Honeywell LSHDWMK Wall Mounting Kit Installation Guide
- June 16, 2024
- Honeywell
Table of Contents
Honeywell LSHDWMK Wall Mounting Kit
Product Information
The LSHDWMK is a wall mounting kit designed for use with MLS3500RF, MR3500DRF, MR3500RF detectors. This kit includes the necessary components for installation, such as screws, surface mount fittings, WMK bracket cover, adaptor ring, WMK bracket, and surface mount shell.
Specifications
- Compatible Detectors: MLS3500RF, MR3500DRF, MR3500RF
- Components: Screw x2, Surface mount fitting x2, WMK Bracket cover, Adaptor Ring, WMK Bracket, Surface mount Shell
Product Usage Instructions
Section 1: Remove Springs & Attach Shell
- Remove the two springs from the detector.
- Fit the surface mount fittings to the detector.
- Attach the surface mount shell to the detector.
Section 2: Mount Bracket
Note: Screws are not provided.
Mount the bracket on the wall or conduit box according to your installation requirements.
Section 3: Route Cables
Refer to the detector instructions for guidance on routing the cables.
Note: In racking aisle applications, mount the detector vertically.
Section 4: Fix to Bracket
- Offer the detector up to the bracket.
- Clip the adaptor ring to the detector.
- Fix the detector to the bracket using the two small screws provided.
Section 5: Connect Cables
- Refer to the appropriate detector installation instructions for detailed information on connecting the cables.
Section 6: Fix WMK Lid in Place
- Securely fix the WMK lid in place.
Section 7: Adjust Direction of View
- Use the two large screws provided to adjust the direction of view for the detector.
Section 8: Commission Detector
- Refer to the appropriate detector installation instructions for commissioning details.
FAQ
- Q: Can I use this wall mounting kit with other detectors?
- A: No, this wall mounting kit is only compatible with MLS3500RF, MR3500DRF, and MR3500RF detectors.
- Q: Are the screws provided with the kit?
- A: No, the screws for mounting the bracket and adjusting the direction of view are not provided with the kit.
- Q: How should I dispose of the packaging and product?
- A: At the end of their useful life, the packaging and product should be disposed of at a suitable recycling center. Do not dispose of them with normal household waste or burn them.
Important
Only suitably qualified personnel should install this equipment.
Introduction
The LSHDWMK is wall mounting kit compatible with MLS3500RF, MR3500DRF, MR3500RF detectors.
Contents
Installation Instructions
Remove Springs & Attach Shell
Mount Bracket
Note: screws not provided.
- On Wall
- Conduit Box
Note: Mount vertically in racking aisle applications.
Route Cables
- Refer to detector instructions
Fix to Bracket
- Offer detector up to the bracket, clip the adaptor ring to to detector and fix with the 2 small screws (supplied).
Connect Cables
- Refer to the appropriate detector installation instructions for connection details.
Fix WMK Lid in Place
Adjust Direction of View
Commission Detector
- Refer to the appropriate detector installation instructions for commissioning details.
© 2022 Honeywell International Inc. Ex-Or reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions or changes.
Honeywell
- St Marks Court, North Street Horsham, West Sussex RH12 1BW
- Tel: +44 (0)1942 719229
- Web: www.ex-or.com
EU contact for regulatory questions: PEHA Elektro GmbH & Co. KG Gartenstraße 49, 58511 Lüdenscheid Germany Web: www.peha.de
At the end of their useful life the packaging, and product should be disposed
of by a suitable recycling centre.
Do not dispose of with normal household waste. Do not burn.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>