VEVOR SW-05 Pedestal Sign Holder User Manual

June 16, 2024
VEVOR

VEVOR SW-05 Pedestal Sign Holder

VEVOR-SW-05-Pedestal-Sign-Holder-FIG- \(2\)

Product Information

Specifications

  • Model: SW-04, SW-05
  • Pedestal Sign Stand
  • Adjust the height Size
  • Weight: 4.5kg
  • Base size: 300*340mm
  • Screen size: 210297mm/420297mm

Usage Instructions

Safety
It is important to read the instruction manual and follow all safety precautions before using the Pedestal Sign Stand. The operator must adhere to basic precautions to minimize the risk of personal injury or equipment damage. Keep this manual for future reference.

Warnings and Cautions:

  • Wear gloves when using the Pedestal Sign Stand.
  • Do not sit, stand, or climb on the item.
  • This product is not a toy and should not be played with by children.
  • Inspect the stand before each use and do not use if any parts are loose or damaged.

Assembly

  1. Lock the base and the vertical bar with a wrench.
  2. Place the connecting piece in the connecting rod, ensuring proper positioning.
  3. Insert the upper connecting rod as shown in the manual.
  4. Insert the upper connecting rod again as shown in the manual.
  5. Put the poster in the frame.
  6. Align the display frame with the connecting rod locking screw.
  7. Display the effect when finished.

Important Tips:

  • Avoid putting heavy objects on the display shelf first to prevent tipping.
  • Ensure the unit is installed on level and firm ground.
  • Make sure all parts are securely locked into position.
  • Keep children away from the display area.
  • For outdoor use or windy scenes, add a heavy weight to the floor to prevent product dumping caused by external forces.

Disposal

This product should be disposed of in accordance with local regulations. If you are unsure how to proceed, please contact your local authority for guidance.

FAQ

  • Q: Can children play with the Pedestal Sign Stand?
    A: No, this product is not a toy and should not be played with by children.

  • Q: What should I do if I notice any loose or damaged parts?
    A: Inspect the stand before each use and do not use if any parts are loose or damaged. Contact our technical support for assistance and replacement parts if needed.

  • Q: How should I dispose of the Pedestal Sign Stand?
    A: Follow local regulations for proper disposal. If you are unsure, contact your local authority for guidance on how to proceed.

  • Q: Who is authorized to repair the Pedestal Sign Stand?
    A: Only qualified technicians are authorized to undertake repairs. Please observe all safety notes, precautions, and details in this manual for your safety.

Technical Support and E-Warranty Certificate www.vevor.com/support

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands

Model : SW-04,SW-05

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
CustomerService@vevor.com

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product

**SAFETY

VEVOR-SW-05-Pedestal-Sign-Holder-FIG-
\(3\)**

WARNING! Read and understand all instructions before using this Pedestal Sign Stand. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment. Keep this manual for safety warnings, precautions, operating or inspection and maintenance instructions.
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a possibility of property damage, injury or death if certain instructions are not followed.
WARNING! DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly, you can suffer seriouspersonal injury.

Assembly precautions

  1. Assemble only according to these instructions. Improper assembly can create hazards.
  2. Wear ANSI-approved heavy-duty work gloves during assembly.
  3. Keep assembly area clean and well lit.
  4. Keep bystanders out of the area during assembly.
  5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
  6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
  7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest .

Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

  1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
  2. This product is not a toy nor a toy chest. Do not allow children to play with or near this item.
  3. Inspect before every use; do not use if parts are loose or damaged.

The assembly step:

  1. Lock the base and the vertical bar with a wrench.
  2. Place the connecting piece in the connecting rod (note the position)VEVOR-SW-05-Pedestal-Sign-Holder-FIG- \(5\)
  3. Insert the upper connecting rod as shown.
  4. Insert the upper connecting rod as shown
  5. Put the poster in the frame.VEVOR-SW-05-Pedestal-Sign-Holder-FIG- \(8\)
  6. The display frame can be aligned with the connecting rod locking screwVEVOR-SW-05-Pedestal-Sign-Holder-FIG- \(9\)
  7. Show the effect when finished.

WARNING:

  1. To avoid tipping, don’t put heavy objects on the display shelf first
  2. Ensure the unit is installed on level, firm ground.
  3. Ensure all parts are securely locked into position.
  4. Keep the children away from the display area
  5. Outdoor use or windy scenes need to pay attention to the floor with a heavy weight to prevent external forces caused by product dumping

Product specification parameters

Models SW-04/SW-05
Adjust the height NO
Size A3,A4
Weight 4.5kg
Base size 300*340mm
Screen size 210297mm/420297mm

Disposal
This product should be disposed of by local regulations. If you are unsure how to proceed, contact your local authority
Only qualified technicians are authorized to undertake the repair of A-Frame Sidewalk Sign For your safety, please observe all safety notes, precautions, and details in this manual.

Warranty

Your A-Frame Sidewalk Sign is warranted against defects in materials and workmanship for 12 months from the date of purchase. Faulty goods will be repaired or replaced at VEVOR’s discretion

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A- 1609shi Shanghai
Imported to AUS : SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA : Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH Riimerlicker 9 Z2021,76351Linkenheim-Hochstetten, Germany
Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
TechnicalSupport and E-Warranty Certificate www.vevor.com/support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals