EBL MP1000 Portable Power Station User Manual

MP1000 Portable Power Station
User Manual

MP1000 Portable Power Station

Thank you for purchasing MP1000 portable power station. To make sure your personal safety, property security and user experience, please read this manual carefully before operating,and retain it for future reference.
CHARGE FIRST!
Before using your new Power Station MP1000, plug it into a suitable power outlet until it is fully charged.Then you can start your exciting journey with it.

Feature Details

1. LCD Screen Display
2. DC 5525 Output
3. Cigarttle Lighter Socket Output
4. USB-C Output
5. USB-A Output
6. 1000W Rated AC Output
7. Anti-Collision Strip| 8. DC Input
9. PV Input
10. SOS Mode & LED Light
11. Folding Handle
12. Air Intake Vent with Cooling Fan
13. Wireless Charger
---|---

Note: No user-serviceable parts inside.
Recommended to fully charge the MP1000 before use.

MP1000 Accessory List

| | |
---|---|---|---
MC4-7909
Connector Cable| AC 100-240V Wall
Plug Power Adapter| 12V Car
Charger Cable| User Manual

Recommend to use 100W/200W Solar panel (not included).

Button Feature

A: MP1000 Power ON/OFF Button
B: SOS Mode & LED Light Button
C: DC Output Power ON/OFF Button
D: USB Output Power ON/OFF ButtoE: AC Output Power ON/OFF Button

Function Buttons

• Button A: MP1000 POWER ON/OFF
  Button A is the master switch. Press Button A to turn on the power or to shut down the output(s) when not in use.

• Button B: SOS MODE & LED LIGHT
  Function is available no matter the Button “POWER ON/OFF” is activated or not as the following steps:
  Firstly, press Button B to turn on the LED light into the LED light mode.
  Secondly, double click it to turn on the SOS mode. Thirdly, press Button B back to LED light mode, then press it again, the light will be turn off.

• Button C: DC OUTPUT POWER ON/OFF
  Pis. make sure the button “POWER ON/OFF” is activated before pressing Button C to turn on; Press Button C to shut down the output(s) when not in use.

• Button D: USB OUTPUT POWER ON/OFF
  Pis. make sure the button “POWER ON/OFF” is activated before pressing Button D to turn on; Press Button D to shut down the output(s) when not in use. The USB-C cable of different devices need different endorsements of corresponding protocols, if the USB-C port doesn’t work, try to use the AC adapter to charge.

• Button E: AC OUTPUT POWER ON/OFF
  Pis. make sure the button “POWER ON/OFF” is activated before pressing Button E to turn on; Press Button E to shut down the output (s) when not in use.

• Wireless Charger
  Pis. make sure the button”POWER ON/OFF” is activated before pressing Button D to turn on. Press Button D to shut down the output(s) when not in use.

• Cooling Fan
  MP1000 utilizes an internal cooling fan to ensure the product is operating within the appropriate temperature range. MP1000, when it experiences a higher output load, will automatically turn on the fan during discharge or recharging, the fan may operate intermittently to keep internal temperature within operating range. The fan will likely start when the AC circuit is activated to ensure proper operation.

LCD Features

H: Battery Level Indicator
I: Input Status
J: DC Outputs Status
K: AC Outputs Status
L: USB Outputs Status

Details Displayed On LCD

Battery Level Indicator:
The battery level is provided by percentage of battery charge correspond ing to the number of bars and percentage displayed. The segments in the battery level correspond to the current state of charge, 1-20% one segment, 21-40% two segments, 41-60% three segments, 61-80% four segments, and all five are lit when charge level is 81-100%.
Provides the user live telemetry data on time to completely charge, or deplete the battery based upon the energy entering or leaving the battery.
Highly recommend to fully charge MP1000 when first use. Higher battery level indicator show, more precise the data will indicate.
Please Be Aware that this value can adjust multiple times as the energy draw changes from the connected devices. This is evident during initial activation of ports with a connected device.
Recommended back to charge the MP1000 when battery indicate less than 20%. Note that when you first plug in a power source, whether it’s a solar panel or a wall charger, the MP1000 may take a minute to detect and adjust its charge circuitry before it starts drawing power from the source.
INPUT Status: The MP1000 is capable of providing input energy in watts.
DC Output Status: The display will provide output watts of the DC port.
AC Output Status: The display will provide output watts of the AC port.
Power-Saving Mode:
When the device enters the input or output state, it will enter the screen-off mode after more than 20 seconds, which does not affect the normal operation of the device. When the output power of the device is less than 5W, the device will go into hibernation after more than 3 hours, and the input can be “awakened” when the input is charged or any button is pressed. When not in use, press the switch button to turn off the output.

