BELLEZE 014-HG-43507 Corner Cabinet with LED Light Installation Guide
- June 16, 2024
- BELLEZE
Table of Contents
014-HG-43507 Corner Cabinet with LED Light
Installation Guide
014-HG-43507 Corner Cabinet with LED Light
| FOLLOW US: | CONTACT INFO: | ITEM NO. 014-HG-43507 |
|---|---|---|
| @bellezefurniture | [email protected] | |
| 1-800-682-6376 | The instruction booklet |
contains IMPORTANT
safety information. Please read it in full and keep it for future reference.
Scan this QR Code to view our online tutorial
https://www.belleze.com
/assembly-instructions
Estimated time for assembly: 45 mins
Weight limitations are as follows:
Assemble the furniture on an empty carton, carpet, or rug to prevent
scratches or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any
hardware or products, do not use it until you have restored the missing
parts.
This furniture requires 2 people for
assembly.
Read this instruction manual prior to assembly to familiarize yourself with
the various steps.
Lay out all components and hardware separately on a flat surface and make sure
that no parts are missing or damaged before assembly. Do not destroy or
discard any packaging until you are certain that you have all the necessary
parts for assembly.
Hand tight all hardwares and careful not to over tighten to avoid damaging the
product.
CAUTION
There are small components used in the construction of this product. Loose
items should be kept away from pets and children to avoid a choking hazard.
Keep all plastic bags and packaging film away from pets and children to avoid
suffocation.
PACKAGE CONTENTS
PACKAGE CONTENTS
| CODE | DESCRIPTION | QTY |
|---|---|---|
| 1 | Top Panel | 1 |
| 2 | Center Panel | 1 |
| 3 | Bottom Panel | 1 |
| 4 | Storage Panel | 3 |
| 5 | Left Front Leg | 1 |
| 6 | Right Front Leg | 1 |
| 7 | Left Side Leg | 1 |
| 8 | Right Side Leg | 1 |
| 9 | Left Panel | 1 |
| 10 | Right Panel | 1 |
| 11 | Back Leg | 1 |
| 12 | Left Cabinet Door | 1 |
| 13 | Right Cabinet Door | 1 |
PACKAGE CONTENTS
PACKAGE CONTENTS
Attach magnetic catch and insert
cabinet door pivot hinge bushing to the center panel (2).
Assemble the left front leg (5) to the left side leg (7). Then
assemble the right front leg (6) to the right side leg (8).
Connect the power cord for the LED
lights between the left and right legs. Use provided cable clip to hold the
cord on top of the top panel.
Insert shelf pegs into the cabinet and put on the storage shelf
panels (4). Insert pivot hinge bushings to the bottom panel.
Insert the pivot hinge plate underneath the center panel and attach
the right cabinet door (13) to the cabinet.
Insert the pivot hinge plate underneath the center panel and attach
the left cabinet door (12) to the cabinet.
Furniture must permanently fixed to the wall stud with included anti-tipping device to prevent the furniture from tipping over.
- Mark the drill position on the wall with a pencil.
- Drill a small hole on the marked position.
- Insert a wall anchor into the drilled hole.
- Fixed the anti-tipping strap to the wall with provided screws.
YOU’RE FINISHED!
USER INSTRUCTION (REMOTE CONTROL)
ON
Press the ON button to turn on the light.
OFF
Press the OFF button to turn off the light.
Static Color Shortcut
Each button is assign to a color, press the button to select your desire
color.
Increase
Press the increase button to increase brightness in static color mode.
Press the increase button to increase effect speed in light effect mode.
Decrease
Press the increase button to decrease brightness in static color mode.
Press the increase button to decrease effect speed in light effect mode.
Flash 7
Press the button to enable spectrun cycle mode.
The colors will cycle between red, green blue, orange, cyan, violet, and
white.
Strobe 7
Press the button to enable color breathing mode.
The colors will cycle between red, green blue, orange, cyan, violet, and
white.
Flash 16
Press the button to enable spectrun cycle mode.
The colors will cycle between all 16 colors.
Strobe 16
Press the button to enable color breathing mode.
The colors will cycle between all 16 colors.
Warning
Only place items on top of the product if they meet the recommended size and
weight limits.
Climbing on, stepping on, or placing overweighted objects on the product may
cause property damage and/or injuries.
Items placed onto this product must be resting on a support surface without
hanging over the edges.
Warning
Serious or fatal crushing injuries may occur if the furniture tip-over.
Furiture must permanently affixed to the wall with included anti-tipping
device in order to prevent the furniture from tipping over.
Different wall materials requires different types of wall anchors or screws.
Use a suitable wall anchors or screws for your specific wall in order to
secure the stability and load bearing capacity of the furniture. If you are
uncertain about which type of device to use, please contact us or your local
hardware store.
FURNITURE CARE AND MAINTENANCE
Medium – Density Fiberboard
Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the
recommendations in this care and maintenance guide.
MAINTENANCE
- Tighten all bolts and screws again within the first 2 weeks of assembly.
- Check the tightness of all bolts every 2 months and tighten them if necessary.
CLEANING
- Clean the surface of the MDF (medium – density fiberboard) with a lightly dampened cloth.
- Asmall amount of mild soap can be used if necessary.
- Dry the surface immediately after cleaning.
DO NOT use bleach or alcohol to clean the surface.
DO NOT apply wood treatment on parts made with MDF.
MDF will swell and distort when exposed to water damage. Make sure to dry the
furniture immediately after cleaning.
WARNING
The manufacturer and seller are not responsible for any and all liability
relating to personal injury, property damage or losses, whether direct,
indirect, or incidental, resulting from the incorrect attachment, improper
use, inadequate maintenance, unapproved modification or neglect of this
product.
© All copyright of this document belongs to BELLEZE .
This document may not be printed, translated, reproduced, or distributed in
whole or in part without written permission from BELLEZE.
WARRANTY
BELLEZE products come with a 1-year warranty from the date of delivery.
Register your product on our website to enjoy our limited lifetime warranty!
https://www.belleze.com/apps/product- registration
AFTER-SALE SERVICE
Encounter any difficulties or missing parts?
Contact us at 1-800-682-6376 or email
us at [email protected]
We will send you replacement.
Hassle free!
No need to worry about repackaging and sending your item back.
We hope you enjoy your new BELLEZE furniture!
Share your photos on Instagram and tag us: @bellezefurniture.