mode, and about 12 hours in low light mode.

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>