General Specs

| Rated Capacity| 999Wh
| Weight (Net Weight)| =8.5kg
| Weight (Including Accessories)| =9.5kg
| Product Size| 290mm202mm202mm
Input
| Recharging Input Voltage| 12-26V
| Recharging Input Power| 150W
| AC/DC Adapter| 150W MAX, AC 100-240V (50Hz/60Hz), DC 24V, 6.25A
| Solar Charge Input| 12-26V, DC 8A MAX
| Car Charger| DC 12V, 8A MAX
Output
| AC Output Voltage| 110V±10°/0/60Hz
| Rated Output Power| 1000W
| Output Waveform| Pure Sine Wave
| Overload Protection Power| 1100±80W
| Cigarttle Lighter Socket Output| 14V—8A(Max) (112W Max)
| DC 552.5 Output2
| Wireless Charger| 10W
| Usb Output| QC3.0/18W
| Output Type-C| PD60W
Battery
| Standard Capacity of Cells| 3.7V/270000mAh
| Discharging Temperature| 14 to 113°F (-10 to 45°C)
| Recharging Temperature| 32 to 104°F (0 to 40°C)

How To Charge

Do not connect device via ac output port while charge the MP1000. recommend to disconnect the MP1000 when fully charged.
It is recommended to fully charge MP1000 every 3 months to maintain the health of the battery pack.

• AC Adapter
  Charging It will take 7-8 hours to charge fully by using the AC adapter we provided.

Solar Panel Charging

1. DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V.
2. Place Solar Panels in direct sunlight as much as possible.
3. Support 60W/80W/100W/120W/150W/200W Max Solar Panels (Not included), the charging time is determined by the solar light intensity.

12V Car Charger Charging
Use the Car Charger we provided to charge this unit. The full charge time takes 9-11 hours. When the LCD display shows the battery power of 100%, it indicates that this unit is fully charged.

Powering/Charging Devices with MP1000
Select the type of outlet required by pressing the Output ON/OFF Button C/D/E. The output port will NOT function until the appropriate button is pressed to activate the port. When activated, the indicator on the button will illuminate green, indicating that the output (s) are active, and the LCD display will turn on and provide details on the charging output. The LCD Screen will automatically shut down when no outputs are activated.
Pass-through Charging
The advanced battery management system of the MP1000 allows it to charge a connected device via DC output & USB output while charge the MP1000.
Do Not Connected Device Via Ac Output While Charge The Mp1000.
Overload Condition If an overload condition occurs on the OUTPUT port, MP1000 will: Automatically turn off AC Output power. The blue indicator light of LCD Screen still illuminated. DC OUTPUT Status J still the same status as usual.
Do following:
Check the input charge cable. The port will be efficient when the input charge cable meets the specification outlined in the General Specifications section. Only charge MP1000 with provided AC wall power adapter.

What It Powers

Safety Instructions

Read the following instructions to ensure safety before using. Improper use may result in fire, property damage or personal injury.

