KENWOOD JMP60 PureJuice Juicer Instructions

: June 13, 2024
: KENWOOD

Table of Contents

KENWOOD JMP60 PureJuice Juicer
Product Information
Product Usage Instructions
Safety
key
USING YOUR JUICER
Health Recommendations
care and cleaning
Troubleshooting guide
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KENWOOD JMP60 PureJuice Juicer

Product Information

The product is a juicer with the model number JMP60. It is designed for domestic use and conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food. The juicer comes with various components including a pusher, lid with hopper, scroll, filter basket, rotating wiper holder, juicing bowl, pulp spout, pulp container, power unit, juice spout, anti-drip stopper, reset button, On/Off/Reverse switch, juice jug, clip on sieve, cleaning brush, and sorbet attachment (if supplied).

Product Usage Instructions

Fit the pulp stopper (A) into the opening on the underside of the juicing bowl (6) and push in until secure (B).
Fit the juicing bowl (6) to the power unit by aligning the symbols on the side of the bowl with the symbols on the power unit (C). To lock the bowl, turn it clockwise until the symbols line up (D). Place the filter basket (4) into the wiper holder (5) (E).
Lower the wiper holder assembly into the juicing bowl and align the symbols with the symbol on the top of the power unit (F). Ensure that the filter basket is locked into place.
Place the scroll (3) into the filter basket and push down to secure (G).
Note : the lid cannot be fitted if the scroll is not fully pushed down.
Fit the lid (2) onto the unit ensuring the symbols line up with the symbol on top of the power unit (H). Then turn the lid clockwise until it clicks into place and the symbols line up (I). Place the food pusher (1) into the feed tube.
Place the pulp container (8) under the pulp spout (7) and place the juice jug (bo) under the juice spout (bk). Ensure the anti-drip stopper (bl) is in the open position (J) before juicing.
Switch on (bn) and feed the food items down the feed tube,using the food pusher to push them through. Keep the anti-drip stopper (bl) in position (K) before removing it.
If a smooth juice is preferred, use the clip on sieve (bp) provided. Empty the sieve when full or after every 1kg of juicing.
Refer to the recommended usage chart for juicing different fruits and vegetables.

Note : Please read the safety instructions provided in the user manual carefully before using the juicer.

Safety

Read these instructions carefully and retain for future reference.
Remove all packaging and any labels.
Do not use the juicer if the filter is damaged.
Never put the power unit, cord or plug in water – you could get an electric shock.
Switch off and unplug:
- before fitting or removing parts
- before cleaning
- after use.
Never use a damaged juicer. Get it checked or repaired: see ‘Service and customer care’.
Only use the pusher supplied. Never put your fingers in the feed tube. Unplug and remove the lid before unblocking the feed tube.
Before removing the lid, switch it off and wait for the filter to stop.
Do not over-fill the feed tube or use excessive force to push the food down the feed tube – you could damage your juicer.
Do not process frozen fruit or vegetables. Allow to defrost before processing.
Do not process dried or hard ingredients such as grains, fruit with hard seeds or ice as they may damage the juicer.
Do not touch moving parts.
Never leave the juicer switched on unattended.
Never use an unauthorized attachment.
Never process frozen ingredients that have formed a solid mass during freezing, break it up before processing.
The sorbet attachment is not suitable for processing ice cubes.
Children should be supervised to ensure that they do not play with the appliance.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Misuse of your appliance can result in injury.
Do not let the cord touch hot surfaces or hang down where a child could grab it.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

Before plugging in

Make sure your electricity supply is the same asthe one shown on the underside of the appliance.
WARNING : THIS APPLIANCE MUST BE EARTHED.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food. before using for the first time Wash the parts: see ‘care and cleaning’.

key

pusher
lid with hopper
scroll
filter basket
rotating wiper holder
juicing bowl
pulp spout
pulp container
power unit
juice spout
anti-drip stopper
reset button
On/Off/Reverse switch
juice jug
clip on sieve
cleaning brush
sorbet attachment (if supplied)