Product Use:

• DO NOT use any inappropriate power cords.
• DO NOT place the unit close to or in a fire on expose it to heat. Keep out of direct sunlight.
• DO NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture. Do not drop the unit into the water. If the battery in the unit comes into contact with water, it may cause chemical decomposition of the battery. This may cause the battery to catch fire or explode. Never use or charge swollen, leaky, or damaged batteries. If your battery is abnormal, contact us to get support.
• Never install or remove a battery from the unit when it is turned on.
• DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious accident.
• Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
• DO NOT use the product if it was involved in a crash or a heavy bump.
• If the product falls into the water during use,take the product out immediately and put it in a safe and open area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as described in the Battery Disposal section below. If the product catches fire, it is recommended to use fire extinguishing equipment in the following: sand, fire blanket, dry powder, carbon dioxide fire extinguisher.
• Do Not allow pins, wires or other metal pieces to insert to the device case, outlets or controls. Metal pieces may short circuit the product.
• Avoid collision. DO NOT place heavy objects on the machine.
• Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
• If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and result in energy loss or inability to charge.
• DO NOT put the machine in a microwave oven or in a pressurized container.

Product Recharging:

• DO NOT charge the unit via power supply systems that operate outside of AC 100-240V.
• DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V.
• Always use approved attachment charging cables, we take no responsi-bility for any damage caused by using other brand charging cable.
• When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine unattended during charging.
• DO NOT charge a product immediately after a long heavy load, because the product’s temperature may be too high. DO NOT charge a product until it cools down to room temperature.
• Only charge, use the unit within an ambient temperature of 0 to 40°C (32-104°F). The ideal charging temperature range is 71°F to 82°F(22°C to 28°C).

Product Storage and Transportation:

• Keep the product out of the reach of children. If any children accidentally swallow parts, please go to a doctor immediately.
• If a low-battery warning appears, charge the battery before store it.
• Store the product in dry environments. DO NOT place the product where it may contact with water.
• Make sure no small metal objects can fall on or around the product while in storage.
• Never transport a product by air when battery power level higher than 30%.

Product Maintenance:

• Never store the product in environments below -20°C or above 45°C.
• Battery life may be reduced if not used for a long time.
• Fully charge and discharge the battery at least once every 3 months to maintain battery health.

Cleaning

Be sure that MP1000 is disconnected from all input power sources and output devices. Use a clean, dry, soft-lint-free cloth to wipe down it. Remove any debris, dirt, or other blockages on both side vents. When cleaning debris from the side vents, do not allow the debris, dirt, or other blockages to enter the body of MP1000.
DO NOT use abrasive cleaners or solvents.
DO NOT use compressed air to clean side cooling vents, as this will force foreign particles into the internal circuitry.
To avoid the risk of electrical shock, DO NOT use metal objects to cleanports.

Storage

If storing for more than 1 month, charge completely before storage and recharge approximately every 3 months to avoid full discharge and possible damage.
Store indoors, in cool temperatures, mild humidity, and away from direct sunlight (See General Specifications Section). Leaving in a vehicle or other confined spaces in extreme hot.
Temperatures can lead to decreased service life, overheating, and fire. Extreme cold conditions below specific storage range can also harm MP1000 performance and service life. Keep away from corrosion chemicals and gases.
After taking out of storage, visually inspect to make sure MP1000 and all accessories look satisfactory. This increase review the intake and exhaust side vents to ensure they are clear of debris. Allow MP1000 to return to ambient conditions before recharging, or charging other devices.

Attention

Transportation: MP1000 complies with all legal requirements for transport of dangerous goods. The capacity of the lithium battery pack exceeds 1 00Wh.
Based on international standards, if MP1000 is transported by airplane, it must be transported in accordance with IATA standard packaging. IATA instructions and labeling requirements and the relevant declarations must be completed.

| Not Permitted on Aircrafts
---|---
| To Preserve The Battery Lifespans, Please Use and Recharge at Least Once Every 3 Months
| Use Original or Cerified Charger and Cables
| Avoid Extreme Temperature
| Avoid Dropping
| Do Not Disassemble
| It’s Not Waterproof, do Not Expose to Liquids
| Please Dispose of Batteries And Electronic Goods in Accordance with Local Regulations

Note
A photovoltaic panel as input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL 1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-1 and CAN/CSA C22.2 No. 60950-1, or UL 1310 and No. 1, CAN/CSA C22.2 No. 223, or No.1, CAN/CSA C22.2 No. 223; A vehicle adapter that complies with the enclosure and input contacts requirements in the Standard for Vehicle Battery Adapters, UL 2089, and Power Supplies, CAN/CSA C22.2 No. 107 .1. The connector plug shall incorporate a fuse or other protective device having a current rating not greater than 15 A.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS

1. WARNING -When using this product, basic precautions should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
e) To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
f) Do not use a battery pack or appliance that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
g) Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
h) Do not disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
i) To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.
j) WARNING — RISK OF EXPLOSIVE GASES.

1. To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary marking on these products and on engines.
   k) PERSONAL PRECAUTIONS
2. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
3. Wear complete eye protection and clothing protection. Avoid touching eyes while working near the battery.
4. If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters the eye, immediately flood the eye with running cold water for at least 10 minutes and get medical attention immediately.
5. NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
6. Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might spark or short-circuit battery or other electrical parts that may cause an explosion.
   I) When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
   m) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
   n) Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion. The temperature of 130°C can be replaced by the temperature of 265°F.
   o) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
   SAVE THESE INSTRUCTIONS.

FCC Note
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC ID: 2A4UPMP1000MV1000

Troubleshooting

MP1000 Will Not Charge or Operate connected devices:
Ensure that the DC/USB/AC output ports are activated by pressing the Button (s) A & C/D/E for the port(s) in use.
Confirm the connected device is suitable for the MP1000 by reviewing the output specifications provided in the General Specifications section. Confirm MP1000 is charged by reviewing the Battery Level Indicator H. Verify the watt data displayed on the Status Indicator I/J/K of LCD Screen for overload condition.
MP1000 Will Not Charge:
Confirm that the wall plug power adapter’s cord is inserted fully into the DC Input. Confirm that the AC wall plug power adapter is the charger provided with MP1000. If the input does not comply with the requirements located in the General Specifications section, the Low Watt range Oto 10 may be displayed on. Input Status I of LCD screen.

Maintenance

Recharge as needed. There are no pre-designated intervals at which to recharge as long as the MP1000 is being used regularly. Avoid discharging completed on a regular basis, as this can impact overall life.
Regularly inspect all ports and wall charger for any debris, dirt, damage and corrosion.
DO NOT attempt to fix.
DO NOT cover the MP1000 with towels, clothing or other items.
Regularly observe if the side vents are collecting dirt or dust, and clean following cleaning procedures noted in manual.

Disposal/recycle

Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations.
See www.epa.gov for additional information.

Statement
Copyright EBL. All rights reserved. All trademarks cited herein are the property of their respective owners.

Limited Warranty

We warrant to the original consumer purchaser that our product will be free from defects in workmanship and material under normal consumer use during applicable warranty period identified in the “Warranty Period” section below, subject to the exclusion set forth below. This warranty statement sets forth ours total and exclusive warranty obligation. We will not assume, not authorize any person to assume for us, any other liability in connection with the sale of our products.
Warranty Period
The warranty period is 12 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order establish the start date of the warranty period.
Remedy
We will repair or replace any our products that fails to operate during the applicable warranty period due to defect in workmanship or material. If a valid claim is made during the applicable period,We, at its option, will either replace the product. A replacement product assumes the remaining warranty of the original product or ninety (90) days from the date of replacement, whichever is greater. Customer is responsible for the return shipping costs.
Limited To Original Consumer Buyer
The warranty on ours product is limited to the original consumer purchaser and to any subsequent owner.
Exclusions
Our warranty does not apply to (1) any product that is damages caused by fire, earthquak, use by a third party, other accidents, intentional miscoduct on the part of the customer, abuse or other abnormal conditions. or used for anything other than normal consumer use as authorized in EBL’s current product literature, or (2) any product purchased through an online auction house. Ours warranty does not apply to the battery cell unless the battery cell is fully charged by you within 7 days after you purchase the product at least every months thereafter.
How To Receive Service
To obtain warranty service, contact our customer service team at service@eblmall.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>