USING YOUR JUICER

Fit the pulp stopper (A) into the opening on the underside of the juicing bowl 6 and push in until secure (B).
Fit the juicing bowl 6 to the power unit by aligning the ? on the side of the bowl with the on the power unit (C). To lock the bowl on turn it clockwise until the line up with the on the power unit (D).
Place the filter basket ( into the wiper holder § (E).
Lower the wiper holder assembly into the juicing bowl and align the with the – on the top of the power unit ( F). Ensure that the filter basket is locked into place.
Place the scroll (3) into the filter basket and push down to secure (G).
Note : the lid cannot be fitted if the scroll is not fully pushed down.
Fit the lid © onto the unit ensuring the ?al lines up with the on top of the power unit (H). Then turn the lid clockwise until it clicks into place and the lines up with the I on top of the power unit (I). Place the food pusher O into the feed tube.
Place the pulp container (8 under the pulp spout and place the juice jug © under the juice spout W. Ensure the anti-drip stopper y is in the open position (J) before juicing
- There is a clip on sieve t provided, this can be used if a smooth juice is preferred and should be emptied when full or after every 1kg of juicing.
- Use the recommended usage chart as a guide for juicing different fruits and vegetables.
Switch on 13 and feed the food items down slowly using the pusher.
Note : The wiper holder is designed to rotate during operation.
- To extract the maximum amount of juice, always push the food down slowly using the pusher. Do not use excessive force as the food should be pulled down by the scroll.
- If the food becomes jammed in the feed tube oron the scroll and the juicer stops operating switch to the ‘ off position. Then press and hold the “R’ reverse button down until the food becomes dislodged. Once the food is released, you can start juicing again.
After adding the last piece of food, allow the juicer to run to help clear the juice from the juicing bowl. The time will vary depending on the fruit type and thickness of the juice extracted.
Switch off and wait until the final flow of juice has reduced to a few slow drips. Then place the anti- drip stopper © in position (K) before removing the jug.

Refer to the troubleshooting

section if you experience any problems with the operation of the juicer. juicer hints and tips

Wash all fruit and vegetable thoroughly before juicing.
To maximise juice extraction place small quantities at a time in the feed tube and push down slowly.
Hard foods are best juiced at room temperature
You do not have to remove thin peels or skins. Only remove thick peels that you would not eat e.g. those of oranges, pineapples, melons and uncooked beetroots.
Use fresh fruit and vegetables as they contain more juice.
Remove stones and hard seeds from cherries, plums etc.
Vitamins disappear – the sooner you drink your juice, the more vitamins you will get.
If you need to store the juice for a few hours put it in the fridge. It will keep better if you add a few drops of lemon juice.

Health Recommendations

Do not drink more than three 230mls (8 fl.oz.) glasses of juice a day unless you are used to it.
Dilute juice for children with an equal amount of water.
Juice from dark green (broccoli, spinach etc.) or dark red (beetroot, red cabbage etc.) vegetables is extremely strong, so always dilute it.
Fruit juice is high in Fructose (fruit sugar), so people with diabetes or low blood sugar should avoid drinking too much.

Sorbet attachment (if supplied)

Allow frozen food items to thaw for 5 to 10 minutes before processing. (The time required for thawing will depend how long ingredients have been stored in the freezer).

Assemble the parts as per ‘using your juicer’ section.
Fit the sorbet attachment 17 instead of the wiper holder 5 and filter basket 4
Ensure the anti-drip stopper © is in the open position ( J)before processing.
After the last piece of food has been added allow the flow from the juicer to stop before switching the unit off.

Sorbet attachment hints and tips

Remove hard skins and seeds from ingredients before freezing.
Cut whole fruits such as apples, oranges and kiwi to fit the feed tube before freezing. Freeze pieces in a single layer to prevent them from forming a solid mass.
Ingredients that have formed a solid mass during freezing, break up before processing.
Process cubes of frozen yoghurt with your chosen fruit to produce a creamy ‘iced dessert’

care and cleaning

Always switch off, unplug and take the juicer apart before cleaning.
Some discolouration of parts may occur upon using ingredients such as carrot or leafy vegetables.
Cleaning all parts immediately after each use will help to reduce stains.
filter
To assist with removal of pulp and fibres, place the anti-drip stopper in the closed position. Switch the juicer on and pour approximately 300mls water down the feed tube. Operate the juicer for approximately 20 seconds, place the juice jug under the juice spout and open the stopper to allow the water to flow out.
Always clean the filter basket immediately after juicing.
Use the brush supplied to clean the filter. For best results, rinse under water and brush until clear.
wiper holder
The wipers in the filter holder can be removed for cleaning (L). To assemble, Insert the upper/lower wipers into the gap of the filter holder and secure (M). Ensure that the wipers are replaced and fitted correctly before assembling the juicer
Do not clean the pulp or filter outlet with a sharp pointed object such as the end of a knife as you will damage the bowl. Use the tip of the cleaning brush handle to clean the outlets.
power unit
Wipe with a damp cloth, then dry.
Do not immerse in water.

service & customer care

l If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
l If you experience any problems with the operation of your appliance, before requesting assistance refer to the “troubleshooting guide” section in the manual or visit www.kenwoodworld.com.
l Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
l If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorized KENWOOD Service Centre. To find up-to-date details of your nearest authorized KENWOOD Service center visit www.kenwoodworld.com or the website specific to your Country.
l Designed and engineered by Kenwood in the UK.
Made in China

IMPORTANT : INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.